[FS#861] ath9k doesn't respect setting country and stuck at max TX 18 dBm
LEDE Bugs
lede-bugs at lists.infradead.org
Tue Jun 20 16:08:23 PDT 2017
A new Flyspray task has been opened. Details are below.
User who did this - ahpaedai (ahpaedai)
Attached to Project - LEDE Project
Summary - ath9k doesn't respect setting country and stuck at max TX 18 dBm
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - lede-17.01
Due in Version - Undecided
Due Date - Undecided
Details - Device: TP-Link WR741ND v4
OS: LEDE 17.01.2, also tried compile trunk with ATH_USER_REGD=y
I tried set country via iw reg set TW and via /etc/config/wireless and reboot router - no matter, ath9k ignore this settings.
root at lede:~# iw reg get
global
country TW: DFS-FCC
(2400 - 2483 @ 40), (N/A, 30), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5470 - 5725 @ 160), (N/A, 23), (0 ms), DFS
(5725 - 5850 @ 80), (N/A, 30), (N/A)
phy#0
country US: DFS-FCC
(2402 - 2472 @ 40), (N/A, 30), (N/A)
(5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5735 - 5835 @ 80), (N/A, 30), (N/A)
(57240 - 63720 @ 2160), (N/A, 40), (N/A)
Look, phy#0 always "country US" and max TX 18 dBm
root at lede:~# iw dev
phy#0
Interface wlan0
ifindex 8
wdev 0x3
addr 10:fe:ed:xx:xx:xx
ssid LEDE
type AP
channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
txpower 18.00 dBm
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=861
More information about the lede-bugs
mailing list