[FS#851] WNR2200 USB Port don't functioned andin the Bugfixed Driver from OpenWRT some LEDs don't functioned

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - Kai (ChaosKai) 

Attached to Project - LEDE Project
Summary - WNR2200 USB Port don't functioned andin the  Bugfixed Driver from OpenWRT some LEDs don't functioned
Task Type - Bug Report
Category - Kernel
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - All
Due in Version - Undecided
Due Date - Undecided
Details - The USB Port don't became the right power from the right GPIO.

- Netgear WNR2200
- LEDE 17.01.2 (stable, unstable, trunk)
- Flash an image with the unmodified driver target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c

Hello,

it's an known and partially solved bug in OpenWRT but not solved in the LEDE sources. Now the sources from OpenWRT source solve the problem with the Power but some leds (wlan especially) don't functioned and the original from LEDE source trigger the right GPIOs for the LEDs and this functioned well, but the usb port don't became power and extroot don't functioned.

Now i have used this source from http://git.openwrt.org/?p=openwrt.git;a=commit;h=95f36ebcd774a8e93ad2a1331f45d1a9da4fe8ff and recompiled LEDE from scratch and how i wrote wlan-led as an example don't functioned but the usb port became power and block info make the usb stick viewable.

Thx.

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=851