[FS#442] BTHomeHub5 Type A Broadband LED fails to flash on reboot

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - Mauro Mozzarelli (ezplanet) 

Attached to Project - LEDE Project
Summary - BTHomeHub5 Type A Broadband LED fails to flash on reboot
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - Device problem occurs on BT Home Hub 5 Type A
 - Software versions of LEDE release, packages, etc. : from r3186 (latest OK was r3157)
 - Steps to reproduce

Configure the the ADSL LED as follows:

config led 'led_internet'
        option name 'internet'
        option sysfs 'bthomehubv5a:blue:broadband'
        option trigger 'netdev'
        option mode 'link tx rx'
        option dev 'pppoa-wan'
        option default '0'

the "b" Broadband LED should light in blue and blink on tx and rx however on first boot, once the DSL link is established it becomes solid blue, but it does not blink on rx tx.

If the line is shutdown and restarted with:

/etc/init.d/dsl_control stop
/etc/init.d/dsl_control start

once the link is established the LED becomes solid blue and it DOES blink on rx and tx

up to trunk r3157 it was working as expected.
my next git pull and build is trunk r3186. It is from this version that I started noticing the above defect.

 

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=442