[FS#393] [17.01] D-Link DIR-600 A1 images do not build with LuCI included

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - Borromini (Borromini) 

Attached to Project - LEDE Project
Summary - [17.01] D-Link DIR-600 A1 images do not build with LuCI included
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Gemiddeld
Priority - Normaal
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Someone reported [[https://forum.lede-project.org/t/solved-why-no-images-generated-for-default-d-link-dir-600a1/990/10|on the forum]] that he was unable to build an image including LuCi for this 4 MB device.

I have tested this myself since it looked peculiar, and I set the build  to run for both the TL-WR841N v7 (4 MB as well) and the DIR-600 A1. The images for the former build, the latter don't:

1+0 records in
1+0 records out
1310262 bytes (1.3 MB, 1.2 MiB) copied, 0.00242325 s, 541 MB/s
padding image to 00360000
Warning: /var/data/code/lede/main/bin/targets/ar71xx/generic/lede-ar71xx-generic-dir-600-a1-squashfs-sysupgrade.bin is too big (> 3538944 bytes)
if [ -e "/var/data/code/lede/main/bin/targets/ar71xx/generic/lede-ar71xx-generic-dir-600-a1-squashfs-sysupgrade.bin" ]; then factory_size=$((3801088 - 65536)); ( dd if=/var/data/code/lede/main/bin/targets/ar71xx/generic/lede-ar71xx-generic-dir-600-a1-squashfs-sysupgrade.bin bs=${factory_size} conv=sync; echo -n "AP91-AR7240-RT-090223-00"; ) > /var/data/code/lede/main/bin/targets/ar71xx/generic/lede-ar71xx-generic-dir-600-a1-squashfs-factory.bin; fi
make[6]: Leaving directory '/var/data/code/lede/main/target/linux/ar71xx/image'


Diffconfig:

$ ./scripts/diffconfig.sh
CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_DEVICE_DIR600A1=y
CONFIG_PACKAGE_libiwinfo-lua=y
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libubus-lua=y
CONFIG_PACKAGE_libuci-lua=y
CONFIG_PACKAGE_lua=y
CONFIG_PACKAGE_luci=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-lib-ip=y
CONFIG_PACKAGE_luci-lib-jsonc=y
CONFIG_PACKAGE_luci-lib-nixio=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y   

I think a stable release doesn't include anything more (or less) than these extra packages, so it looks like the DIR-600 A1 images don't build anymore for the upcoming release (or with trunk when LuCI's selected).

 

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=393