[FS#385] rampis / JFFS2-problem / Xiaomi Miwifi mini / r2919 / wrong erase size?

LEDE Bugs lede-bugs at lists.infradead.org
Fri Jan 13 08:37:52 PST 2017


The following task has a new comment added:

FS#385 - rampis / JFFS2-problem / Xiaomi Miwifi mini / r2919 / wrong erase size?
User who did this - Bastian Bittorf (bittorf)

----------
is does work! the zram-problem message is there since ages, but zram is working. here the output of the new image, which a produced like this:

make menuconfig (my changes)
make target/linux/clean
# apply your patch
make

scp + sysupgrade image

her the diffconfig just in case:

bastian at LEDE:~/ledebot/source$ ./scripts/diffconfig.sh
CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7620=y
CONFIG_TARGET_ramips_mt7620_DEVICE_miwifi-mini=y
CONFIG_BUSYBOX_CUSTOM=y
CONFIG_BUSYBOX_CONFIG_ARPING=y
# CONFIG_BUSYBOX_CONFIG_FEATURE_IP_RULE is not set
CONFIG_BUSYBOX_CONFIG_FEATURE_SWAPON_PRI=y
CONFIG_BUSYBOX_CONFIG_NC_110_COMPAT=y
CONFIG_BUSYBOX_CONFIG_NC_EXTRA=y
CONFIG_BUSYBOX_CONFIG_NC_SERVER=y
CONFIG_BUSYBOX_CONFIG_SWAPONOFF=y
CONFIG_BUSYBOX_CONFIG_TELNET=y
CONFIG_PACKAGE_block-mount=y
# CONFIG_PACKAGE_firewall is not set
CONFIG_PACKAGE_ip-full=y
CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
CONFIG_PACKAGE_iptables-mod-ipopt=y
CONFIG_PACKAGE_iptables-mod-nat-extra=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-fs-vfat=y
CONFIG_PACKAGE_kmod-ifb=y
CONFIG_PACKAGE_kmod-ipip=y
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
CONFIG_PACKAGE_kmod-ipt-ipopt=y
CONFIG_PACKAGE_kmod-ipt-nat-extra=y
CONFIG_PACKAGE_kmod-ipt-raw=y
CONFIG_PACKAGE_kmod-iptunnel=y
CONFIG_PACKAGE_kmod-iptunnel4=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-lz4=y
CONFIG_PACKAGE_kmod-lib-lzo=y
CONFIG_PACKAGE_kmod-macvlan=y
CONFIG_PACKAGE_kmod-nls-cp437=y
CONFIG_PACKAGE_kmod-nls-iso8859-1=y
CONFIG_PACKAGE_kmod-nls-utf8=y
CONFIG_PACKAGE_kmod-sched=y
CONFIG_PACKAGE_kmod-sched-core=y
CONFIG_PACKAGE_kmod-scsi-core=y
CONFIG_PACKAGE_kmod-tun=y
CONFIG_PACKAGE_kmod-usb-ledtrig-usbport=y
CONFIG_PACKAGE_kmod-usb-storage=y
CONFIG_PACKAGE_kmod-usb-storage-extras=y
CONFIG_PACKAGE_kmod-zram=y
CONFIG_PACKAGE_liblzo=y
CONFIG_PACKAGE_librrd1=y
CONFIG_PACKAGE_olsrd=y
CONFIG_PACKAGE_olsrd-mod-dyn-gw-plain=y
CONFIG_PACKAGE_olsrd-mod-jsoninfo=y
CONFIG_PACKAGE_olsrd-mod-nameservice=y
CONFIG_PACKAGE_olsrd-mod-txtinfo=y
CONFIG_PACKAGE_olsrd-mod-watchdog=y
CONFIG_PACKAGE_resolveip=y
CONFIG_PACKAGE_rrdtool1=y
CONFIG_PACKAGE_tc=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_vtun=y
CONFIG_PACKAGE_wireless-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_PACKAGE_zram-swap=y
CONFIG_PROCD_SHOW_BOOT=y
CONFIG_STRIP_ARGS="--strip-all"
CONFIG_TARGET_SQUASHFS_BLOCK_SIZE=64
# CONFIG_USE_SSTRIP is not set
CONFIG_USE_STRIP=y
CONFIG_VTUN_LZO=y
# CONFIG_PACKAGE_libopenssl is not set
# CONFIG_VTUN_SSL is not set
bastian at LEDE:~/ledebot/source$ 


here new dmesg without any errors:

root at xiaomi-mini-TV:~ :) cat /tmp/dmesg.log 
[    0.000000] Linux version 4.4.40 (bastian at LEDE) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2919+14-1d911fa) ) #0 Fri Jan 13 16:05:53 2017
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is Xiaomi MiWiFi Mini
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803903d0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00025000
[    0.000000] Readback ErrCtl register=00025000
[    0.000000] Memory: 125740K/131072K available (2912K kernel code, 140K rwdata, 700K rodata, 144K init, 203K bss, 5332K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.007568] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.070067] pid_max: default: 32768 minimum: 301
[    0.074694] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081063] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.094720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.104421] pinctrl core: initialized pinctrl subsystem
[    0.110173] NET: Registered protocol family 16
[    0.377818] PCI host bridge /pcie at 10140000 ranges:
[    0.382426]  MEM 0x0000000020000000..0x000000002fffffff
[    0.387490]   IO 0x0000000010160000..0x000000001016ffff
[    0.401350] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.406740] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.412963] rt2880_gpio 10000638.gpio: registering 16 gpios
[    0.418330] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[    0.424522] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.429889] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.436725] PCI host bridge to bus 0000:00
[    0.440653] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.447364] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.453068] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.459670] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.467393] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
[    0.467441] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    0.467465] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
[    0.467539] pci 0000:00:00.0: supports D1
[    0.467558] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.468032] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    0.468109] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    0.468171] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.468263] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.468525] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.468554] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.468610] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.475020] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.481738] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.488340] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.495344] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.501957] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.509054] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.516063] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.520874] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.527476] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.534495] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
root at xiaomi-mini-TV:~ :) cat /tmp/dmesg.log 
[    0.000000] Linux version 4.4.40 (bastian at LEDE) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2919+14-1d911fa) ) #0 Fri Jan 13 16:05:53 2017
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is Xiaomi MiWiFi Mini
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803903d0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00025000
[    0.000000] Readback ErrCtl register=00025000
[    0.000000] Memory: 125740K/131072K available (2912K kernel code, 140K rwdata, 700K rodata, 144K init, 203K bss, 5332K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.007568] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.070067] pid_max: default: 32768 minimum: 301
[    0.074694] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081063] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.094720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.104421] pinctrl core: initialized pinctrl subsystem
[    0.110173] NET: Registered protocol family 16
[    0.377818] PCI host bridge /pcie at 10140000 ranges:
[    0.382426]  MEM 0x0000000020000000..0x000000002fffffff
[    0.387490]   IO 0x0000000010160000..0x000000001016ffff
[    0.401350] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.406740] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.412963] rt2880_gpio 10000638.gpio: registering 16 gpios
[    0.418330] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[    0.424522] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.429889] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.436725] PCI host bridge to bus 0000:00
[    0.440653] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.447364] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.453068] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.459670] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.467393] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
[    0.467441] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    0.467465] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
[    0.467539] pci 0000:00:00.0: supports D1
[    0.467558] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.468032] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    0.468109] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    0.468171] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.468263] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.468525] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.468554] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.468610] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.475020] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.481738] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.488340] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.495344] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.501957] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.509054] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.516063] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.520874] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.527476] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.534495] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[    0.540160] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    0.546858] clocksource: Switched to clocksource systick
[    0.553519] NET: Registered protocol family 2
[    0.558653] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.565378] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.571599] TCP: Hash tables configured (established 1024 bind 1024)
[    0.577821] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.583446] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.589854] NET: Registered protocol family 1
[    0.594128] PCI: CLS 80 bytes, default 32
[    0.598949] rt-timer 10000100.timer: maximum frequency is 1220Hz
[    0.605739] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.611792] Crashlog allocated RAM at address 0x3f00000
[    0.632709] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.638391] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.650741] io scheduler noop registered
[    0.654500] io scheduler deadline registered (default)
[    0.659799] ralink-usb-phy usbphy: invalid resource
[    0.665195] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.672552] console [ttyS0] disabled
[    0.676000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[    0.685682] console [ttyS0] enabled
[    0.692713] bootconsole [early0] disabled
[    0.705635] spi spi0.0: force spi mode3
[    0.710175] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.715030] 7 ofpart partitions found on MTD device spi0.0
[    0.720673] Creating 7 MTD partitions on "spi0.0":
[    0.725568] 0x000000000000-0x000000030000 : "u-boot"
[    0.732423] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.739789] 0x000000040000-0x000000050000 : "factory"
[    0.746787] 0x000000050000-0x000000fd0000 : "firmware"
[    2.059652] 2 uimage-fw partitions found on MTD device firmware
[    2.065726] 0x000000050000-0x0000001853a5 : "kernel"
[    2.072493] 0x0000001853a5-0x000000fd0000 : "rootfs"
[    2.079489] mtd: device 5 (rootfs) set to be root filesystem
[    2.085417] 1 squashfs-split partitions found on MTD device rootfs
[    2.091797] 0x000000500000-0x000000fd0000 : "rootfs_data"
[    2.099230] 0x000000fd0000-0x000000fe0000 : "crash"
[    2.106035] 0x000000fe0000-0x000000ff0000 : "reserved"
[    2.113207] 0x000000ff0000-0x000001000000 : "Bdata"
[    2.123239] gsw: setting port4 to ephy mode
[    2.127607] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[    2.137138] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[    2.143986] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    2.153020] rt2880_wdt 10000120.watchdog: Initialized
[    2.159777] NET: Registered protocol family 10
[    2.168960] NET: Registered protocol family 17
[    2.173590] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.186531] 8021q: 802.1Q VLAN Support v1.8
[    2.206335] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    2.214392] Freeing unused kernel memory: 144K (803ac000 - 803d0000)
[    3.820145] init: Console is alive
[    3.823835] init: - watchdog -
[    6.603291] usbcore: registered new interface driver usbfs
[    6.609101] usbcore: registered new interface driver hub
[    6.614630] usbcore: registered new device driver usb
[    6.734493] SCSI subsystem initialized
[    6.744702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.753075] ehci-platform: EHCI generic platform driver
[    6.768813] phy phy-usbphy.0: remote usb device wakeup disabled
[    6.774861] phy phy-usbphy.0: UTMI 16bit 30MHz
[    6.779440] ehci-platform 101c0000.ehci: EHCI Host Controller
[    6.785338] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    6.793552] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.805873] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.813413] hub 1-0:1.0: USB hub found
[    6.817694] hub 1-0:1.0: 1 port detected
[    6.824920] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.832819] ohci-platform: OHCI generic platform driver
[    6.838491] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.845470] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.853684] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.884271] hub 2-0:1.0: USB hub found
[    6.888480] hub 2-0:1.0: 1 port detected
[    6.900020] usbcore: registered new interface driver usb-storage
[    6.910624] init: - preinit -
[    7.691820] 8021q: adding VLAN 0 to HW filter on device eth0
[    7.765775] random: procd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[    8.918193] mount_root: loading kmods from internal overlay
[   11.351079] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.367841] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   11.386572] block: extroot: not configured
[   12.838560] jffs2: notice: (374) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   13.817806] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   13.832166] block: extroot: not configured
[   13.837544] mount_root: switching to jffs2 overlay
[   13.861313] urandom-seed: Seeding with /etc/urandom.seed
[   13.931679] procd: - early -
[   13.934734] procd: - watchdog -
[   14.544657] procd: - ubus -
[   14.644497] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.654290] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.663607] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.673270] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.682546] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.691982] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.701400] random: ubusd: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
[   14.711056] procd: - init -
[   18.158926] random: ubusd: uninitialized urandom read (4 bytes read, 34 bits of entropy available)
[   18.259431] random: ubusd: uninitialized urandom read (4 bytes read, 34 bits of entropy available)
[   19.438945] zram: Unknown symbol lz4_compress (err 0)
[   19.444307] zram: Unknown symbol lz4_decompress_unknownoutputsize (err 0)
[   30.553486] zram: Added device: zram0
[   30.587766] tun: Universal TUN/TAP device driver, 1.6
[   30.592935] tun: (C) 1999-2004 Max Krasnyansky 
[   30.619294] ipip: IPv4 over IPv4 tunneling driver
[   30.645881] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   30.672347] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   30.680156] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   31.000981] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   31.012524] mt76x2e 0000:01:00.0: ROM patch already applied
[   31.144450] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   31.150065] mt76x2e 0000:01:00.0: Build: 1
[   31.154279] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   31.169487] mt76x2e 0000:01:00.0: Firmware running!
[   31.175345] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   31.220086] u32 classifier
[   31.222861]     input device check on
[   31.226592]     Actions configured
[   31.251491] Mirror/redirect action on
[   31.311559] ip_tables: (C) 2000-2006 Netfilter Core Team
[   31.351239] nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
[   31.446962] usbcore: registered new interface driver ums-alauda
[   31.461450] usbcore: registered new interface driver ums-cypress
[   31.479271] usbcore: registered new interface driver ums-datafab
[   31.497036] usbcore: registered new interface driver ums-freecom
[   31.511597] usbcore: registered new interface driver ums-isd200
[   31.531752] usbcore: registered new interface driver ums-jumpshot
[   31.550023] usbcore: registered new interface driver ums-karma
[   31.572321] usbcore: registered new interface driver ums-sddr09
[   31.587501] usbcore: registered new interface driver ums-sddr55
[   31.604704] usbcore: registered new interface driver ums-usbat
[   31.684388] xt_time: kernel timezone is -0000
[   31.704984] PPP generic driver version 2.4.2
[   31.712696] NET: Registered protocol family 24
[   31.741577] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
[   31.748974] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
[   31.756961] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[   31.764724] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   33.159479] zram0: detected capacity change from 0 to 63963136
[   33.178965] Adding 62460k swap on /dev/zram0.  Priority:0 extents:1 across:62460k SS
[   37.387331] 8021q: adding VLAN 0 to HW filter on device eth0
[   39.147956] NET: Unregistered protocol family 24
[   55.201719] random: nonblocking pool is initialized
[   84.417364] zram: 5292 (cat) Attribute num_writes (and others) will be removed. See zram documentation.
root at xiaomi-mini-TV:~ :) 


----------

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=385#comment1251



More information about the lede-bugs mailing list