[FS#177] ipq806x: USB3 ports fail if booted when USB3 flash drives inserted during boot time
LEDE Bugs
lede-bugs at lists.infradead.org
Mon Feb 27 04:36:52 PST 2017
The following task has a new comment added:
FS#177 - ipq806x: USB3 ports fail if booted when USB3 flash drives inserted during boot time
User who did this - Thomas Reifferscheid (reiffert)
----------
Please re-open FS#177. I'm running into the same issue on ipq806x R7500. Relevant dmesg:
[ 2.947426] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.947943] ehci-platform: EHCI generic platform driver
[ 2.957125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.959543] ohci-platform: OHCI generic platform driver
[ 3.069589] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.069659] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.074210] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
[ 3.081705] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x11000000
[ 3.091538] hub 1-0:1.0: USB hub found
[ 3.096524] hub 1-0:1.0: 1 port detected
[ 3.100606] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.104107] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.109751] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.118021] hub 2-0:1.0: USB hub found
[ 3.125427] hub 2-0:1.0: 1 port detected
[ 3.129530] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.132942] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 3.138560] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
[ 3.145828] xhci-hcd xhci-hcd.1.auto: irq 169, io mem 0x10000000
[ 3.155248] hub 3-0:1.0: USB hub found
[ 3.160769] hub 3-0:1.0: 1 port detected
[ 3.164430] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.168402] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 3.173697] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.181692] hub 4-0:1.0: USB hub found
[ 3.189606] hub 4-0:1.0: 1 port detected
[ 3.195128] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.206452] init: - preinit -
[ 3.418439] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 3.689805] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 13.438408] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[ 13.438464] xhci-hcd xhci-hcd.0.auto: Assuming host is dying, halting host.
[ 13.470724] xhci-hcd xhci-hcd.0.auto: Host not halted after 16000 microseconds.
[ 13.470765] xhci-hcd xhci-hcd.0.auto: Non-responsive xHCI host is not halting.
[ 13.476846] xhci-hcd xhci-hcd.0.auto: Completing active URBs anyway.
[ 13.484259] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[ 13.491351] usb usb1-port1: couldn't allocate usb_device
[ 13.496032] usb 2-1: USB disconnect, device number 2
----------
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=177#comment1991
More information about the lede-bugs
mailing list