[FS#542] ipq806x: unable to boot linux-4.9.10 uboot seeing Bad Magic Number

[LEDE Bugs]

The following task has a new comment added:

FS#542 - ipq806x: unable to boot linux-4.9.10 uboot seeing Bad Magic Number
User who did this - Thomas Reifferscheid (reiffert)

----------
dissent1: the bootlogs for https://github.com/dissent1/r7800/tree/bl49-2 



U-Boot 2012.07 [local,local] (Jun 20 2014 - 17:36:49)

U-boot 2012.07 dni1 V2.2 for DNI HW ID: 29764841 NOR flash 0MB NAND flash 128MB RAM 256MB 1st Radio 3x3 2nd Radio 4x4
smem ram ptable found: ver: 0 len: 5
DRAM:  235 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
 131072 bytes read: OK
cdp: get part failed for 0:HLOS
Net:   MAC1 addr:6c:b0:ce:24:7d:5
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17 inits done
MAC2 addr:6c:b0:ce:24:7d:4
eth0, eth1
Hit any key to stop autoboot:  0
(IPQ) # tftpboot lede-ipq806x-R7500-initramfs-uImage
Using eth1 device
TFTP from server 10.20.0.2; our IP address is 10.20.0.3
Filename 'lede-ipq806x-R7500-initramfs-uImage'.
Load address: 0x41000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         ######
done
Bytes transferred = 3894357 (3b6c55 hex)
(IPQ) # bootm
   Image Name:   ARM LEDE Linux-4.9.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3894293 Bytes = 3.7 MiB
   Load Address: 42208000
   Entry Point:  42208000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
mtdparts variable not set, see 'help mtdparts'
no partitions defined

defaults:
mtdids  : nand0=msm_nand
mtdparts: mtdparts=msm_nand:12M at 0x2d40000(netgear)
info: "mtdparts" not set
Using machid 0x1260 from environment

Starting kernel ...



----------

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=542#comment1937