[FS#494] NETDEV WATCHDOG: ptm0 (): transmit queue 0 timed out
LEDE Bugs
lede-bugs at lists.infradead.org
Fri Feb 17 03:40:32 PST 2017
The following task has a new comment added:
FS#494 - NETDEV WATCHDOG: ptm0 (): transmit queue 0 timed out
User who did this - Carl-Daniel Hailfinger (hailfinger)
----------
With o2 ADSL (Annex B) I'm seeing this usually within 4 minutes after boot. I don't even get an initial PPPoE connection established before everything falls over.
syslog is attached.
Output from dsl_control follows.
root at LEDE:~# /etc/init.d/dsl_control status
ATU-C Vendor ID: Broadcom 147.158
ATU-C System Vendor ID: 00,00,30,30,30,30,00,00
Chipset: Lantiq-VRX200 Unknown
Firmware Version: 5.7.4.4.0.2
API Version: 4.17.18.6
XTSE Capabilities: 0x0, 0x0, 0x0, 0x0, 0x0, 0x4, 0x0, 0x0
Annex: B
Line Mode: G.992.5 (ADSL2+)
Profile:
Line State: UP [0x801: showtime_tc_sync]
Forward Error Correction Seconds (FECS): Near: 0 / Far: 178461
Errored seconds (ES): Near: 0 / Far: 7808
Severely Errored Seconds (SES): Near: 0 / Far: 1913
Loss of Signal Seconds (LOSS): Near: 0 / Far: 8
Unavailable Seconds (UAS): Near: 48 / Far: 48
Header Error Code Errors (HEC): Near: 0 / Far: 608262
Non Pre-emtive CRC errors (CRC_P): Near: 0 / Far: 0
Pre-emtive CRC errors (CRCP_P): Near: 0 / Far: 0
Power Management Mode: L0 - Synchronized
Latency / Interleave Delay: Down: Interleave (8.0 ms) / Up: Interleave (8.0 ms)
Data Rate: Down: 10.988 Mb/s / Up: 1.150 Mb/s
Line Attenuation (LATN): Down: 20.8dB / Up: 7.8dB
Signal Attenuation (SATN): Down: 19.0dB / Up: 8.0dB
Noise Margin (SNR): Down: 9.2dB / Up: 9.4dB
Aggregate Transmit Power (ACTATP): Down: 18.6dB / Up: 12.6dB
Max. Attainable Data Rate (ATTNDR): Down: 11.104 Mb/s / Up: 1.234 Mb/s
Line Uptime Seconds: 625
Line Uptime: 10m 25s
----------
One or more files have been attached.
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=494#comment1847
More information about the lede-bugs
mailing list