[FS#453] D7800(Netgear) NO WIFI ,It seem no driver.
LEDE Bugs
lede-bugs at lists.infradead.org
Sat Feb 11 02:16:28 PST 2017
The following task has a new comment added:
FS#453 - D7800(Netgear) NO WIFI ,It seem no driver.
User who did this - Josef Krinzinger (rossini)
----------
No wifi in RC2 see dmesg output:
root at LEDE:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.47 (buildbot at builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3104-41de9a2) ) #0 SMP Tue Feb 7 08:32:47 2017
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: Netgear Nighthawk X4 D7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 57344
[ 0.000000] free_area_init_node: node 0, pgdat c070b480, node_mem_map cde39000
[ 0.000000] Normal zone: 448 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 57344 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 11 pages/cpu @cde10000 s13824 r8192 d23040 u45056
[ 0.000000] pcpu-alloc: s13824 r8192 d23040 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56896
[ 0.000000] Kernel command line: rootfstype=squashfs noinitrd
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 221568K/229376K available (4224K kernel code, 246K rwdata, 664K rodata, 220K init, 227K bss, 7808K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xce800000 - 0xff800000 ( 784 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xce000000 ( 224 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc06ce5d8 (4890 kB)
[ 0.000000] .init : 0xc06cf000 - 0xc0706000 ( 220 kB)
[ 0.000000] .data : 0xc0706000 - 0xc07439c0 ( 247 kB)
[ 0.000000] .bss : 0xc0746000 - 0xc077ef84 ( 228 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000022] Switching to timer-based delay loop, resolution 160ns
[ 0.000202] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000226] pid_max: default: 32768 minimum: 301
[ 0.000325] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000342] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000888] CPU: Testing write buffer coherency: ok
[ 0.001203] Setting up static identity map for 0x42208280 - 0x422082d8
[ 0.004107] Brought up 2 CPUs
[ 0.004121] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004132] CPU: All CPU(s) started in SVC mode.
[ 0.012961] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.013146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.013206] pinctrl core: initialized pinctrl subsystem
[ 0.014459] NET: Registered protocol family 16
[ 0.015714] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.041455] cpuidle: using governor ladder
[ 0.072465] cpuidle: using governor menu
[ 0.086516] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 0.126486] pps_core: LinuxPPS API ver. 1 registered
[ 0.126500] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.126532] PTP clock support registered
[ 0.127565] clocksource: Switched to clocksource dg_timer
[ 0.129262] NET: Registered protocol family 2
[ 0.129817] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.129848] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.129881] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.129928] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.129949] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.130114] NET: Registered protocol family 1
[ 0.130158] PCI: CLS 0 bytes, default 64
[ 0.131307] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.131368] No memory allocated for crashlog
[ 0.138261] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.138273] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.140743] io scheduler noop registered
[ 0.140759] io scheduler deadline registered (default)
[ 0.142111] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.142207] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.142278] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.142721] PCI host bridge /soc/pci at 1b500000 ranges:
[ 0.142760] IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.142782] MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.175593] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.175615] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.175635] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.175649] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.175664] pci_bus 0000:00: scanning bus
[ 0.175709] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.175804] pci 0000:00:00.0: calling 0xc021eab0
[ 0.175859] pci 0000:00:00.0: supports D1
[ 0.175874] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.175892] pci 0000:00:00.0: PME# disabled
[ 0.176122] pci_bus 0000:00: fixups for bus
[ 0.176145] PCI: bus0: Fast back to back transfers disabled
[ 0.176163] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.176296] pci_bus 0000:01: scanning bus
[ 0.176443] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.176759] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.177121] pci 0000:01:00.0: calling 0xc021eab0
[ 0.177500] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.177537] pci 0000:01:00.0: PME# disabled
[ 0.177907] pci_bus 0000:01: fixups for bus
[ 0.177981] PCI: bus1: Fast back to back transfers disabled
[ 0.177996] pci_bus 0000:01: bus scan returning with max=01
[ 0.178017] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.178036] pci_bus 0000:00: bus scan returning with max=01
[ 0.178115] pci 0000:00:00.0: fixup irq: got 133
[ 0.178130] pci 0000:00:00.0: assigning IRQ 133
[ 0.178196] pci 0000:01:00.0: fixup irq: got 133
[ 0.178209] pci 0000:01:00.0: assigning IRQ 133
[ 0.178270] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.178292] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.178396] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.178419] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.178772] aer 0000:00:00.0:pcie02: service driver aer loaded
[ 0.179087] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.179171] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.179240] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.179664] PCI host bridge /soc/pci at 1b700000 ranges:
[ 0.179696] IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.179716] MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.208871] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.208890] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.208905] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.208917] pci_bus 0001:00: scanning bus
[ 0.208956] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.209036] pci 0001:00:00.0: calling 0xc021eab0
[ 0.209081] pci 0001:00:00.0: supports D1
[ 0.209093] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.209109] pci 0001:00:00.0: PME# disabled
[ 0.209335] pci_bus 0001:00: fixups for bus
[ 0.209355] PCI: bus0: Fast back to back transfers disabled
[ 0.209372] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.209500] pci_bus 0001:01: scanning bus
[ 0.209642] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.209955] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.210315] pci 0001:01:00.0: calling 0xc021eab0
[ 0.210695] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.210732] pci 0001:01:00.0: PME# disabled
[ 0.211024] pci_bus 0001:01: fixups for bus
[ 0.211085] PCI: bus1: Fast back to back transfers disabled
[ 0.211098] pci_bus 0001:01: bus scan returning with max=01
[ 0.211117] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.211136] pci_bus 0001:00: bus scan returning with max=01
[ 0.211180] pcieport 0000:00:00.0: fixup irq: got 133
[ 0.211195] pcieport 0000:00:00.0: assigning IRQ 133
[ 0.211256] pci 0000:01:00.0: fixup irq: got 133
[ 0.211268] pci 0000:01:00.0: assigning IRQ 133
[ 0.211334] pci 0001:00:00.0: fixup irq: got 166
[ 0.211348] pci 0001:00:00.0: assigning IRQ 166
[ 0.211408] pci 0001:01:00.0: fixup irq: got 166
[ 0.211421] pci 0001:01:00.0: assigning IRQ 166
[ 0.211473] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.211496] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.211598] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.211616] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.211936] aer 0001:00:00.0:pcie02: service driver aer loaded
[ 0.214157] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.215528] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.218365] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.218478] msm_serial 16340000.serial: uartclk = 1843200
[ 0.218543] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 167, base_baud = 115200) is a MSM
[ 0.218581] msm_serial: console setup on port #0
[ 0.856310] console [ttyMSM0] enabled
[ 0.861121] msm_serial: driver initialized
[ 0.864972] BUG: Bad page state in process swapper/0 pfn:4f9de
[ 0.868480] page:cdfecbc0 count:1611161600 mapcount:0 mapping:cbe0ffff index:0x0
[ 0.874204] flags: 0xffffffff(locked|error|referenced|uptodate|dirty|lru|active|slab|owner_priv_1|arch_1|reserved|private|private_2|writeback|head|swapcache|mappedtodisk|reclaim|swapbacked|unevictable|mlocked)
[ 0.899887] page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
[ 0.900241] bad because of flags:
[ 0.906402] flags: 0x1fffff(locked|error|referenced|uptodate|dirty|lru|active|slab|owner_priv_1|arch_1|reserved|private|private_2|writeback|head|swapcache|mappedtodisk|reclaim|swapbacked|unevictable|mlocked)
[ 0.927752] Modules linked in:
[ 0.931145] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.47 #0
[ 0.931232] Hardware name: Qualcomm (Flattened Device Tree)
[ 0.936970] Function entered at [] from []
[ 0.942518] Function entered at [] from []
[ 0.948423] Function entered at [] from []
[ 0.954238] Function entered at [] from []
[ 0.960054] Function entered at [] from []
[ 0.965868] Function entered at [] from []
[ 0.971685] Function entered at [] from []
[ 0.977500] Function entered at [] from []
[ 0.983316] Function entered at [] from []
[ 0.989134] Function entered at [] from []
[ 0.994948] Function entered at [] from []
[ 1.000764] Function entered at [] from []
[ 1.006581] Function entered at [] from []
[ 1.012398] Function entered at [] from []
[ 1.018215] Function entered at [] from []
[ 1.024030] Function entered at [] from []
[ 1.029846] Function entered at [] from []
[ 1.035661] Function entered at [] from []
[ 1.041584] Disabling lock debugging due to kernel taint
[ 1.047294] BUG: Bad page state in process swapper/0 pfn:4f9e0
[ 1.052825] page:cdfecc00 count:1128350529 mapcount:0 mapping:43414346 index:0x0
[ 1.058476] flags: 0x4646454f(locked|error|referenced|uptodate|active|owner_priv_1|reserved|head|reclaim|swapbacked)
[ 1.076102] page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
[ 1.076370] bad because of flags:
[ 1.082592] flags: 0x6454f(locked|error|referenced|uptodate|active|owner_priv_1|reserved|head|reclaim|swapbacked)
[ 1.095805] Modules linked in:
[ 1.099188] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G B 4.4.47 #0
[ 1.099213] Hardware name: Qualcomm (Flattened Device Tree)
[ 1.106323] Function entered at [] from []
[ 1.111703] Function entered at [] from []
[ 1.117605] Function entered at [] from []
[ 1.123421] Function entered at [] from []
[ 1.129235] Function entered at [] from []
[ 1.135051] Function entered at [] from []
[ 1.140867] Function entered at [] from []
[ 1.146684] Function entered at [] from []
[ 1.152500] Function entered at [] from []
[ 1.158316] Function entered at [] from []
[ 1.164131] Function entered at [] from []
[ 1.169948] Function entered at [] from []
[ 1.175763] Function entered at [] from []
[ 1.181580] Function entered at [] from []
[ 1.187396] Function entered at [] from []
[ 1.193213] Function entered at [] from []
[ 1.199028] Function entered at [] from []
[ 1.204845] Function entered at [] from []
[ 1.217375] loop: module loaded
[ 1.219404] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.219517] nand: AMD/Spansion S34MS01G2
[ 1.226111] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.230120] Scanning device for bad blocks
[ 1.655097] random: nonblocking pool is initialized
[ 1.962005] 10 ofpart partitions found on MTD device qcom-nandc
[ 1.962032] Creating 10 MTD partitions on "qcom-nandc":
[ 1.966729] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.973188] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.978058] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.983249] 0x000001200000-0x000001340000 : "art"
[ 1.988014] 0x000001340000-0x000001480000 : "artbak"
[ 1.993016] 0x000001480000-0x000001680000 : "kernel"
[ 1.998126] 0x000001680000-0x000003480000 : "ubi"
[ 2.003017] 0x000003480000-0x000007900000 : "netgear"
[ 2.007761] 0x000007900000-0x000008000000 : "reserve"
[ 2.012645] 0x000001480000-0x000003480000 : "firmware"
[ 2.018916] no rootfs found after FIT image in "firmware"
[ 2.022441] libphy: Fixed MDIO Bus: probed
[ 2.027494] libphy: GPIO Bitbanged MDIO: probed
[ 2.053267] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.844131] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.844156] Ring mode enabled
[ 2.848224] DMA HW capability register supported
[ 2.851107] Enhanced/Alternate descriptors
[ 2.855880] Enabled extended descriptors
[ 2.859932] RX Checksum Offload Engine supported (type 2)
[ 2.864043] TX Checksum insertion supported
[ 2.869488] Wake-Up On Lan supported
[ 2.873849] Enable RX Mitigation via HW Watchdog Timer
[ 2.878746] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.882444] Ring mode enabled
[ 2.887649] DMA HW capability register supported
[ 2.890676] Enhanced/Alternate descriptors
[ 2.895377] Enabled extended descriptors
[ 2.899449] RX Checksum Offload Engine supported (type 2)
[ 2.903538] TX Checksum insertion supported
[ 2.908976] Wake-Up On Lan supported
[ 2.913344] Enable RX Mitigation via HW Watchdog Timer
[ 2.917544] i2c /dev entries driver
[ 2.922606] gcc-ipq806x 900000.clock-controller: tsens calibration failed
[ 2.926152] Speed bin: 0
[ 2.932445] PVS bin: 1
[ 2.935353] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.937172] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.944524] sdhci: Secure Digital Host Controller Interface driver
[ 2.951712] sdhci: Copyright(c) Pierre Ossman
[ 2.957931] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.964118] L2 @ QSB rate. Forcing new rate.
[ 2.968229] L2 @ 384000 KHz
[ 2.972406] CPU0 @ 800000 KHz
[ 2.974803] CPU1 @ QSB rate. Forcing new rate.
[ 2.978093] CPU1 @ 384000 KHz
[ 2.984065] NET: Registered protocol family 10
[ 2.986520] NET: Registered protocol family 17
[ 2.989814] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.994383] 8021q: 802.1Q VLAN Support v1.8
[ 3.007003] Registering SWP/SWPB emulation handler
[ 3.014624] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
[ 3.016296] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:1, -19
[ 3.024694] UBI: auto-attach mtd6
[ 3.032007] ubi0: attaching mtd6
[ 3.323232] ubi0: scanning is finished
[ 3.337936] ubi0: attached mtd6 (name "ubi", size 30 MiB)
[ 3.337958] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.342309] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.349151] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.355936] ubi0: good PEBs: 240, bad PEBs: 0, corrupted PEBs: 0
[ 3.362766] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.369016] ubi0: max/mean erase counter: 15/11, WL threshold: 4096, image sequence number: 1204785644
[ 3.375993] ubi0: available PEBs: 0, total reserved PEBs: 240, PEBs reserved for bad PEB handling: 20
[ 3.385428] ubi0: background thread "ubi_bgt0d" started, PID 60
[ 3.395200] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.400354] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.405851] hctosys: unable to open rtc device (rtc0)
[ 3.424460] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.424665] Freeing unused kernel memory: 220K (c06cf000 - c0706000)
[ 3.779794] init: Console is alive
[ 3.779928] init: - watchdog -
[ 4.378590] usbcore: registered new interface driver usbfs
[ 4.378679] usbcore: registered new interface driver hub
[ 4.383034] usbcore: registered new device driver usb
[ 4.392304] SCSI subsystem initialized
[ 4.395903] libata version 3.00 loaded.
[ 4.398345] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode
[ 4.398379] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 4.406367] scsi host0: ahci
[ 4.414294] ata1: DUMMY
[ 4.419058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.419695] ehci-platform: EHCI generic platform driver
[ 4.428762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.431441] ohci-platform: OHCI generic platform driver
[ 4.539374] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.539437] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.543959] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
[ 4.551465] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x11000000
[ 4.561255] hub 1-0:1.0: USB hub found
[ 4.566310] hub 1-0:1.0: 1 port detected
[ 4.570459] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.573896] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.579479] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.587737] hub 2-0:1.0: USB hub found
[ 4.595241] hub 2-0:1.0: 1 port detected
[ 4.599274] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.602734] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 4.608298] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
[ 4.615616] xhci-hcd xhci-hcd.1.auto: irq 169, io mem 0x10000000
[ 4.625394] hub 3-0:1.0: USB hub found
[ 4.630631] hub 3-0:1.0: 1 port detected
[ 4.634490] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.638211] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 4.643709] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.651431] hub 4-0:1.0: USB hub found
[ 4.659384] hub 4-0:1.0: 1 port detected
[ 4.668269] init: - preinit -
[ 4.937998] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 5.017015] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 8.293769] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 9.534699] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 145
[ 9.618556] UBIFS (ubi0:1): recovery needed
[ 9.903682] UBIFS (ubi0:1): recovery completed
[ 9.903787] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.907048] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.915018] UBIFS (ubi0:1): FS size: 23109632 bytes (22 MiB, 182 LEBs), journal size 1142784 bytes (1 MiB, 9 LEBs)
[ 9.924929] UBIFS (ubi0:1): reserved for root: 1091524 bytes (1065 KiB)
[ 9.935168] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 9CD4B866-15FB-4A82-B64E-724FF407E382, small LPT model
[ 9.947861] mount_root: overlay filesystem has not been fully initialized yet
[ 9.957932] mount_root: switching to ubifs overlay
[ 9.964069] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 10.076662] procd: - early -
[ 10.076778] procd: - watchdog -
[ 10.767901] procd: - ubus -
[ 10.831861] procd: - init -
[ 10.981899] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.985392] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[ 10.986273] Backport generated by backports.git backports-20160324-9-g0e38f5c
[ 11.007968] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.008052] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 11.008500] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 11.150224] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 11.150276] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 11.193321] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 11.193715] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 11.201324] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 11.651402] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 11.651442] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 11.661522] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[ 11.668169] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
[ 11.677154] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
[ 12.783365] ath10k_pci 0000:01:00.0: firmware crashed! (uuid 40a9dec8-dbc4-4199-8e92-7ca528d60fd7)
[ 12.783434] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 12.791243] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 12.805173] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[ 12.808799] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
[ 12.817892] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4 cal file max-sta 32 raw 0 hwcrypto 1
[ 12.827039] ath10k_pci 0000:01:00.0: firmware register dump:
[ 12.834444] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3 0x009CEE0B 0x00955B31
[ 12.840291] ath10k_pci 0000:01:00.0: [04]: 0x009CEE0B 0x00060530 0x00000011 0x00411D7C
[ 12.848012] ath10k_pci 0000:01:00.0: [08]: 0x00413A80 0x00400000 0x00406790 0x00417224
[ 12.855912] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0x00000000 0x000D2C34 0x000D2C3F
[ 12.863811] ath10k_pci 0000:01:00.0: [16]: 0x00953438 0x000D2C37 0x00000000 0x00000000
[ 12.871711] ath10k_pci 0000:01:00.0: [20]: 0x409CEE0B 0x004066BC 0x00000001 0x00403428
[ 12.879610] ath10k_pci 0000:01:00.0: [24]: 0x809811A4 0x0040671C 0x00000036 0xC09CEE0B
[ 12.887508] ath10k_pci 0000:01:00.0: [28]: 0x800D8767 0x0040678C 0x00000004 0x004119F0
[ 12.895409] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004067BC 0x00411880 0x00400000
[ 12.903307] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x004067EC 0x00411890 0x009C3254
[ 12.911207] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x0040683C 0x00400000 0x00400600
[ 12.919105] ath10k_pci 0000:01:00.0: [44]: 0x809407AD 0x0040686C 0xD8400100 0x0040687C
[ 12.927005] ath10k_pci 0000:01:00.0: [48]: 0x8094087E 0x0040688C 0x00000000 0x00000008
[ 12.934905] ath10k_pci 0000:01:00.0: [52]: 0x80940DFB 0x004068AC 0x00400000 0x00400600
[ 12.942804] ath10k_pci 0000:01:00.0: [56]: 0x80940E5D 0x004068CC 0x00000000 0x00400600
[ 13.796015] ath10k_pci 0000:01:00.0: failed to receive control response completion, polling..
[ 14.806189] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
[ 14.806238] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
[ 14.875624] ath10k_pci 0000:01:00.0: could not init core (-110)
[ 14.875924] ath10k_pci 0000:01:00.0: could not probe fw (-110)
[ 14.881571] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 14.886330] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 14.886872] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.907976] ath10k_pci 0000:01:00.0: cannot restart a device that hasn't been started
[ 15.019981] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
[ 15.020024] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 15.069256] firmware ath10k!pre-cal-pci-0001:01:00.0.bin: firmware_loading_store: map pages failed
[ 15.069564] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/cal-pci-0001:01:00.0.bin failed with error -2
[ 15.077123] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 15.448468] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 15.448500] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 15.458355] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[ 15.465010] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
[ 15.474185] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
[ 16.580445] ath10k_pci 0001:01:00.0: firmware crashed! (uuid b9e6022d-2745-4175-9c23-365e89aebccd)
[ 16.580512] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 16.588323] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 16.602260] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[ 16.605877] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
[ 16.614977] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4 cal file max-sta 32 raw 0 hwcrypto 1
[ 16.624119] ath10k_pci 0001:01:00.0: firmware register dump:
[ 16.631467] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3 0x009CEE0B 0x00955B31
[ 16.637365] ath10k_pci 0001:01:00.0: [04]: 0x009CEE0B 0x00060530 0x00000011 0x00411D7C
[ 16.645098] ath10k_pci 0001:01:00.0: [08]: 0x00413A80 0x00400000 0x00406790 0x00417224
[ 16.652994] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0x00000000 0x000D2C34 0x000D2C3F
[ 16.660892] ath10k_pci 0001:01:00.0: [16]: 0x00953438 0x000D2C3C 0x00000000 0x00000000
[ 16.668792] ath10k_pci 0001:01:00.0: [20]: 0x409CEE0B 0x004066BC 0x00000001 0x00403428
[ 16.676690] ath10k_pci 0001:01:00.0: [24]: 0x809811A4 0x0040671C 0x00000036 0xC09CEE0B
[ 16.684590] ath10k_pci 0001:01:00.0: [28]: 0x800D8767 0x0040678C 0x00000004 0x004119F0
[ 16.692490] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004067BC 0x00411880 0x00400000
[ 16.700388] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x004067EC 0x00411890 0x009C3254
[ 16.708288] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x0040683C 0x00400000 0x00400600
[ 16.716187] ath10k_pci 0001:01:00.0: [44]: 0x809407AD 0x0040686C 0xD8400100 0x0040687C
[ 16.724086] ath10k_pci 0001:01:00.0: [48]: 0x8094087E 0x0040688C 0x00000000 0x00000008
[ 16.731986] ath10k_pci 0001:01:00.0: [52]: 0x80940DFB 0x004068AC 0x00400000 0x00400600
[ 16.739885] ath10k_pci 0001:01:00.0: [56]: 0x80940E5D 0x004068CC 0x00000000 0x00400600
[ 17.580869] ath10k_pci 0001:01:00.0: failed to receive control response completion, polling..
[ 18.601475] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
[ 18.601522] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
[ 18.668663] ath10k_pci 0001:01:00.0: could not init core (-110)
[ 18.669036] ath10k_pci 0001:01:00.0: could not probe fw (-110)
[ 18.678052] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.687158] nf_conntrack version 0.5.0 (3465 buckets, 13860 max)
[ 18.698092] ath10k_pci 0001:01:00.0: cannot restart a device that hasn't been started
[ 18.816959] xt_time: kernel timezone is -0000
[ 18.827138] PPP generic driver version 2.4.2
[ 18.829736] NET: Registered protocol family 24
[ 23.485030] device eth1 entered promiscuous mode
[ 23.487159] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 25.468794] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 25.468897] br-lan: port 1(eth1) entered forwarding state
[ 25.476732] br-lan: port 1(eth1) entered forwarding state
[ 25.483670] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 27.467937] br-lan: port 1(eth1) entered forwarding state
----------
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=453#comment1702
More information about the lede-bugs
mailing list