[FS#684] bug in kmod-can

[LEDE Bugs]

The following task has a new comment added:

FS#684 - bug in kmod-can
User who did this - Ken (marconi)

----------

This has nothing to do with the hardware (the problem exists on the virtual interface : vcan).

FYI, this is still a problem on Reboot (17.01.1, r3316-7eb58cf109) :



root at oo0:/# opkg install kmod-can-vcan
Installing kmod-can-vcan (4.4.61-1) to root...
Downloading http://downloads.lede-project.org/releases/17.01.1/targets/ar71xx/generic/packages/kmod-can-vcan_4.4.61-1_mips_24kc.ipk
Installing kmod-can (4.4.61-1) to root...
Downloading http://downloads.lede-project.org/releases/17.01.1/targets/ar71xx/generic/packages/kmod-can_4.4.61-1_mips_24kc.ipk
Configuring kmod-can.
[   77.257909] can: controller area network core (rev 20120528 abi 9)
[   77.262785] NET: Registered protocol family 29
[   77.279625] CAN device driver interface
can-dev is already loaded
Configuring kmod-can-vcan.
[   77.398133] vcan: Virtual CAN interface driver
Collected errors:
 * pkg_run_script: package "kmod-can" postinst script returned status 255.
 * opkg_configure: kmod-can.postinst returned 255.
root at oo0:/# ip link add dev vcan0 type vcan
root at oo0:/# ip l
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0:  mtu 1500 qdisc fq_codel state DOWN qlen 1000
    link/ether 40:a3:6b:c1:08:f9 brd ff:ff:ff:ff:ff:ff
4: wlan0:  mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 40:a3:6b:c1:08:fa brd ff:ff:ff:ff:ff:ff
5: vcan0:  mtu 16 qdisc noop state DOWN qlen 1
    link/[280] 



----------

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=684#comment2485