[FS#704] brcmfmac / Raspberry Pi 3 / wifi not working / adhoc and 80211s-mode

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - Bastian Bittorf (bittorf) 

Attached to Project - LEDE Project
Summary - brcmfmac / Raspberry Pi 3 / wifi not working / adhoc and 80211s-mode
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - tested with a snapshot-image and a selfcompiled with r3923
wifi in adhoc mode or 80211s-mode ist not working. Messages in
syslog are the same. wifi-scanning works (iw dev wlan0 scan).


root at LEDE:~ :) dmesg | grep -i brcm
[   14.341639] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[   14.387220] usbcore: registered new interface driver brcmfmac

root at LEDE:~ wifi
root at LEDE:~ logread
Sun Apr  9 04:04:02 2017 daemon.notice netifd: Interface 'wlan' is now down
Sun Apr  9 04:04:02 2017 daemon.notice netifd: Interface 'wlan' is disabled
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5094): command failed: No error information (-524)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: No error information (-524)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: Not supported (-95)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: I/O error (-5)
Sun Apr  9 04:04:03 2017 daemon.notice netifd: radio0 (5131): command failed: Too many open files in system (-23)
Sun Apr  9 04:04:04 2017 daemon.notice netifd: radio0 (5131): command failed: Too many open files in system (-23)
Sun Apr  9 04:04:04 2017 daemon.notice netifd: radio0 (5131): Device setup failed: INTERFACE_CREATION_FAILED
Sun Apr  9 04:04:04 2017 daemon.notice netifd: radio0 (5131): WARNING: Variable 'interfaces' does not exist or is not an array/object

root at LEDE:~ uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.country='US'
wireless.radio0.channel='5'
wireless.radio0.path='platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio0.hwmode='11g'
wireless. at wifi-iface[0]=wifi-iface
wireless. at wifi-iface[0].device='radio0'
wireless. at wifi-iface[0].network='wlan'
wireless. at wifi-iface[0].mode='adhoc'
wireless. at wifi-iface[0].bssid='02:ca:ff:ee:ba:be'
wireless. at wifi-iface[0].macaddr='b8:27:eb:14:63:ea'
wireless. at wifi-iface[0].ssid='ffintern.2GHz'

root at LEDE:~ :) ip address show dev wlan0
3: wlan0:  mtu 1500 qdisc prio state DOWN group default qlen 1000
    link/ether b8:27:eb:14:63:ea brd ff:ff:ff:ff:ff:ff
    inet 10.63.5.1/8 brd 10.255.255.255 scope global wlan0
       valid_lft forever preferred_lft forever


More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=704