[FS#691] 5Ghz radio detected as 2.4Ghz and not-functional on Asus RP-N53 and Buffalo WHR-600D (Ralink RT5592)

[LEDE Bugs]

The following task has a new comment added:

FS#691 - 5Ghz radio detected as 2.4Ghz and not-functional on Asus RP-N53 and Buffalo WHR-600D (Ralink RT5592)
User who did this - Mathias Kresin (mkresin)

----------
According to my google skills the errors:


[   51.934086] ieee80211 phy0: rt2x00lib_rxdone_read_signal: Warning - Frame received with unrecognized signal, mode=0x0000, signal=0x0000, type=4
[   60.094043] ieee80211 phy0: rt2x00lib_rxdone_read_signal: Warning - Frame received with unrecognized signal, mode=0x0000, signal=0x0065, type=4
[   60.128242] ieee80211 phy0: rt2x00lib_rxdone: Error - Wrong frame size 0 max 3840


seams to be a known issue. But it could be as well that 0x8000 isn't the correct offset for caldata/eeprom. Would you please paste the mac address of the PCIe wireless adapter (a dump of the factory partition would be fine as well). It is a good indicator whether the correct offset was used.

Might be a silly question but have you confirmed that you are on 5GHz? According to the iw output the EEPROM of the PCIe wireless has the 2.4 and 5GHz band enabled. I've pushed another fix to my staging tree which disables the 2.4 GHz band for the PCIe wireless. The RP-N53 image is updated as well.

> I don't have the WHR-600D available.

Can you give me a rough estimate how long it takes till you are able to test the WHR-600D fix?
----------

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=691#comment2386