[FS#667] ZBT 826 / ZBT 3526 - also available with 32MB fash - possible to add this devices, too ?

LEDE Bugs lede-bugs at lists.infradead.org
Sun Apr 9 12:26:38 PDT 2017


The following task has a new comment added:

FS#667 - ZBT 826 / ZBT 3526 - also available with 32MB fash - possible to add this devices, too ?
User who did this - camel (camel)

----------
interims report 2:
hardware: ZBT3526-32MB flash

tested now also a reboot cmd: => is working with that image :)

seems to be OK (with image: Digineo AC1200 Pro image)

(exclusive the 32MB flash)

root at router_WE286:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 2.3M      2.3M         0 100% /rom
tmpfs                   251.1M    664.0K    250.4M   0% /tmp
/dev/mtdblock6           12.1M      9.0M      3.0M  75% /overlay
overlayfs:/overlay       12.1M      9.0M      3.0M  75% /
tmpfs                   512.0K         0    512.0K   0% /dev
root at router_WE286:~#


boot log:

root at router_WE286:~# dmesg | grep -v Drop
[    0.000000] Linux version 4.4.59 (buildbot at builds) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3925-64175ff) ) #0 SMP Sat Apr 8 12:30:00 2017
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Digineo AC1200 Pro
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 1c000000 @ 00000000 (usable)
[    0.000000]  memory: 04000000 @ 20000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  [mem 0x0000000010000000-0x0000000023ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x0000000023ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000023ffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat 804890e0, node_mem_map 81000000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] PERCPU: Embedded 10 pages/cpu @8148e000 s8400 r8192 d24368 u40960
[    0.000000] pcpu-alloc: s8400 r8192 d24368 u40960 alloc=10*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130560
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=00033828
[    0.000000] Readback ErrCtl register=00033828
[    0.000000] Memory: 513964K/524288K available (3713K kernel code, 203K rwdata, 856K rodata, 208K init, 256K bss, 10324K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
[    0.060000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.080000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.080000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.170000] Synchronize counters for CPU 1: done.
[    0.170000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.170000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.170000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.170000] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.250000] Synchronize counters for CPU 2: done.
[    0.250000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.250000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.250000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.250000] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.330000] Synchronize counters for CPU 3: done.
[    0.330000] Brought up 4 CPUs
[    0.340000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.350000] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.350000] pinctrl core: initialized pinctrl subsystem
[    0.360000] NET: Registered protocol family 16
[    0.360000] rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
[    0.370000] FPU Affinity set after 11720 emulations
[    0.400000] pull PCIe RST: RALINK_RSTCTRL = 0
[    0.700000] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.700000] ***** Xtal 40MHz *****
[    0.710000] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.710000] Port 0 N_FTS = 1b105000
[    0.710000] Port 1 N_FTS = 1b105000
[    0.720000] Port 2 N_FTS = 1b105000
[    1.870000]  -> 21007f2
[    1.870000] PCIE0 enabled
[    1.870000] PCIE1 enabled
[    1.880000] PCIE2 enabled
[    1.880000] PCI host bridge /pcie at 1e140000 ranges:
[    1.880000]  MEM 0x0000000060000000..0x000000006fffffff
[    1.890000]   IO 0x000000001e160000..0x000000001e16ffff
[    1.890000] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.940000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.940000] i2c-mt7621 1e000900.i2c: clock 100KHz, re-start not support
[    1.950000] PCI host bridge to bus 0000:00
[    1.960000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.960000] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    1.970000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    1.980000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.980000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.980000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.980000] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff]
[    1.980000] pci 0000:00:00.0: supports D1
[    1.980000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.980000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.980000] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.980000] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff]
[    1.980000] pci 0000:00:01.0: supports D1
[    1.980000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.980000] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
[    1.980000] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.980000] pci 0000:00:02.0: reg 0x14: [mem 0x60520000-0x6052ffff]
[    1.980000] pci 0000:00:02.0: supports D1
[    1.980000] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
[    1.980000] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[    1.980000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    1.980000] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.980000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.990000] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[    1.990000] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    1.990000] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.990000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.990000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.990000] pci 0000:03:00.0: [1b21:0611] type 00 class 0x010185
[    1.990000] pci 0000:03:00.0: reg 0x10: [io  0x0000-0x0007]
[    1.990000] pci 0000:03:00.0: reg 0x14: [io  0x0000-0x0003]
[    1.990000] pci 0000:03:00.0: reg 0x18: [io  0x0000-0x0007]
[    1.990000] pci 0000:03:00.0: reg 0x1c: [io  0x0000-0x0003]
[    1.990000] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x000f]
[    1.990000] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[    1.990000] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.990000] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[    1.990000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[    1.990000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.990000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.000000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.010000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.010000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
[    2.020000] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.030000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.030000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    2.040000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
[    2.050000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60300000-0x603fffff]
[    2.050000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60400000-0x604fffff pref]
[    2.060000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff]
[    2.070000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff]
[    2.070000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60520000-0x6052ffff]
[    2.080000] pci 0000:00:02.0: BAR 7: no space for [io  size 0x1000]
[    2.090000] pci 0000:00:02.0: BAR 7: failed to assign [io  size 0x1000]
[    2.090000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[    2.100000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.110000] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.110000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    2.120000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
[    2.130000] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.130000] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.140000] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
[    2.150000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60400000-0x6040ffff pref]
[    2.150000] pci 0000:03:00.0: BAR 5: assigned [mem 0x60300000-0x603001ff]
[    2.160000] pci 0000:03:00.0: BAR 4: no space for [io  size 0x0010]
[    2.170000] pci 0000:03:00.0: BAR 4: failed to assign [io  size 0x0010]
[    2.170000] pci 0000:03:00.0: BAR 0: no space for [io  size 0x0008]
[    2.180000] pci 0000:03:00.0: BAR 0: failed to assign [io  size 0x0008]
[    2.190000] pci 0000:03:00.0: BAR 2: no space for [io  size 0x0008]
[    2.190000] pci 0000:03:00.0: BAR 2: failed to assign [io  size 0x0008]
[    2.200000] pci 0000:03:00.0: BAR 1: no space for [io  size 0x0004]
[    2.200000] pci 0000:03:00.0: BAR 1: failed to assign [io  size 0x0004]
[    2.210000] pci 0000:03:00.0: BAR 3: no space for [io  size 0x0004]
[    2.220000] pci 0000:03:00.0: BAR 3: failed to assign [io  size 0x0004]
[    2.220000] pci 0000:00:02.0: PCI bridge to [bus 03]
[    2.230000] pci 0000:00:02.0:   bridge window [mem 0x60300000-0x603fffff]
[    2.240000] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff pref]
[    2.240000] BAR0 at slot 0 = 0
[    2.250000] bus=0x0, slot = 0x0
[    2.250000] BAR0 at slot 1 = 0
[    2.250000] bus=0x0, slot = 0x1
[    2.250000] BAR0 at slot 2 = 0
[    2.260000] bus=0x0, slot = 0x2
[    2.260000] bus=0x1, slot = 0x0, irq=0xff
[    2.260000] bus=0x2, slot = 0x1, irq=0xff
[    2.270000] bus=0x3, slot = 0x2, irq=0x0
[    2.270000] clocksource: Switched to clocksource GIC
[    2.280000] NET: Registered protocol family 2
[    2.280000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    2.280000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.290000] TCP: Hash tables configured (established 2048 bind 2048)
[    2.300000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.300000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.310000] NET: Registered protocol family 1
[    2.310000] PCI: CLS 80 bytes, default 32
[    2.310000] Crashlog allocated RAM at address 0x3f00000
[    2.330000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.330000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.350000] bounce: pool size: 64 pages
[    2.350000] io scheduler noop registered
[    2.350000] io scheduler deadline registered (default)
[    2.360000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    2.370000] console [ttyS0] disabled
[    2.370000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33, base_baud = 3125000) is a 16550A
[    2.380000] console [ttyS0] enabled
[    2.390000] bootconsole [early0] disabled
[    2.400000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    2.400000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
[    2.410000] m25p80 spi32766.0: using chunked io (size=32)
[    2.420000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
[    2.420000] 4 ofpart partitions found on MTD device spi32766.0
[    2.430000] Creating 4 MTD partitions on "spi32766.0":
[    2.430000] 0x000000000000-0x000000030000 : "u-boot"
[    2.440000] 0x000000030000-0x000000040000 : "u-boot-env"
[    2.440000] 0x000000040000-0x000000050000 : "factory"
[    2.450000] 0x000000050000-0x000002000000 : "firmware"
[    2.460000] mtd: partition "firmware" extends beyond the end of device "spi32766.0" -- size truncated to 0xfb0000
[    2.490000] 2 uimage-fw partitions found on MTD device firmware
[    2.500000] 0x000000050000-0x0000001d07bb : "kernel"
[    2.500000] 0x0000001d07bb-0x000001000000 : "rootfs"
[    2.510000] mtd: device 5 (rootfs) set to be root filesystem
[    2.520000] 1 squashfs-split partitions found on MTD device rootfs
[    2.520000] 0x0000003f0000-0x000001000000 : "rootfs_data"
[    2.530000] netif_napi_add() called with weight 128 on device eth%d
[    2.550000] libphy: mdio: probed
[    3.950000] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    3.960000] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 10
[    3.970000] mt7621_wdt 1e000100.wdt: Initialized
[    3.970000] NET: Registered protocol family 10
[    3.980000] NET: Registered protocol family 17
[    3.980000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    4.000000] 8021q: 802.1Q VLAN Support v1.8
[    4.000000] hctosys: unable to open rtc device (rtc0)
[    4.020000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    4.020000] Freeing unused kernel memory: 208K (804ac000 - 804e0000)
[    4.130000] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[    4.180000] random: nonblocking pool is initialized
[    4.800000] init: Console is alive
[    4.810000] init: - watchdog -
[    5.680000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.740000] usbcore: registered new interface driver usbfs
[    5.750000] usbcore: registered new interface driver hub
[    5.750000] usbcore: registered new device driver usb
[    5.760000] SCSI subsystem initialized
[    5.780000] libata version 3.00 loaded.
[    5.780000] ahci 0000:03:00.0: version 3.0
[    5.780000] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[    5.790000] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[    5.800000] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[    5.810000] scsi host0: ahci
[    5.810000] scsi host1: ahci
[    5.810000] ata1: SATA max UDMA/133 abar m512 at 0x60300000 port 0x60300100 irq 32
[    5.820000] ata2: SATA max UDMA/133 abar m512 at 0x60300000 port 0x60300180 irq 32
[    6.110000] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[    6.170000] ata1: SATA link down (SStatus 0 SControl 300)
[    6.520000] ata2: SATA link down (SStatus 0 SControl 300)
[    6.530000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.530000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    6.540000] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[    6.550000] xhci-mtk 1e1c0000.xhci: irq 29, io mem 0x1e1c0000
[    6.560000] hub 1-0:1.0: USB hub found
[    6.560000] hub 1-0:1.0: 2 ports detected
[    6.570000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.570000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    6.580000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.590000] hub 2-0:1.0: USB hub found
[    6.590000] hub 2-0:1.0: 1 port detected
[    6.600000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.610000] init: - preinit -
[    7.020000] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[    9.430000] jffs2: notice: (446) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    9.450000] mount_root: switching to jffs2 overlay
[    9.480000] urandom-seed: Seeding with /etc/urandom.seed
[    9.580000] procd: - early -
[    9.580000] procd: - watchdog -
[   10.240000] procd: - ubus -
[   10.400000] procd: - init -
[   11.510000] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.840000] SGI XFS with security attributes, no debug enabled
[   11.860000] gre: GRE over IPv4 demultiplexor driver
[   11.870000] ip_gre: GRE over IPv4 tunneling driver
[   11.880000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.890000] Netfilter messages via NETLINK v0.30.
[   11.910000] ip_set: protocol 6
[   12.030000] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   12.040000] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   12.090000] mt7603e 0000:01:00.0: ASIC revision: 76030010
[   14.190000] mt7603e 0000:01:00.0: Firmware Version: _mt7603mp
[   14.200000] mt7603e 0000:01:00.0: Build Time: 20151020155902
[   14.230000] firmware init done
[   14.410000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.420000] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[   14.440000] mt76x2e 0000:02:00.0: ROM patch already applied
[   14.440000] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[   14.450000] mt76x2e 0000:02:00.0: Build: 1
[   14.450000] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[   14.480000] mt76x2e 0000:02:00.0: Firmware running!
[   14.480000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   14.510000] u32 classifier
[   14.510000]     input device check on
[   14.520000]     Actions configured
[   14.520000] Mirror/redirect action on
[   14.530000] nf_conntrack version 0.5.0 (8033 buckets, 32132 max)
[   14.610000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.760000] usb-storage 1-1:1.0: USB Mass Storage device detected
[   14.770000] scsi host2: usb-storage 1-1:1.0
[   14.770000] usbcore: registered new interface driver usb-storage
[   14.790000] usbcore: registered new interface driver usbserial
[   14.800000] usbcore: registered new interface driver usbserial_generic
[   14.810000] usbserial: USB Serial support registered for generic
[   14.840000] xt_time: kernel timezone is -0000
[   14.860000] PPP generic driver version 2.4.2
[   14.860000] PPP MPPE Compression module registered
[   14.870000] NET: Registered protocol family 24
[   14.880000] PPTP driver version 0.8.5
[   14.890000] usbcore: registered new interface driver option
[   14.890000] usbserial: USB Serial support registered for GSM modem (1-port)
[   14.900000] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.770000] scsi 2:0:0:0: Direct-Access     Generic  Mass-Storage     1.11 PQ: 0 ANSI: 2
[   16.690000] sd 2:0:0:0: [sda] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[   16.710000] sd 2:0:0:0: [sda] Write Protect is off
[   16.710000] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[   16.720000] sd 2:0:0:0: [sda] No Caching mode page found
[   16.720000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   16.730000]  sda: sda1
[   16.740000] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   22.060000] device eth0.1 entered promiscuous mode
[   22.070000] device eth0 entered promiscuous mode
[   22.080000] br-lan: port 1(eth0.1) entered forwarding state
[   22.090000] br-lan: port 1(eth0.1) entered forwarding state
[   22.130000] IPv6: ADDRCONF(NETDEV_UP): br-lan_guest: link is not ready
[   22.860000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   23.880000] pptp-VPN_PPTP: renamed from ppp0
[   24.090000] br-lan: port 1(eth0.1) entered forwarding state
[   26.130000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   27.480000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.480000] device wlan1 entered promiscuous mode
[   27.490000] device wlan0 entered promiscuous mode
[   27.490000] br-lan: port 3(wlan0) entered forwarding state
[   27.490000] br-lan: port 3(wlan0) entered forwarding state
[   27.520000] br-lan: port 3(wlan0) entered disabled state
[   28.910000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   28.910000] br-lan: port 2(wlan1) entered forwarding state
[   28.920000] br-lan: port 2(wlan1) entered forwarding state
[   28.940000] device wlan1-1 entered promiscuous mode
[   28.940000] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[   28.950000] br-lan_guest: port 1(wlan1-1) entered forwarding state
[   28.960000] br-lan_guest: port 1(wlan1-1) entered forwarding state
[   28.960000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan_guest: link becomes ready
[   29.650000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[   29.710000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   29.710000] br-lan: port 3(wlan0) entered forwarding state
[   29.720000] br-lan: port 3(wlan0) entered forwarding state
[   29.740000] device wlan0-1 entered promiscuous mode
[   29.740000] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[   29.750000] br-lan_guest: port 2(wlan0-1) entered forwarding state
[   29.760000] br-lan_guest: port 2(wlan0-1) entered forwarding state
[   29.910000] br-lan_guest: port 2(wlan0-1) entered disabled state
[   30.390000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[   30.400000] br-lan_guest: port 2(wlan0-1) entered forwarding state
[   30.400000] br-lan_guest: port 2(wlan0-1) entered forwarding state
[   30.920000] br-lan: port 2(wlan1) entered forwarding state
[   30.960000] br-lan_guest: port 1(wlan1-1) entered forwarding state
[   31.720000] br-lan: port 3(wlan0) entered forwarding state
[   32.400000] br-lan_guest: port 2(wlan0-1) entered forwarding state
[   36.890000] pptp-VPN_PPTP: renamed from ppp0


----------

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=667#comment2362



More information about the lede-bugs mailing list