[FS#157] Mikrotik RB493G: Reboot loop

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - Github Issues (github-import) 

Attached to Project - LEDE Project
Summary - Mikrotik RB493G: Reboot loop
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Github issue #74 reported by: https://github.com/renne

Hi,

I've installed today's LEDE-snapshot on a Mikrotik RB493G with wget2nand (lede-ar71xx-mikrotik-vmlinux-lzma.elf AND lede-ar71xx-mikrotik-defaultnowifi-rootfs.tar.gz).

After the console message

>[ 3.016759] io scheduler noop registered
[ 3.020684] io scheduler deadline registered (default)
[ 3.026081] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 3.035001] console [ttyS0] disabled
[ 3.058651] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A

the RB493G just reboots.

OpenWRT 15.05.1 works fine.

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=157