[FS#106] TPLink CPE510 - eth0 (ag71xx): transmit queue 0 timed out & eth0: tx timeout
LEDE Bugs
lede-bugs at lists.infradead.org
Sun Aug 21 14:03:13 PDT 2016
The following task has a new comment added:
FS#106 - TPLink CPE510 - eth0 (ag71xx): transmit queue 0 timed out & eth0: tx timeout
User who did this - Bluse-Blue (Bluse)
----------
Hi all,
Some more troubleshooting infos I just gathers from observing the issue:
- when connecting the Ethernet cable after the reboot process has finished, dmesg on the CPE510 shows eth0: link up (1000Mbps/Full duplex), but the NIC is 100MBit and not 1000MBit. My Laptop show 100MBit when Ethernet connection is establied
- when connecting the Ethernet cable after the reboot process has finished, ethool seem to have problem to get the Ethnernet device settings:
root at new-evernetlter / # ifconfig
eth0 Link encap:Ethernet HWaddr F4:F2:6D:FF:E6:C2
inet6 addr: fe80::f6f2:6dff:feff:e6c2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:24482 errors:0 dropped:0 overruns:0 frame:0
TX packets:44657 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1967103 (1.8 MiB) TX bytes:63737318 (60.7 MiB)
Interrupt:5
eth0.1 Link encap:Ethernet HWaddr F4:F2:6D:FF:E6:C2
inet addr:10.10.200.1 Bcast:10.10.200.255 Mask:255.255.255.0
inet6 addr: fe80::f6f2:6dff:feff:e6c2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:24482 errors:0 dropped:0 overruns:0 frame:0
TX packets:44285 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1526427 (1.4 MiB) TX bytes:63434726 (60.4 MiB)
eth0.7 Link encap:Ethernet HWaddr F4:F2:6D:FF:E6:C2
inet6 addr: fe80::f6f2:6dff:feff:e6c2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:365 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:123174 (120.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:9120 (8.9 KiB) TX bytes:9120 (8.9 KiB)
root at new-evernetlter / # ethtool eth0
Settings for eth0:
Cannot get device settings: No such device
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes
root at new-evernetlter / # ethtool eth0.1
Settings for eth0.1:
Cannot get device settings: No such device
Link detected: yes
root at new-evernetlter / # ethtool eth0.7
Settings for eth0.7:
Cannot get device settings: No such device
Link detected: yes
Greetings Thomas
----------
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=106#comment273
More information about the lede-bugs
mailing list