[PATCH v4 3/4] RISC-V: KVM: add KVM_CAP_RISCV_SET_HGATP_MODE

[fangyu.yu at linux.alibaba.com]

From: Fangyu Yu <fangyu.yu at linux.alibaba.com>

Add a VM capability that allows userspace to select the G-stage page table
format by setting HGATP.MODE on a per-VM basis.

Userspace enables the capability via KVM_ENABLE_CAP, passing the requested
HGATP.MODE in args[0]. The request is rejected with -EINVAL if the mode is
not supported by the host, and with -EBUSY if the VM has already been
committed (e.g. vCPUs have been created or any memslot is populated).

KVM_CHECK_EXTENSION(KVM_CAP_RISCV_SET_HGATP_MODE) returns a bitmask of the
HGATP.MODE formats supported by the host.

Signed-off-by: Fangyu Yu <fangyu.yu at linux.alibaba.com>
---
 Documentation/virt/kvm/api.rst | 27 +++++++++++++++++++++++++++
 arch/riscv/kvm/vm.c            | 20 ++++++++++++++++++--
 include/uapi/linux/kvm.h       |  1 +
 3 files changed, 46 insertions(+), 2 deletions(-)

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 01a3abef8abb..1a0c5ddacae8 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -8765,6 +8765,33 @@ helpful if user space wants to emulate instructions which are not
 This capability can be enabled dynamically even if VCPUs were already
 created and are running.
 
+7.47 KVM_CAP_RISCV_SET_HGATP_MODE
+---------------------------------
+
+:Architectures: riscv
+:Type: VM
+:Parameters: args[0] contains the requested HGATP mode
+:Returns:
+  - 0 on success.
+  - -EINVAL if args[0] is outside the range of HGATP modes supported by the
+    hardware.
+  - -EBUSY if vCPUs have already been created for the VM, if the VM has any
+    non-empty memslots.
+
+This capability allows userspace to explicitly select the HGATP mode for
+the VM. The selected mode must be supported by both KVM and hardware. This
+capability must be enabled before creating any vCPUs or memslots.
+
+``KVM_CHECK_EXTENSION(KVM_CAP_RISCV_SET_HGATP_MODE)`` returns a bitmask of
+HGATP.MODE values supported by the host. A return value of 0 indicates that
+the capability is not supported.
+
+The returned bitmask uses the following bit positions::
+
+  bit 0: HGATP.MODE = SV39X4
+  bit 1: HGATP.MODE = SV48X4
+  bit 2: HGATP.MODE = SV57X4
+
 8. Other capabilities.
 ======================
 
diff --git a/arch/riscv/kvm/vm.c b/arch/riscv/kvm/vm.c
index 4b2156df40fc..3bbbcb6a17a6 100644
--- a/arch/riscv/kvm/vm.c
+++ b/arch/riscv/kvm/vm.c
@@ -202,6 +202,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_VM_GPA_BITS:
 		r = kvm_riscv_gstage_gpa_bits(&kvm->arch);
 		break;
+	case KVM_CAP_RISCV_SET_HGATP_MODE:
+		r = kvm_riscv_get_hgatp_mode_mask();
+		break;
 	default:
 		r = 0;
 		break;
@@ -212,12 +215,25 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 
 int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 {
+	if (cap->flags)
+		return -EINVAL;
+
 	switch (cap->cap) {
 	case KVM_CAP_RISCV_MP_STATE_RESET:
-		if (cap->flags)
-			return -EINVAL;
 		kvm->arch.mp_state_reset = true;
 		return 0;
+	case KVM_CAP_RISCV_SET_HGATP_MODE:
+#ifdef CONFIG_64BIT
+		if (!kvm_riscv_hgatp_mode_is_valid(cap->args[0]))
+			return -EINVAL;
+
+		if (kvm->created_vcpus || !kvm_are_all_memslots_empty(kvm))
+			return -EBUSY;
+
+		kvm->arch.kvm_riscv_gstage_pgd_levels =
+				3 + cap->args[0] - HGATP_MODE_SV39X4;
+#endif
+		return 0;
 	default:
 		return -EINVAL;
 	}
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index dddb781b0507..00c02a880518 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -974,6 +974,7 @@ struct kvm_enable_cap {
 #define KVM_CAP_GUEST_MEMFD_FLAGS 244
 #define KVM_CAP_ARM_SEA_TO_USER 245
 #define KVM_CAP_S390_USER_OPEREXEC 246
+#define KVM_CAP_RISCV_SET_HGATP_MODE 247
 
 struct kvm_irq_routing_irqchip {
 	__u32 irqchip;
-- 
2.50.1