[kvm-unit-tests PATCH v2 4/5] configure: Add --qemu-cpu option

[Eric Auger]

Hi Jean-Philippe,


On 3/14/25 4:49 PM, Jean-Philippe Brucker wrote:
> Add the --qemu-cpu option to let users set the CPU type to run on.
> At the moment --processor allows to set both GCC -mcpu flag and QEMU
> -cpu. On Arm we'd like to pass `-cpu max` to QEMU in order to enable all
> the TCG features by default, and it could also be nice to let users
> modify the CPU capabilities by setting extra -cpu options.
> Since GCC -mcpu doesn't accept "max" or "host", separate the compiler
> and QEMU arguments.
>
> `--processor` is now exclusively for compiler options, as indicated by
> its documentation ("processor to compile for"). So use $QEMU_CPU on
> RISC-V as well.
>
> Suggested-by: Andrew Jones <andrew.jones at linux.dev>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
> ---
>  scripts/mkstandalone.sh |  2 +-
>  arm/run                 | 17 +++++++++++------
>  riscv/run               |  8 ++++----
>  configure               |  7 +++++++
>  4 files changed, 23 insertions(+), 11 deletions(-)
>
> diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh
> index 2318a85f..6b5f725d 100755
> --- a/scripts/mkstandalone.sh
> +++ b/scripts/mkstandalone.sh
> @@ -42,7 +42,7 @@ generate_test ()
>  
>  	config_export ARCH
>  	config_export ARCH_NAME
> -	config_export PROCESSOR
> +	config_export QEMU_CPU
>  
>  	echo "echo BUILD_HEAD=$(cat build-head)"
>  
> diff --git a/arm/run b/arm/run
> index efdd44ce..561bafab 100755
> --- a/arm/run
> +++ b/arm/run
> @@ -8,7 +8,7 @@ if [ -z "$KUT_STANDALONE" ]; then
>  	source config.mak
>  	source scripts/arch-run.bash
>  fi
> -processor="$PROCESSOR"
> +qemu_cpu="$QEMU_CPU"
>  
>  if [ "$QEMU" ] && [ -z "$ACCEL" ] &&
>     [ "$HOST" = "aarch64" ] && [ "$ARCH" = "arm" ] &&
> @@ -37,12 +37,17 @@ if [ "$ACCEL" = "kvm" ]; then
>  	fi
>  fi
>  
> -if [ "$ACCEL" = "kvm" ] || [ "$ACCEL" = "hvf" ]; then
> -	if [ "$HOST" = "aarch64" ] || [ "$HOST" = "arm" ]; then
> -		processor="host"
> +if [ -z "$qemu_cpu" ]; then
> +	if ( [ "$ACCEL" = "kvm" ] || [ "$ACCEL" = "hvf" ] ) &&
> +	   ( [ "$HOST" = "aarch64" ] || [ "$HOST" = "arm" ] ); then
> +		qemu_cpu="host"
>  		if [ "$ARCH" = "arm" ] && [ "$HOST" = "aarch64" ]; then
> -			processor+=",aarch64=off"
> +			qemu_cpu+=",aarch64=off"
>  		fi
> +	elif [ "$ARCH" = "arm64" ]; then
> +		qemu_cpu="cortex-a57"
> +	else
> +		qemu_cpu="cortex-a15"
>  	fi
>  fi
>  
> @@ -71,7 +76,7 @@ if $qemu $M -device '?' | grep -q pci-testdev; then
>  fi
>  
>  A="-accel $ACCEL$ACCEL_PROPS"
> -command="$qemu -nodefaults $M $A -cpu $processor $chr_testdev $pci_testdev"
> +command="$qemu -nodefaults $M $A -cpu $qemu_cpu $chr_testdev $pci_testdev"
>  command+=" -display none -serial stdio"
>  command="$(migration_cmd) $(timeout_cmd) $command"
>  
> diff --git a/riscv/run b/riscv/run
> index e2f5a922..02fcf0c0 100755
> --- a/riscv/run
> +++ b/riscv/run
> @@ -11,12 +11,12 @@ fi
>  
>  # Allow user overrides of some config.mak variables
>  mach=$MACHINE_OVERRIDE
> -processor=$PROCESSOR_OVERRIDE
> +qemu_cpu=$QEMU_CPU_OVERRIDE
>  firmware=$FIRMWARE_OVERRIDE
>  
> -[ "$PROCESSOR" = "$ARCH" ] && PROCESSOR="max"
> +[ -z "$QEMU_CPU" ] && QEMU_CPU="max"
>  : "${mach:=virt}"
> -: "${processor:=$PROCESSOR}"
> +: "${qemu_cpu:=$QEMU_CPU}"
>  : "${firmware:=$FIRMWARE}"
>  [ "$firmware" ] && firmware="-bios $firmware"
>  
> @@ -32,7 +32,7 @@ fi
>  mach="-machine $mach"
>  
>  command="$qemu -nodefaults -nographic -serial mon:stdio"
> -command+=" $mach $acc $firmware -cpu $processor "
> +command+=" $mach $acc $firmware -cpu $qemu_cpu "
>  command="$(migration_cmd) $(timeout_cmd) $command"
>  
>  if [ "$UEFI_SHELL_RUN" = "y" ]; then
> diff --git a/configure b/configure
> index 5306bad3..d25bd23e 100755
> --- a/configure
> +++ b/configure
> @@ -52,6 +52,7 @@ page_size=
>  earlycon=
>  efi=
>  efi_direct=
> +qemu_cpu=
>  
>  # Enable -Werror by default for git repositories only (i.e. developer builds)
>  if [ -e "$srcdir"/.git ]; then
> @@ -69,6 +70,8 @@ usage() {
>  	    --arch=ARCH            architecture to compile for ($arch). ARCH can be one of:
>  	                           arm, arm64, i386, ppc64, riscv32, riscv64, s390x, x86_64
>  	    --processor=PROCESSOR  processor to compile for ($processor)
> +	    --qemu-cpu=CPU         the CPU model to run on. The default depends on
> +	                           the configuration, usually it is "host" or "max".
nit: I would remove 'usually it is "host" or "max"'. I don't see any
consistency check between qemu_cpu and processor in case it is
explicitly set? Do we care? Eric

>  	    --target=TARGET        target platform that the tests will be running on (qemu or
>  	                           kvmtool, default is qemu) (arm/arm64 only)
>  	    --cross-prefix=PREFIX  cross compiler prefix
> @@ -142,6 +145,9 @@ while [[ $optno -le $argc ]]; do
>          --processor)
>  	    processor="$arg"
>  	    ;;
> +	--qemu-cpu)
> +	    qemu_cpu="$arg"
> +	    ;;
>  	--target)
>  	    target="$arg"
>  	    ;;
> @@ -464,6 +470,7 @@ ARCH=$arch
>  ARCH_NAME=$arch_name
>  ARCH_LIBDIR=$arch_libdir
>  PROCESSOR=$processor
> +QEMU_CPU=$qemu_cpu
>  CC=$cc
>  CFLAGS=$cflags
>  LD=$cross_prefix$ld

Reviewed-by: Eric Auger <eric.auger at redhat.com>

Eric