[PATCH V2] RISC-V: KVM: Write hgatp register with valid mode bits

[Troy Mitchell]

On Mon, Aug 18, 2025 at 01:42:07PM +0800, fangyu.yu at linux.alibaba.com wrote:
> From: Fangyu Yu <fangyu.yu at linux.alibaba.com>
> 
> According to the RISC-V Privileged Architecture Spec, when MODE=Bare
> is selected,software must write zero to the remaining fields of hgatp.
> 
> We have detected the valid mode supported by the HW before, So using a
> valid mode to detect how many vmid bits are supported.
> 
> Signed-off-by: Fangyu Yu <fangyu.yu at linux.alibaba.com>
With Fixed tag, feel free to add:

Reviewed-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> 
> ---
> Changes in v2:
> - Fixed build error since kvm_riscv_gstage_mode() has been modified.
> ---
>  arch/riscv/kvm/vmid.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/riscv/kvm/vmid.c b/arch/riscv/kvm/vmid.c
> index 3b426c800480..5f33625f4070 100644
> --- a/arch/riscv/kvm/vmid.c
> +++ b/arch/riscv/kvm/vmid.c
> @@ -14,6 +14,7 @@
>  #include <linux/smp.h>
>  #include <linux/kvm_host.h>
>  #include <asm/csr.h>
> +#include <asm/kvm_mmu.h>
>  #include <asm/kvm_tlb.h>
>  #include <asm/kvm_vmid.h>
>  
> @@ -28,7 +29,7 @@ void __init kvm_riscv_gstage_vmid_detect(void)
>  
>  	/* Figure-out number of VMID bits in HW */
>  	old = csr_read(CSR_HGATP);
> -	csr_write(CSR_HGATP, old | HGATP_VMID);
> +	csr_write(CSR_HGATP, (kvm_riscv_gstage_mode << HGATP_MODE_SHIFT) | HGATP_VMID);
>  	vmid_bits = csr_read(CSR_HGATP);
>  	vmid_bits = (vmid_bits & HGATP_VMID) >> HGATP_VMID_SHIFT;
>  	vmid_bits = fls_long(vmid_bits);
> -- 
> 2.49.0
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv