[PATCH v5 16/22] KVM: riscv: selftests: Move sbi definitions to its own header file
Andrew Jones
ajones at ventanamicro.com
Fri Apr 5 05:16:29 PDT 2024
On Wed, Apr 03, 2024 at 01:04:45AM -0700, Atish Patra wrote:
> The SBI definitions will continue to grow. Move the sbi related
> definitions to its own header file from processor.h
>
> Suggested-by: Andrew Jones <ajones at ventanamicro.com>
> Signed-off-by: Atish Patra <atishp at rivosinc.com>
> ---
> .../selftests/kvm/include/riscv/processor.h | 39 ---------------
> .../testing/selftests/kvm/include/riscv/sbi.h | 50 +++++++++++++++++++
> .../selftests/kvm/include/riscv/ucall.h | 1 +
> tools/testing/selftests/kvm/steal_time.c | 4 +-
> 4 files changed, 54 insertions(+), 40 deletions(-)
> create mode 100644 tools/testing/selftests/kvm/include/riscv/sbi.h
>
> diff --git a/tools/testing/selftests/kvm/include/riscv/processor.h b/tools/testing/selftests/kvm/include/riscv/processor.h
> index ce473fe251dd..3b9cb39327ff 100644
> --- a/tools/testing/selftests/kvm/include/riscv/processor.h
> +++ b/tools/testing/selftests/kvm/include/riscv/processor.h
> @@ -154,45 +154,6 @@ void vm_install_interrupt_handler(struct kvm_vm *vm, exception_handler_fn handle
> #define PGTBL_PAGE_SIZE PGTBL_L0_BLOCK_SIZE
> #define PGTBL_PAGE_SIZE_SHIFT PGTBL_L0_BLOCK_SHIFT
>
> -/* SBI return error codes */
> -#define SBI_SUCCESS 0
> -#define SBI_ERR_FAILURE -1
> -#define SBI_ERR_NOT_SUPPORTED -2
> -#define SBI_ERR_INVALID_PARAM -3
> -#define SBI_ERR_DENIED -4
> -#define SBI_ERR_INVALID_ADDRESS -5
> -#define SBI_ERR_ALREADY_AVAILABLE -6
> -#define SBI_ERR_ALREADY_STARTED -7
> -#define SBI_ERR_ALREADY_STOPPED -8
> -
> -#define SBI_EXT_EXPERIMENTAL_START 0x08000000
> -#define SBI_EXT_EXPERIMENTAL_END 0x08FFFFFF
> -
> -#define KVM_RISCV_SELFTESTS_SBI_EXT SBI_EXT_EXPERIMENTAL_END
> -#define KVM_RISCV_SELFTESTS_SBI_UCALL 0
> -#define KVM_RISCV_SELFTESTS_SBI_UNEXP 1
> -
> -enum sbi_ext_id {
> - SBI_EXT_BASE = 0x10,
> - SBI_EXT_STA = 0x535441,
> -};
> -
> -enum sbi_ext_base_fid {
> - SBI_EXT_BASE_PROBE_EXT = 3,
> -};
> -
> -struct sbiret {
> - long error;
> - long value;
> -};
> -
> -struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
> - unsigned long arg1, unsigned long arg2,
> - unsigned long arg3, unsigned long arg4,
> - unsigned long arg5);
> -
> -bool guest_sbi_probe_extension(int extid, long *out_val);
> -
> static inline void local_irq_enable(void)
> {
> csr_set(CSR_SSTATUS, SR_SIE);
> diff --git a/tools/testing/selftests/kvm/include/riscv/sbi.h b/tools/testing/selftests/kvm/include/riscv/sbi.h
> new file mode 100644
> index 000000000000..ba04f2dec7b5
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/include/riscv/sbi.h
> @@ -0,0 +1,50 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * RISC-V SBI specific definitions
> + *
> + * Copyright (C) 2024 Rivos Inc.
> + */
> +
> +#ifndef SELFTEST_KVM_SBI_H
> +#define SELFTEST_KVM_SBI_H
> +
> +/* SBI return error codes */
> +#define SBI_SUCCESS 0
> +#define SBI_ERR_FAILURE -1
> +#define SBI_ERR_NOT_SUPPORTED -2
> +#define SBI_ERR_INVALID_PARAM -3
> +#define SBI_ERR_DENIED -4
> +#define SBI_ERR_INVALID_ADDRESS -5
> +#define SBI_ERR_ALREADY_AVAILABLE -6
> +#define SBI_ERR_ALREADY_STARTED -7
> +#define SBI_ERR_ALREADY_STOPPED -8
> +
> +#define SBI_EXT_EXPERIMENTAL_START 0x08000000
> +#define SBI_EXT_EXPERIMENTAL_END 0x08FFFFFF
> +
> +#define KVM_RISCV_SELFTESTS_SBI_EXT SBI_EXT_EXPERIMENTAL_END
> +#define KVM_RISCV_SELFTESTS_SBI_UCALL 0
> +#define KVM_RISCV_SELFTESTS_SBI_UNEXP 1
> +
> +enum sbi_ext_id {
> + SBI_EXT_BASE = 0x10,
> + SBI_EXT_STA = 0x535441,
> +};
> +
> +enum sbi_ext_base_fid {
> + SBI_EXT_BASE_PROBE_EXT = 3,
> +};
> +
> +struct sbiret {
> + long error;
> + long value;
> +};
> +
> +struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
> + unsigned long arg1, unsigned long arg2,
> + unsigned long arg3, unsigned long arg4,
> + unsigned long arg5);
> +
> +bool guest_sbi_probe_extension(int extid, long *out_val);
> +
> +#endif /* SELFTEST_KVM_SBI_H */
> diff --git a/tools/testing/selftests/kvm/include/riscv/ucall.h b/tools/testing/selftests/kvm/include/riscv/ucall.h
> index be46eb32ec27..a695ae36f3e0 100644
> --- a/tools/testing/selftests/kvm/include/riscv/ucall.h
> +++ b/tools/testing/selftests/kvm/include/riscv/ucall.h
> @@ -3,6 +3,7 @@
> #define SELFTEST_KVM_UCALL_H
>
> #include "processor.h"
> +#include "sbi.h"
>
> #define UCALL_EXIT_REASON KVM_EXIT_RISCV_SBI
>
> diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c
> index bae0c5026f82..2ff82c7fd926 100644
> --- a/tools/testing/selftests/kvm/steal_time.c
> +++ b/tools/testing/selftests/kvm/steal_time.c
> @@ -11,7 +11,9 @@
> #include <pthread.h>
> #include <linux/kernel.h>
> #include <asm/kvm.h>
> -#ifndef __riscv
> +#ifdef __riscv
> +#include "sbi.h"
> +#else
> #include <asm/kvm_para.h>
> #endif
>
> --
> 2.34.1
>
Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
More information about the kvm-riscv
mailing list