[PATCH v2 7/8] tty: Add SBI debug console support to HVC SBI driver

Anup Patel apatel at ventanamicro.com
Wed Oct 11 22:15:08 PDT 2023


From: Atish Patra <atishp at rivosinc.com>

RISC-V SBI specification supports advanced debug console
support via SBI DBCN extension.

Extend the HVC SBI driver to support it.

Signed-off-by: Atish Patra <atishp at rivosinc.com>
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
 drivers/tty/hvc/Kconfig         |  2 +-
 drivers/tty/hvc/hvc_riscv_sbi.c | 76 ++++++++++++++++++++++++++++++---
 2 files changed, 70 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 4f9264d005c0..6e05c5c7bca1 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
 
 config HVC_RISCV_SBI
 	bool "RISC-V SBI console support"
-	depends on RISCV_SBI_V01
+	depends on RISCV_SBI
 	select HVC_DRIVER
 	help
 	  This enables support for console output via RISC-V SBI calls, which
diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
index 31f53fa77e4a..da318d7f55c5 100644
--- a/drivers/tty/hvc/hvc_riscv_sbi.c
+++ b/drivers/tty/hvc/hvc_riscv_sbi.c
@@ -39,21 +39,83 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
 	return i;
 }
 
-static const struct hv_ops hvc_sbi_ops = {
+static const struct hv_ops hvc_sbi_v01_ops = {
 	.get_chars = hvc_sbi_tty_get,
 	.put_chars = hvc_sbi_tty_put,
 };
 
-static int __init hvc_sbi_init(void)
+static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
 {
-	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
+	phys_addr_t pa;
+	struct sbiret ret;
+
+	if (is_vmalloc_addr(buf))
+		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
+	else
+		pa = __pa(buf);
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				count, lower_32_bits(pa), upper_32_bits(pa),
+				0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				count, pa, 0, 0, 0, 0);
+	if (ret.error)
+		return 0;
+
+	return count;
 }
-device_initcall(hvc_sbi_init);
 
-static int __init hvc_sbi_console_init(void)
+static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
 {
-	hvc_instantiate(0, 0, &hvc_sbi_ops);
+	phys_addr_t pa;
+	struct sbiret ret;
+
+	if (is_vmalloc_addr(buf))
+		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
+	else
+		pa = __pa(buf);
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				count, lower_32_bits(pa), upper_32_bits(pa),
+				0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				count, pa, 0, 0, 0, 0);
+	if (ret.error)
+		return 0;
+
+	return ret.value;
+}
+
+static const struct hv_ops hvc_sbi_dbcn_ops = {
+	.put_chars = hvc_sbi_dbcn_tty_put,
+	.get_chars = hvc_sbi_dbcn_tty_get,
+};
+
+static int __init hvc_sbi_init(void)
+{
+	int err;
+
+	if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
+	    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 16));
+		if (err)
+			return err;
+		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
+	} else {
+		if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
+			err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 16));
+			if (err)
+				return err;
+			hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
+		} else {
+			return -ENODEV;
+		}
+	}
 
 	return 0;
 }
-console_initcall(hvc_sbi_console_init);
+device_initcall(hvc_sbi_init);
-- 
2.34.1




More information about the kvm-riscv mailing list