[PATCH v7 12/12] KVM: arm64: Use TLBI range-based intructions for unmap
Shaoqin Huang
shahuang at redhat.com
Tue Jul 25 21:06:57 PDT 2023
Hi Raghavendra,
On 7/26/23 01:23, Raghavendra Rao Ananta wrote:
> Hi Shaoqin,
>
> On Mon, Jul 24, 2023 at 7:32 PM Shaoqin Huang <shahuang at redhat.com> wrote:
>>
>>
>>
>> On 7/25/23 00:47, Raghavendra Rao Ananta wrote:
>>> On Mon, Jul 24, 2023 at 2:35 AM Shaoqin Huang <shahuang at redhat.com> wrote:
>>>>
>>>> Hi Raghavendra,
>>>>
>>>> On 7/22/23 10:22, Raghavendra Rao Ananta wrote:
>>>>> The current implementation of the stage-2 unmap walker traverses
>>>>> the given range and, as a part of break-before-make, performs
>>>>> TLB invalidations with a DSB for every PTE. A multitude of this
>>>>> combination could cause a performance bottleneck on some systems.
>>>>>
>>>>> Hence, if the system supports FEAT_TLBIRANGE, defer the TLB
>>>>> invalidations until the entire walk is finished, and then
>>>>> use range-based instructions to invalidate the TLBs in one go.
>>>>> Condition deferred TLB invalidation on the system supporting FWB,
>>>>> as the optimization is entirely pointless when the unmap walker
>>>>> needs to perform CMOs.
>>>>>
>>>>> Rename stage2_put_pte() to stage2_unmap_put_pte() as the function
>>>>> now serves the stage-2 unmap walker specifically, rather than
>>>>> acting generic.
>>>>>
>>>>> Signed-off-by: Raghavendra Rao Ananta <rananta at google.com>
>>>>> ---
>>>>> arch/arm64/kvm/hyp/pgtable.c | 67 +++++++++++++++++++++++++++++++-----
>>>>> 1 file changed, 58 insertions(+), 9 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
>>>>> index 5ef098af1736..cf88933a2ea0 100644
>>>>> --- a/arch/arm64/kvm/hyp/pgtable.c
>>>>> +++ b/arch/arm64/kvm/hyp/pgtable.c
>>>>> @@ -831,16 +831,54 @@ static void stage2_make_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t n
>>>>> smp_store_release(ctx->ptep, new);
>>>>> }
>>>>>
>>>>> -static void stage2_put_pte(const struct kvm_pgtable_visit_ctx *ctx, struct kvm_s2_mmu *mmu,
>>>>> - struct kvm_pgtable_mm_ops *mm_ops)
>>>>> +struct stage2_unmap_data {
>>>>> + struct kvm_pgtable *pgt;
>>>>> + bool defer_tlb_flush_init;
>>>>> +};
>>>>> +
>>>>> +static bool __stage2_unmap_defer_tlb_flush(struct kvm_pgtable *pgt)
>>>>> +{
>>>>> + /*
>>>>> + * If FEAT_TLBIRANGE is implemented, defer the individual
>>>>> + * TLB invalidations until the entire walk is finished, and
>>>>> + * then use the range-based TLBI instructions to do the
>>>>> + * invalidations. Condition deferred TLB invalidation on the
>>>>> + * system supporting FWB, as the optimization is entirely
>>>>> + * pointless when the unmap walker needs to perform CMOs.
>>>>> + */
>>>>> + return system_supports_tlb_range() && stage2_has_fwb(pgt);
>>>>> +}
>>>>> +
>>>>> +static bool stage2_unmap_defer_tlb_flush(struct stage2_unmap_data *unmap_data)
>>>>> +{
>>>>> + bool defer_tlb_flush = __stage2_unmap_defer_tlb_flush(unmap_data->pgt);
>>>>> +
>>>>> + /*
>>>>> + * Since __stage2_unmap_defer_tlb_flush() is based on alternative
>>>>> + * patching and the TLBIs' operations behavior depend on this,
>>>>> + * track if there's any change in the state during the unmap sequence.
>>>>> + */
>>>>> + WARN_ON(unmap_data->defer_tlb_flush_init != defer_tlb_flush);
>>>>> + return defer_tlb_flush;
>>>>> +}
>>>>> +
>>>>> +static void stage2_unmap_put_pte(const struct kvm_pgtable_visit_ctx *ctx,
>>>>> + struct kvm_s2_mmu *mmu,
>>>>> + struct kvm_pgtable_mm_ops *mm_ops)
>>>>> {
>>>>> + struct stage2_unmap_data *unmap_data = ctx->arg;
>>>>> +
>>>>> /*
>>>>> - * Clear the existing PTE, and perform break-before-make with
>>>>> - * TLB maintenance if it was valid.
>>>>> + * Clear the existing PTE, and perform break-before-make if it was
>>>>> + * valid. Depending on the system support, the TLB maintenance for
>>>>> + * the same can be deferred until the entire unmap is completed.
>>>>> */
>>>>> if (kvm_pte_valid(ctx->old)) {
>>>>> kvm_clear_pte(ctx->ptep);
>>>>> - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu, ctx->addr, ctx->level);
>>>>> +
>>>>> + if (!stage2_unmap_defer_tlb_flush(unmap_data))
>>>> Why not directly check (unmap_data->defer_tlb_flush_init) here?
>>>>
>>> (Re-sending the reply as the previous one was formatted as HTML and
>>> was blocked by many lists)
>>>
>>> No particular reason per say, but I was just going with the logic of
>>> determining if we need to defer the flush and the WARN_ON() parts
>>> separate.
>>> Any advantage if we directly check in stage2_unmap_put_pte() that I
>>> missed or is this purely for readability?
>>
>> Hi Raghavendra,
>>
>> I just wondering if before the stage2 walk, we want to defer the tlb
>> flush, but if when walk the stage2, the stage2_unmap_defer_tlb_flush()
>> trigger the WARN_ON() and return don't defer the tlb flush, it will
>> flush the ctx->addr's tlb. But before the WARN_ON() triggered, these tlb
>> will not be flushed, since when walk stage2 done in the
>> kvm_pgtable_stage2_unmap(), the stage2_unmap_defer_tlb_flush() still
>> trigger the WARN_ON() and don't use the tlb range-based flush. Thus some
>> of the tlb are not flushed.
>>
> Excellent point!
>> If we directly check the (unmap_data->defer_tlb_flush_init), this isn't
>> change during walking the stage2, so the WARN_ON() should only trigger
>> in kvm_pgtable_stage2_unmap()->stage2_unmap_defer_tlb_flush().
>>
>> I'm not sure if it's right since I just think once we set up use the
>> TLBI range-based flush, the result of the
>> __stage2_unmap_defer_tlb_flush() shouldn't change. Otherwise there must
>> have some stale TLB entry.
>>
> One solution that I can think of is, if the code triggers the
> WARN_ON(), we flush the entire VM's TLB using
> kvm_call_hyp(__kvm_tlb_flush_vmid) after the entire walk is finished.
> In this special/rare situation, it'll be a little expensive, but we
> will at least be correct, leaving no stale TLBs behind. WDYT?
>
I think it will be good to have this handling.
Thanks,
Shaoqin
> Thank you.
> Raghavendra
>> Thanks,
>> Shaoqin
>>
>>>
>>>>> + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
>>>>> + ctx->addr, ctx->level);
>>>> Small indent hint. The ctx->addr can align with __kvm_tlb_flush_vmid_ipa.
>>>>
>>> Ah, yes. I'll adjust this if I send out a v8.
>>>
>>> Thank you.
>>> Raghavendra
>>>> Thanks,
>>>> Shaoqin
>>>>> }
>>>>>
>>>>> mm_ops->put_page(ctx->ptep);
>>>>> @@ -1070,7 +1108,8 @@ int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
>>>>> static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
>>>>> enum kvm_pgtable_walk_flags visit)
>>>>> {
>>>>> - struct kvm_pgtable *pgt = ctx->arg;
>>>>> + struct stage2_unmap_data *unmap_data = ctx->arg;
>>>>> + struct kvm_pgtable *pgt = unmap_data->pgt;
>>>>> struct kvm_s2_mmu *mmu = pgt->mmu;
>>>>> struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
>>>>> kvm_pte_t *childp = NULL;
>>>>> @@ -1098,7 +1137,7 @@ static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
>>>>> * block entry and rely on the remaining portions being faulted
>>>>> * back lazily.
>>>>> */
>>>>> - stage2_put_pte(ctx, mmu, mm_ops);
>>>>> + stage2_unmap_put_pte(ctx, mmu, mm_ops);
>>>>>
>>>>> if (need_flush && mm_ops->dcache_clean_inval_poc)
>>>>> mm_ops->dcache_clean_inval_poc(kvm_pte_follow(ctx->old, mm_ops),
>>>>> @@ -1112,13 +1151,23 @@ static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
>>>>>
>>>>> int kvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
>>>>> {
>>>>> + int ret;
>>>>> + struct stage2_unmap_data unmap_data = {
>>>>> + .pgt = pgt,
>>>>> + .defer_tlb_flush_init = __stage2_unmap_defer_tlb_flush(pgt),
>>>>> + };
>>>>> struct kvm_pgtable_walker walker = {
>>>>> .cb = stage2_unmap_walker,
>>>>> - .arg = pgt,
>>>>> + .arg = &unmap_data,
>>>>> .flags = KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
>>>>> };
>>>>>
>>>>> - return kvm_pgtable_walk(pgt, addr, size, &walker);
>>>>> + ret = kvm_pgtable_walk(pgt, addr, size, &walker);
>>>>> + if (stage2_unmap_defer_tlb_flush(&unmap_data))
>>>>> + /* Perform the deferred TLB invalidations */
>>>>> + kvm_tlb_flush_vmid_range(pgt->mmu, addr, size);
>>>>> +
>>>>> + return ret;
>>>>> }
>>>>>
>>>>> struct stage2_attr_data {
>>>>
>>>> --
>>>> Shaoqin
>>>>
>>>
>>
>> --
>> Shaoqin
>>
>
--
Shaoqin
More information about the kvm-riscv
mailing list