[v2 03/10] drivers/perf: riscv: Read upper bits of a firmware counter
Anup Patel
anup at brainfault.org
Fri Dec 29 23:55:59 PST 2023
On Sat, Dec 30, 2023 at 3:20 AM Atish Patra <atishp at rivosinc.com> wrote:
>
> SBI v2.0 introduced a explicit function to read the upper 32 bits
> for any firmwar counter width that is longer than 32bits.
> This is only applicable for RV32 where firmware counter can be
> 64 bit.
>
> Acked-by: Palmer Dabbelt <palmer at rivosinc.com>
> Signed-off-by: Atish Patra <atishp at rivosinc.com>
LGTM.
Reviewed-by: Anup Patel <anup at brainfault.org>
Regards,
Anup
> ---
> drivers/perf/riscv_pmu_sbi.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index 16acd4dcdb96..646604f8c0a5 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -35,6 +35,8 @@
> PMU_FORMAT_ATTR(event, "config:0-47");
> PMU_FORMAT_ATTR(firmware, "config:63");
>
> +static bool sbi_v2_available;
> +
> static struct attribute *riscv_arch_formats_attr[] = {
> &format_attr_event.attr,
> &format_attr_firmware.attr,
> @@ -488,16 +490,23 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
> struct hw_perf_event *hwc = &event->hw;
> int idx = hwc->idx;
> struct sbiret ret;
> - union sbi_pmu_ctr_info info;
> u64 val = 0;
> + union sbi_pmu_ctr_info info = pmu_ctr_list[idx];
>
> if (pmu_sbi_is_fw_event(event)) {
> ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
> hwc->idx, 0, 0, 0, 0, 0);
> - if (!ret.error)
> - val = ret.value;
> + if (ret.error)
> + return val;
> +
> + val = ret.value;
> + if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) {
> + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI,
> + hwc->idx, 0, 0, 0, 0, 0);
> + if (!ret.error)
> + val |= ((u64)ret.value << 32);
> + }
> } else {
> - info = pmu_ctr_list[idx];
> val = riscv_pmu_ctr_read_csr(info.csr);
> if (IS_ENABLED(CONFIG_32BIT))
> val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
> @@ -1108,6 +1117,9 @@ static int __init pmu_sbi_devinit(void)
> return 0;
> }
>
> + if (sbi_spec_version >= sbi_mk_version(2, 0))
> + sbi_v2_available = true;
> +
> ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
> "perf/riscv/pmu:starting",
> pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
> --
> 2.34.1
>
More information about the kvm-riscv
mailing list