[PATCH v2 00/50] KVM: Rework kvm_init() and hardware enabling
Sean Christopherson
seanjc at google.com
Wed Nov 30 15:08:44 PST 2022
The main theme of this series is to kill off kvm_arch_init(),
kvm_arch_hardware_(un)setup(), and kvm_arch_check_processor_compat(), which
all originated in x86 code from way back when, and needlessly complicate
both common KVM code and architecture code. E.g. many architectures don't
mark functions/data as __init/__ro_after_init purely because kvm_init()
isn't marked __init to support x86's separate vendor modules.
The idea/hope is that with those hooks gone (moved to arch code), it will
be easier for x86 (and other architectures) to modify their module init
sequences as needed without having to fight common KVM code. E.g. I'm
hoping that ARM can build on this to simplify its hardware enabling logic,
especially the pKVM side of things.
There are bug fixes throughout this series. They are more scattered than
I would usually prefer, but getting the sequencing correct was a gigantic
pain for many of the x86 fixes due to needing to fix common code in order
for the x86 fix to have any meaning. And while the bugs are often fatal,
they aren't all that interesting for most users as they either require a
malicious admin or broken hardware, i.e. aren't likely to be encountered
by the vast majority of KVM users. So unless someone _really_ wants a
particular fix isolated for backporting, I'm not planning on shuffling
patches.
v2:
- Collect reviews/acks.
- Reset eVMCS controls in VP assist page when disabling hardware. [Vitaly]
- Clean up labels in kvm_init(). [Chao]
- Fix a goof where VMX compat checks used boot_cpu_has. [Kai]
- Reorder patches and/or tweak changelogs to not require time travel. [Paolo, Kai]
- Rewrite the changelog for the patch to move ARM away from kvm_arch_init()
to call out that it fixes theoretical bugs. [Philippe]
- Document why it's safe to allow preemption and/or migration when
accessing kvm_usage_count.
v1: https://lore.kernel.org/all/20221102231911.3107438-1-seanjc@google.com
Chao Gao (3):
KVM: x86: Do compatibility checks when onlining CPU
KVM: Rename and move CPUHP_AP_KVM_STARTING to ONLINE section
KVM: Disable CPU hotplug during hardware enabling/disabling
Isaku Yamahata (3):
KVM: Drop kvm_count_lock and instead protect kvm_usage_count with
kvm_lock
KVM: Remove on_each_cpu(hardware_disable_nolock) in kvm_exit()
KVM: Make hardware_enable_failed a local variable in the "enable all"
path
Marc Zyngier (1):
KVM: arm64: Simplify the CPUHP logic
Sean Christopherson (43):
KVM: Register /dev/kvm as the _very_ last thing during initialization
KVM: Initialize IRQ FD after arch hardware setup
KVM: Allocate cpus_hardware_enabled after arch hardware setup
KVM: Teardown VFIO ops earlier in kvm_exit()
KVM: s390: Unwind kvm_arch_init() piece-by-piece() if a step fails
KVM: s390: Move hardware setup/unsetup to init/exit
KVM: x86: Do timer initialization after XCR0 configuration
KVM: x86: Move hardware setup/unsetup to init/exit
KVM: Drop arch hardware (un)setup hooks
KVM: VMX: Reset eVMCS controls in VP assist page during hardware
disabling
KVM: VMX: Don't bother disabling eVMCS static key on module exit
KVM: VMX: Move Hyper-V eVMCS initialization to helper
KVM: x86: Move guts of kvm_arch_init() to standalone helper
KVM: VMX: Do _all_ initialization before exposing /dev/kvm to
userspace
KVM: x86: Serialize vendor module initialization (hardware setup)
KVM: arm64: Free hypervisor allocations if vector slot init fails
KVM: arm64: Unregister perf callbacks if hypervisor finalization fails
KVM: arm64: Do arm/arch initialization without bouncing through
kvm_init()
KVM: arm64: Mark kvm_arm_init() and its unique descendants as __init
KVM: MIPS: Hardcode callbacks to hardware virtualization extensions
KVM: MIPS: Setup VZ emulation? directly from kvm_mips_init()
KVM: MIPS: Register die notifier prior to kvm_init()
KVM: RISC-V: Do arch init directly in riscv_kvm_init()
KVM: RISC-V: Tag init functions and data with __init, __ro_after_init
KVM: PPC: Move processor compatibility check to module init
KVM: s390: Do s390 specific init without bouncing through kvm_init()
KVM: s390: Mark __kvm_s390_init() and its descendants as __init
KVM: Drop kvm_arch_{init,exit}() hooks
KVM: VMX: Make VMCS configuration/capabilities structs read-only after
init
KVM: x86: Do CPU compatibility checks in x86 code
KVM: Drop kvm_arch_check_processor_compat() hook
KVM: x86: Use KBUILD_MODNAME to specify vendor module name
KVM: x86: Unify pr_fmt to use module name for all KVM modules
KVM: VMX: Use current CPU's info to perform "disabled by BIOS?" checks
KVM: x86: Do VMX/SVM support checks directly in vendor code
KVM: VMX: Shuffle support checks and hardware enabling code around
KVM: SVM: Check for SVM support in CPU compatibility checks
KVM: x86: Move CPU compat checks hook to kvm_x86_ops (from
kvm_x86_init_ops)
KVM: Ensure CPU is stable during low level hardware enable/disable
KVM: Use a per-CPU variable to track which CPUs have enabled
virtualization
KVM: Register syscore (suspend/resume) ops early in kvm_init()
KVM: Opt out of generic hardware enabling on s390 and PPC
KVM: Clean up error labels in kvm_init()
Documentation/virt/kvm/locking.rst | 25 +-
arch/arm64/include/asm/kvm_host.h | 15 +-
arch/arm64/include/asm/kvm_mmu.h | 4 +-
arch/arm64/kvm/Kconfig | 1 +
arch/arm64/kvm/arch_timer.c | 29 +-
arch/arm64/kvm/arm.c | 93 +++---
arch/arm64/kvm/mmu.c | 12 +-
arch/arm64/kvm/reset.c | 8 +-
arch/arm64/kvm/sys_regs.c | 6 +-
arch/arm64/kvm/vgic/vgic-init.c | 19 +-
arch/arm64/kvm/vmid.c | 6 +-
arch/mips/include/asm/kvm_host.h | 3 +-
arch/mips/kvm/Kconfig | 1 +
arch/mips/kvm/Makefile | 2 +-
arch/mips/kvm/callback.c | 14 -
arch/mips/kvm/mips.c | 34 +--
arch/mips/kvm/vz.c | 7 +-
arch/powerpc/include/asm/kvm_host.h | 3 -
arch/powerpc/include/asm/kvm_ppc.h | 1 -
arch/powerpc/kvm/book3s.c | 12 +-
arch/powerpc/kvm/e500.c | 6 +-
arch/powerpc/kvm/e500mc.c | 6 +-
arch/powerpc/kvm/powerpc.c | 20 --
arch/riscv/include/asm/kvm_host.h | 7 +-
arch/riscv/kvm/Kconfig | 1 +
arch/riscv/kvm/main.c | 23 +-
arch/riscv/kvm/mmu.c | 12 +-
arch/riscv/kvm/vmid.c | 4 +-
arch/s390/include/asm/kvm_host.h | 1 -
arch/s390/kvm/interrupt.c | 2 +-
arch/s390/kvm/kvm-s390.c | 84 +++---
arch/s390/kvm/kvm-s390.h | 2 +-
arch/s390/kvm/pci.c | 2 +-
arch/s390/kvm/pci.h | 2 +-
arch/x86/include/asm/kvm-x86-ops.h | 1 +
arch/x86/include/asm/kvm_host.h | 8 +-
arch/x86/kvm/Kconfig | 1 +
arch/x86/kvm/cpuid.c | 1 +
arch/x86/kvm/debugfs.c | 2 +
arch/x86/kvm/emulate.c | 1 +
arch/x86/kvm/hyperv.c | 1 +
arch/x86/kvm/i8254.c | 4 +-
arch/x86/kvm/i8259.c | 4 +-
arch/x86/kvm/ioapic.c | 1 +
arch/x86/kvm/irq.c | 1 +
arch/x86/kvm/irq_comm.c | 7 +-
arch/x86/kvm/kvm_onhyperv.c | 1 +
arch/x86/kvm/lapic.c | 8 +-
arch/x86/kvm/mmu/mmu.c | 6 +-
arch/x86/kvm/mmu/page_track.c | 1 +
arch/x86/kvm/mmu/spte.c | 4 +-
arch/x86/kvm/mmu/spte.h | 4 +-
arch/x86/kvm/mmu/tdp_iter.c | 1 +
arch/x86/kvm/mmu/tdp_mmu.c | 1 +
arch/x86/kvm/mtrr.c | 1 +
arch/x86/kvm/pmu.c | 1 +
arch/x86/kvm/smm.c | 1 +
arch/x86/kvm/svm/avic.c | 2 +-
arch/x86/kvm/svm/nested.c | 2 +-
arch/x86/kvm/svm/pmu.c | 2 +
arch/x86/kvm/svm/sev.c | 1 +
arch/x86/kvm/svm/svm.c | 89 +++---
arch/x86/kvm/svm/svm_onhyperv.c | 1 +
arch/x86/kvm/svm/svm_onhyperv.h | 4 +-
arch/x86/kvm/vmx/capabilities.h | 4 +-
arch/x86/kvm/vmx/hyperv.c | 1 +
arch/x86/kvm/vmx/hyperv.h | 4 +-
arch/x86/kvm/vmx/nested.c | 3 +-
arch/x86/kvm/vmx/pmu_intel.c | 5 +-
arch/x86/kvm/vmx/posted_intr.c | 2 +
arch/x86/kvm/vmx/sgx.c | 5 +-
arch/x86/kvm/vmx/vmcs12.c | 1 +
arch/x86/kvm/vmx/vmx.c | 438 +++++++++++++++-------------
arch/x86/kvm/vmx/vmx_ops.h | 4 +-
arch/x86/kvm/x86.c | 248 +++++++++-------
arch/x86/kvm/xen.c | 1 +
include/kvm/arm_arch_timer.h | 6 +-
include/kvm/arm_vgic.h | 4 +
include/linux/cpuhotplug.h | 5 +-
include/linux/kvm_host.h | 13 +-
virt/kvm/Kconfig | 3 +
virt/kvm/kvm_main.c | 303 ++++++++++---------
82 files changed, 863 insertions(+), 816 deletions(-)
delete mode 100644 arch/mips/kvm/callback.c
base-commit: 3e04435fe60590a1c79ec94d60e9897c3ff7d73b
--
2.38.1.584.g0f3c55d4c2-goog
More information about the kvm-riscv
mailing list