[PATCH v2 7/7] RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
Atish Patra
atishp at atishpatra.org
Fri May 6 00:53:24 PDT 2022
On Wed, Apr 20, 2022 at 4:25 AM Anup Patel <apatel at ventanamicro.com> wrote:
>
> On RISC-V platforms with hardware VMID support, we share same
> VMID for all VCPUs of a particular Guest/VM. This means we might
> have stale G-stage TLB entries on the current Host CPU due to
> some other VCPU of the same Guest which ran previously on the
> current Host CPU.
>
> To cleanup stale TLB entries, we simply flush all G-stage TLB
> entries by VMID whenever underlying Host CPU changes for a VCPU.
>
> Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> ---
> arch/riscv/include/asm/kvm_host.h | 5 +++++
> arch/riscv/kvm/tlb.c | 23 +++++++++++++++++++++++
> arch/riscv/kvm/vcpu.c | 11 +++++++++++
> 3 files changed, 39 insertions(+)
>
> diff --git a/arch/riscv/include/asm/kvm_host.h b/arch/riscv/include/asm/kvm_host.h
> index a40e88a9481c..94349a5ffd34 100644
> --- a/arch/riscv/include/asm/kvm_host.h
> +++ b/arch/riscv/include/asm/kvm_host.h
> @@ -166,6 +166,9 @@ struct kvm_vcpu_arch {
> /* VCPU ran at least once */
> bool ran_atleast_once;
>
> + /* Last Host CPU on which Guest VCPU exited */
> + int last_exit_cpu;
> +
> /* ISA feature bits (similar to MISA) */
> unsigned long isa;
>
> @@ -256,6 +259,8 @@ void kvm_riscv_local_hfence_vvma_gva(unsigned long vmid,
> unsigned long order);
> void kvm_riscv_local_hfence_vvma_all(unsigned long vmid);
>
> +void kvm_riscv_local_tlb_sanitize(struct kvm_vcpu *vcpu);
> +
> void kvm_riscv_fence_i_process(struct kvm_vcpu *vcpu);
> void kvm_riscv_hfence_gvma_vmid_all_process(struct kvm_vcpu *vcpu);
> void kvm_riscv_hfence_vvma_all_process(struct kvm_vcpu *vcpu);
> diff --git a/arch/riscv/kvm/tlb.c b/arch/riscv/kvm/tlb.c
> index c0f86d09c41d..1a76d0b1907d 100644
> --- a/arch/riscv/kvm/tlb.c
> +++ b/arch/riscv/kvm/tlb.c
> @@ -215,6 +215,29 @@ void kvm_riscv_local_hfence_vvma_all(unsigned long vmid)
> csr_write(CSR_HGATP, hgatp);
> }
>
> +void kvm_riscv_local_tlb_sanitize(struct kvm_vcpu *vcpu)
> +{
> + unsigned long vmid;
> +
> + if (!kvm_riscv_gstage_vmid_bits() ||
> + vcpu->arch.last_exit_cpu == vcpu->cpu)
> + return;
> +
> + /*
> + * On RISC-V platforms with hardware VMID support, we share same
> + * VMID for all VCPUs of a particular Guest/VM. This means we might
> + * have stale G-stage TLB entries on the current Host CPU due to
> + * some other VCPU of the same Guest which ran previously on the
> + * current Host CPU.
> + *
> + * To cleanup stale TLB entries, we simply flush all G-stage TLB
> + * entries by VMID whenever underlying Host CPU changes for a VCPU.
> + */
> +
> + vmid = READ_ONCE(vcpu->kvm->arch.vmid.vmid);
> + kvm_riscv_local_hfence_gvma_vmid_all(vmid);
> +}
> +
> void kvm_riscv_fence_i_process(struct kvm_vcpu *vcpu)
> {
> local_flush_icache_all();
> diff --git a/arch/riscv/kvm/vcpu.c b/arch/riscv/kvm/vcpu.c
> index 9cd8f6e91c98..a86710fcd2e0 100644
> --- a/arch/riscv/kvm/vcpu.c
> +++ b/arch/riscv/kvm/vcpu.c
> @@ -67,6 +67,8 @@ static void kvm_riscv_reset_vcpu(struct kvm_vcpu *vcpu)
> if (loaded)
> kvm_arch_vcpu_put(vcpu);
>
> + vcpu->arch.last_exit_cpu = -1;
> +
> memcpy(csr, reset_csr, sizeof(*csr));
>
> memcpy(cntx, reset_cntx, sizeof(*cntx));
> @@ -735,6 +737,7 @@ static void noinstr kvm_riscv_vcpu_enter_exit(struct kvm_vcpu *vcpu)
> {
> guest_state_enter_irqoff();
> __kvm_riscv_switch_to(&vcpu->arch);
> + vcpu->arch.last_exit_cpu = vcpu->cpu;
> guest_state_exit_irqoff();
> }
>
> @@ -829,6 +832,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
> continue;
> }
>
> + /*
> + * Cleanup stale TLB enteries
> + *
> + * Note: This should be done after G-stage VMID has been
> + * updated using kvm_riscv_gstage_vmid_ver_changed()
> + */
> + kvm_riscv_local_tlb_sanitize(vcpu);
> +
> guest_timing_enter_irqoff();
>
> kvm_riscv_vcpu_enter_exit(vcpu);
> --
> 2.25.1
>
Reviewed-by: Atish Patra <atishp at rivosinc.com>
--
Regards,
Atish
More information about the kvm-riscv
mailing list