[PATCH v4 09/15] KVM: arm64: Add support for userspace to suspend a vCPU
Reiji Watanabe
reijiw at google.com
Wed Mar 23 23:44:19 PDT 2022
Hi Oliver,
On Mon, Mar 21, 2022 at 11:49 PM Oliver Upton <oupton at google.com> wrote:
>
> On Mon, Mar 21, 2022 at 11:19:33PM -0700, Reiji Watanabe wrote:
> > Hi Oliver,
> >
> > On Fri, Mar 11, 2022 at 9:41 AM Oliver Upton <oupton at google.com> wrote:
> > >
> > > Introduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU
> > > is in a suspended state. In the suspended state the vCPU will block
> > > until a wakeup event (pending interrupt) is recognized.
> > >
> > > Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to
> > > userspace that KVM has recognized one such wakeup event. It is the
> > > responsibility of userspace to then make the vCPU runnable, or leave it
> > > suspended until the next wakeup event.
> > >
> > > Signed-off-by: Oliver Upton <oupton at google.com>
> > > ---
> > > Documentation/virt/kvm/api.rst | 37 +++++++++++++++++++++++++++++--
> > > arch/arm64/include/asm/kvm_host.h | 1 +
> > > arch/arm64/kvm/arm.c | 35 +++++++++++++++++++++++++++++
> > > include/uapi/linux/kvm.h | 2 ++
> > > 4 files changed, 73 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > > index 5625c08b4a0e..426bcdc1216d 100644
> > > --- a/Documentation/virt/kvm/api.rst
> > > +++ b/Documentation/virt/kvm/api.rst
> > > @@ -1482,14 +1482,43 @@ Possible values are:
> > > [s390]
> > > KVM_MP_STATE_LOAD the vcpu is in a special load/startup state
> > > [s390]
> > > + KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting
> > > + for a wakeup event [arm64]
> > > ========================== ===============================================
> > >
> > > On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
> > > in-kernel irqchip, the multiprocessing state must be maintained by userspace on
> > > these architectures.
> > >
> > > -For arm64/riscv:
> > > -^^^^^^^^^^^^^^^^
> > > +For arm64:
> > > +^^^^^^^^^^
> > > +
> > > +If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will emulate the
> > > +architectural execution of a WFI instruction.
> > > +
> > > +If a wakeup event is recognized, KVM will exit to userspace with a
> > > +KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If
> > > +userspace wants to honor the wakeup, it must set the vCPU's MP state to
> > > +KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup
> > > +event in subsequent calls to KVM_RUN.
> > > +
> > > +.. warning::
> > > +
> > > + If userspace intends to keep the vCPU in a SUSPENDED state, it is
> > > + strongly recommended that userspace take action to suppress the
> > > + wakeup event (such as masking an interrupt). Otherwise, subsequent
> > > + calls to KVM_RUN will immediately exit with a KVM_SYSTEM_EVENT_WAKEUP
> > > + event and inadvertently waste CPU cycles.
> > > +
> > > + Additionally, if userspace takes action to suppress a wakeup event,
> > > + it is strongly recommended that it also restore the vCPU to its
> >
> > Nit: s/restore/restores/ ?
> >
> >
> > > + original state when the vCPU is made RUNNABLE again. For example,
> > > + if userspace masked a pending interrupt to suppress the wakeup,
> > > + the interrupt should be unmasked before returning control to the
> > > + guest.
> > > +
> > > +For riscv:
> > > +^^^^^^^^^^
> > >
> > > The only states that are valid are KVM_MP_STATE_STOPPED and
> > > KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.
> > > @@ -5914,6 +5943,7 @@ should put the acknowledged interrupt vector into the 'epr' field.
> > > #define KVM_SYSTEM_EVENT_SHUTDOWN 1
> > > #define KVM_SYSTEM_EVENT_RESET 2
> > > #define KVM_SYSTEM_EVENT_CRASH 3
> > > + #define KVM_SYSTEM_EVENT_WAKEUP 4
> > > __u32 type;
> > > __u64 flags;
> > > } system_event;
> > > @@ -5938,6 +5968,9 @@ Valid values for 'type' are:
> > > has requested a crash condition maintenance. Userspace can choose
> > > to ignore the request, or to gather VM memory core dump and/or
> > > reset/shutdown of the VM.
> > > + - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM
> >
> > Nit: Shouldn't 'the guest' be 'the vcpu' ?
> >
> > > + has recognized a wakeup event. Userspace may honor this event by marking
> > > + the exiting vCPU as runnable, or deny it and call KVM_RUN again.
> > >
> > > Valid flags are:
> > >
> > > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> > > index da58eb96d2a8..899f2c0b4c7b 100644
> > > --- a/arch/arm64/include/asm/kvm_host.h
> > > +++ b/arch/arm64/include/asm/kvm_host.h
> > > @@ -46,6 +46,7 @@
> > > #define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3)
> > > #define KVM_REQ_RELOAD_GICv4 KVM_ARCH_REQ(4)
> > > #define KVM_REQ_RELOAD_PMU KVM_ARCH_REQ(5)
> > > +#define KVM_REQ_SUSPEND KVM_ARCH_REQ(6)
> > >
> > > #define KVM_DIRTY_LOG_MANUAL_CAPS (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \
> > > KVM_DIRTY_LOG_INITIALLY_SET)
> > > diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
> > > index 8eed0556ccaa..b94efa05d869 100644
> > > --- a/arch/arm64/kvm/arm.c
> > > +++ b/arch/arm64/kvm/arm.c
> > > @@ -444,6 +444,18 @@ bool kvm_arm_vcpu_stopped(struct kvm_vcpu *vcpu)
> > > return vcpu->arch.mp_state.mp_state == KVM_MP_STATE_STOPPED;
> > > }
> > >
> > > +static void kvm_arm_vcpu_suspend(struct kvm_vcpu *vcpu)
> > > +{
> > > + vcpu->arch.mp_state.mp_state = KVM_MP_STATE_SUSPENDED;
> > > + kvm_make_request(KVM_REQ_SUSPEND, vcpu);
> > > + kvm_vcpu_kick(vcpu);
> > > +}
> > > +
> > > +static bool kvm_arm_vcpu_suspended(struct kvm_vcpu *vcpu)
> > > +{
> > > + return vcpu->arch.mp_state.mp_state == KVM_MP_STATE_SUSPENDED;
> > > +}
> > > +
> > > int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
> > > struct kvm_mp_state *mp_state)
> > > {
> > > @@ -464,6 +476,9 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
> > > case KVM_MP_STATE_STOPPED:
> > > kvm_arm_vcpu_power_off(vcpu);
> > > break;
> > > + case KVM_MP_STATE_SUSPENDED:
> > > + kvm_arm_vcpu_suspend(vcpu);
> > > + break;
> > > default:
> > > ret = -EINVAL;
> > > }
> > > @@ -648,6 +663,23 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)
> > > preempt_enable();
> > > }
> > >
> > > +static int kvm_vcpu_suspend(struct kvm_vcpu *vcpu)
> > > +{
> > > + if (!kvm_arm_vcpu_suspended(vcpu))
> > > + return 1;
> > > +
> > > + kvm_vcpu_wfi(vcpu);
> > > +
> > > + /*
> > > + * The suspend state is sticky; we do not leave it until userspace
> > > + * explicitly marks the vCPU as runnable. Request that we suspend again
> > > + * later.
> > > + */
> > > + kvm_make_request(KVM_REQ_SUSPEND, vcpu);
> > > + kvm_vcpu_set_system_event_exit(vcpu, KVM_SYSTEM_EVENT_WAKEUP, 0);
> > > + return 0;
> > > +}
> > > +
> > > /**
> > > * check_vcpu_requests - check and handle pending vCPU requests
> > > * @vcpu: the VCPU pointer
> > > @@ -686,6 +718,9 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)
> > > if (kvm_check_request(KVM_REQ_RELOAD_PMU, vcpu))
> > > kvm_pmu_handle_pmcr(vcpu,
> > > __vcpu_sys_reg(vcpu, PMCR_EL0));
> > > +
> > > + if (kvm_check_request(KVM_REQ_SUSPEND, vcpu))
> > > + return kvm_vcpu_suspend(vcpu);
> >
> > It appears that one of the cases that kvm_vcpu_suspend() returns
> > is when a pending signal is detected, and the exit reason will be
> > KVM_EXIT_SYSTEM_EVENT in this case. On the other hand, when a
> > pending signal is detected earlier in xfer_to_guest_mode_handle_work(),
> > KVM_RUN returns -EINTR even if the vCPU is in KVM_MP_STATE_SUSPENDED
> > state. Shouldn't those behaviors be consistent ? (Perhaps -EINTR?)
>
> Great catch!
>
> I should probably check that the vCPU is actually runnable with
> kvm_arch_vcpu_runnable() before setting up a system event exit. That is
> after all what the documentation of this whole API says it does, right?
> :)
>
> If the vCPU thread were poked for any other reason this should return 1
> and let the kvm_vcpu_exit_request()/xfer_to_guest_mode_handle_work()
> pairing clean up anything else.
Yes, that sounds good.
Thanks,
Reiji
More information about the kvm-riscv
mailing list