[PATCH v11 6/8] cpuidle: Add RISC-V SBI CPU idle driver

Anup Patel anup at brainfault.org
Sat Mar 12 00:34:35 PST 2022


Hi Rafael,

On Thu, Feb 10, 2022 at 11:21 AM Anup Patel <apatel at ventanamicro.com> wrote:
>
> From: Anup Patel <anup.patel at wdc.com>
>
> The RISC-V SBI HSM extension provides HSM suspend call which can
> be used by Linux RISC-V to enter platform specific low-power state.
>
> This patch adds a CPU idle driver based on RISC-V SBI calls which
> will populate idle states from device tree and use SBI calls to
> entry these idle states.
>
> Signed-off-by: Anup Patel <anup.patel at wdc.com>
> Signed-off-by: Anup Patel <apatel at ventanamicro.com>

Does this driver look okay to you ?

Best Regards,
Anup Patel

> ---
>  MAINTAINERS                         |   7 +
>  drivers/cpuidle/Kconfig             |   5 +
>  drivers/cpuidle/Kconfig.riscv       |  15 +
>  drivers/cpuidle/Makefile            |   4 +
>  drivers/cpuidle/cpuidle-riscv-sbi.c | 627 ++++++++++++++++++++++++++++
>  5 files changed, 658 insertions(+)
>  create mode 100644 drivers/cpuidle/Kconfig.riscv
>  create mode 100644 drivers/cpuidle/cpuidle-riscv-sbi.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 39ece23e8d93..2ff0055a26a7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5058,6 +5058,13 @@ S:       Supported
>  F:     drivers/cpuidle/dt_idle_genpd.c
>  F:     drivers/cpuidle/dt_idle_genpd.h
>
> +CPUIDLE DRIVER - RISC-V SBI
> +M:     Anup Patel <anup at brainfault.org>
> +L:     linux-pm at vger.kernel.org
> +L:     linux-riscv at lists.infradead.org
> +S:     Maintained
> +F:     drivers/cpuidle/cpuidle-riscv-sbi.c
> +
>  CRAMFS FILESYSTEM
>  M:     Nicolas Pitre <nico at fluxnic.net>
>  S:     Maintained
> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
> index f1afe7ab6b54..ff71dd662880 100644
> --- a/drivers/cpuidle/Kconfig
> +++ b/drivers/cpuidle/Kconfig
> @@ -66,6 +66,11 @@ depends on PPC
>  source "drivers/cpuidle/Kconfig.powerpc"
>  endmenu
>
> +menu "RISC-V CPU Idle Drivers"
> +depends on RISCV
> +source "drivers/cpuidle/Kconfig.riscv"
> +endmenu
> +
>  config HALTPOLL_CPUIDLE
>         tristate "Halt poll cpuidle driver"
>         depends on X86 && KVM_GUEST
> diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv
> new file mode 100644
> index 000000000000..78518c26af74
> --- /dev/null
> +++ b/drivers/cpuidle/Kconfig.riscv
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# RISC-V CPU Idle drivers
> +#
> +
> +config RISCV_SBI_CPUIDLE
> +       bool "RISC-V SBI CPU idle Driver"
> +       depends on RISCV_SBI
> +       select DT_IDLE_STATES
> +       select CPU_IDLE_MULTIPLE_DRIVERS
> +       select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF
> +       help
> +         Select this option to enable RISC-V SBI firmware based CPU idle
> +         driver for RISC-V systems. This drivers also supports hierarchical
> +         DT based layout of the idle state.
> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> index 11a26cef279f..d103342b7cfc 100644
> --- a/drivers/cpuidle/Makefile
> +++ b/drivers/cpuidle/Makefile
> @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE)                += cpuidle-cps.o
>  # POWERPC drivers
>  obj-$(CONFIG_PSERIES_CPUIDLE)          += cpuidle-pseries.o
>  obj-$(CONFIG_POWERNV_CPUIDLE)          += cpuidle-powernv.o
> +
> +###############################################################################
> +# RISC-V drivers
> +obj-$(CONFIG_RISCV_SBI_CPUIDLE)                += cpuidle-riscv-sbi.o
> diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c
> new file mode 100644
> index 000000000000..b459eda2cd37
> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
> @@ -0,0 +1,627 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * RISC-V SBI CPU idle driver.
> + *
> + * Copyright (c) 2021 Western Digital Corporation or its affiliates.
> + * Copyright (c) 2022 Ventana Micro Systems Inc.
> + */
> +
> +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt
> +
> +#include <linux/cpuidle.h>
> +#include <linux/cpumask.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/pm_runtime.h>
> +#include <asm/cpuidle.h>
> +#include <asm/sbi.h>
> +#include <asm/suspend.h>
> +
> +#include "dt_idle_states.h"
> +#include "dt_idle_genpd.h"
> +
> +struct sbi_cpuidle_data {
> +       u32 *states;
> +       struct device *dev;
> +};
> +
> +struct sbi_domain_state {
> +       bool available;
> +       u32 state;
> +};
> +
> +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data);
> +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state);
> +static bool sbi_cpuidle_use_osi;
> +static bool sbi_cpuidle_use_cpuhp;
> +static bool sbi_cpuidle_pd_allow_domain_state;
> +
> +static inline void sbi_set_domain_state(u32 state)
> +{
> +       struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> +
> +       data->available = true;
> +       data->state = state;
> +}
> +
> +static inline u32 sbi_get_domain_state(void)
> +{
> +       struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> +
> +       return data->state;
> +}
> +
> +static inline void sbi_clear_domain_state(void)
> +{
> +       struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> +
> +       data->available = false;
> +}
> +
> +static inline bool sbi_is_domain_state_available(void)
> +{
> +       struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> +
> +       return data->available;
> +}
> +
> +static int sbi_suspend_finisher(unsigned long suspend_type,
> +                               unsigned long resume_addr,
> +                               unsigned long opaque)
> +{
> +       struct sbiret ret;
> +
> +       ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
> +                       suspend_type, resume_addr, opaque, 0, 0, 0);
> +
> +       return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
> +}
> +
> +static int sbi_suspend(u32 state)
> +{
> +       if (state & SBI_HSM_SUSP_NON_RET_BIT)
> +               return cpu_suspend(state, sbi_suspend_finisher);
> +       else
> +               return sbi_suspend_finisher(state, 0, 0);
> +}
> +
> +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
> +                                  struct cpuidle_driver *drv, int idx)
> +{
> +       u32 *states = __this_cpu_read(sbi_cpuidle_data.states);
> +
> +       return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]);
> +}
> +
> +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev,
> +                                         struct cpuidle_driver *drv, int idx,
> +                                         bool s2idle)
> +{
> +       struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data);
> +       u32 *states = data->states;
> +       struct device *pd_dev = data->dev;
> +       u32 state;
> +       int ret;
> +
> +       ret = cpu_pm_enter();
> +       if (ret)
> +               return -1;
> +
> +       /* Do runtime PM to manage a hierarchical CPU toplogy. */
> +       rcu_irq_enter_irqson();
> +       if (s2idle)
> +               dev_pm_genpd_suspend(pd_dev);
> +       else
> +               pm_runtime_put_sync_suspend(pd_dev);
> +       rcu_irq_exit_irqson();
> +
> +       if (sbi_is_domain_state_available())
> +               state = sbi_get_domain_state();
> +       else
> +               state = states[idx];
> +
> +       ret = sbi_suspend(state) ? -1 : idx;
> +
> +       rcu_irq_enter_irqson();
> +       if (s2idle)
> +               dev_pm_genpd_resume(pd_dev);
> +       else
> +               pm_runtime_get_sync(pd_dev);
> +       rcu_irq_exit_irqson();
> +
> +       cpu_pm_exit();
> +
> +       /* Clear the domain state to start fresh when back from idle. */
> +       sbi_clear_domain_state();
> +       return ret;
> +}
> +
> +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev,
> +                                      struct cpuidle_driver *drv, int idx)
> +{
> +       return __sbi_enter_domain_idle_state(dev, drv, idx, false);
> +}
> +
> +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev,
> +                                             struct cpuidle_driver *drv,
> +                                             int idx)
> +{
> +       return __sbi_enter_domain_idle_state(dev, drv, idx, true);
> +}
> +
> +static int sbi_cpuidle_cpuhp_up(unsigned int cpu)
> +{
> +       struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev);
> +
> +       if (pd_dev)
> +               pm_runtime_get_sync(pd_dev);
> +
> +       return 0;
> +}
> +
> +static int sbi_cpuidle_cpuhp_down(unsigned int cpu)
> +{
> +       struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev);
> +
> +       if (pd_dev) {
> +               pm_runtime_put_sync(pd_dev);
> +               /* Clear domain state to start fresh at next online. */
> +               sbi_clear_domain_state();
> +       }
> +
> +       return 0;
> +}
> +
> +static void sbi_idle_init_cpuhp(void)
> +{
> +       int err;
> +
> +       if (!sbi_cpuidle_use_cpuhp)
> +               return;
> +
> +       err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING,
> +                                       "cpuidle/sbi:online",
> +                                       sbi_cpuidle_cpuhp_up,
> +                                       sbi_cpuidle_cpuhp_down);
> +       if (err)
> +               pr_warn("Failed %d while setup cpuhp state\n", err);
> +}
> +
> +static const struct of_device_id sbi_cpuidle_state_match[] = {
> +       { .compatible = "riscv,idle-state",
> +         .data = sbi_cpuidle_enter_state },
> +       { },
> +};
> +
> +static bool sbi_suspend_state_is_valid(u32 state)
> +{
> +       if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
> +           state < SBI_HSM_SUSPEND_RET_PLATFORM)
> +               return false;
> +       if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
> +           state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
> +               return false;
> +       return true;
> +}
> +
> +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
> +{
> +       int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state);
> +
> +       if (err) {
> +               pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np);
> +               return err;
> +       }
> +
> +       if (!sbi_suspend_state_is_valid(*state)) {
> +               pr_warn("Invalid SBI suspend state %#x\n", *state);
> +               return -EINVAL;
> +       }
> +
> +       return 0;
> +}
> +
> +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv,
> +                                    struct sbi_cpuidle_data *data,
> +                                    unsigned int state_count, int cpu)
> +{
> +       /* Currently limit the hierarchical topology to be used in OSI mode. */
> +       if (!sbi_cpuidle_use_osi)
> +               return 0;
> +
> +       data->dev = dt_idle_attach_cpu(cpu, "sbi");
> +       if (IS_ERR_OR_NULL(data->dev))
> +               return PTR_ERR_OR_ZERO(data->dev);
> +
> +       /*
> +        * Using the deepest state for the CPU to trigger a potential selection
> +        * of a shared state for the domain, assumes the domain states are all
> +        * deeper states.
> +        */
> +       drv->states[state_count - 1].enter = sbi_enter_domain_idle_state;
> +       drv->states[state_count - 1].enter_s2idle =
> +                                       sbi_enter_s2idle_domain_idle_state;
> +       sbi_cpuidle_use_cpuhp = true;
> +
> +       return 0;
> +}
> +
> +static int sbi_cpuidle_dt_init_states(struct device *dev,
> +                                       struct cpuidle_driver *drv,
> +                                       unsigned int cpu,
> +                                       unsigned int state_count)
> +{
> +       struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu);
> +       struct device_node *state_node;
> +       struct device_node *cpu_node;
> +       u32 *states;
> +       int i, ret;
> +
> +       cpu_node = of_cpu_device_node_get(cpu);
> +       if (!cpu_node)
> +               return -ENODEV;
> +
> +       states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL);
> +       if (!states) {
> +               ret = -ENOMEM;
> +               goto fail;
> +       }
> +
> +       /* Parse SBI specific details from state DT nodes */
> +       for (i = 1; i < state_count; i++) {
> +               state_node = of_get_cpu_state_node(cpu_node, i - 1);
> +               if (!state_node)
> +                       break;
> +
> +               ret = sbi_dt_parse_state_node(state_node, &states[i]);
> +               of_node_put(state_node);
> +
> +               if (ret)
> +                       return ret;
> +
> +               pr_debug("sbi-state %#x index %d\n", states[i], i);
> +       }
> +       if (i != state_count) {
> +               ret = -ENODEV;
> +               goto fail;
> +       }
> +
> +       /* Initialize optional data, used for the hierarchical topology. */
> +       ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu);
> +       if (ret < 0)
> +               return ret;
> +
> +       /* Store states in the per-cpu struct. */
> +       data->states = states;
> +
> +fail:
> +       of_node_put(cpu_node);
> +
> +       return ret;
> +}
> +
> +static void sbi_cpuidle_deinit_cpu(int cpu)
> +{
> +       struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu);
> +
> +       dt_idle_detach_cpu(data->dev);
> +       sbi_cpuidle_use_cpuhp = false;
> +}
> +
> +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu)
> +{
> +       struct cpuidle_driver *drv;
> +       unsigned int state_count = 0;
> +       int ret = 0;
> +
> +       drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
> +       if (!drv)
> +               return -ENOMEM;
> +
> +       drv->name = "sbi_cpuidle";
> +       drv->owner = THIS_MODULE;
> +       drv->cpumask = (struct cpumask *)cpumask_of(cpu);
> +
> +       /* RISC-V architectural WFI to be represented as state index 0. */
> +       drv->states[0].enter = sbi_cpuidle_enter_state;
> +       drv->states[0].exit_latency = 1;
> +       drv->states[0].target_residency = 1;
> +       drv->states[0].power_usage = UINT_MAX;
> +       strcpy(drv->states[0].name, "WFI");
> +       strcpy(drv->states[0].desc, "RISC-V WFI");
> +
> +       /*
> +        * If no DT idle states are detected (ret == 0) let the driver
> +        * initialization fail accordingly since there is no reason to
> +        * initialize the idle driver if only wfi is supported, the
> +        * default archictectural back-end already executes wfi
> +        * on idle entry.
> +        */
> +       ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1);
> +       if (ret <= 0) {
> +               pr_debug("HART%ld: failed to parse DT idle states\n",
> +                        cpuid_to_hartid_map(cpu));
> +               return ret ? : -ENODEV;
> +       }
> +       state_count = ret + 1; /* Include WFI state as well */
> +
> +       /* Initialize idle states from DT. */
> +       ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count);
> +       if (ret) {
> +               pr_err("HART%ld: failed to init idle states\n",
> +                      cpuid_to_hartid_map(cpu));
> +               return ret;
> +       }
> +
> +       ret = cpuidle_register(drv, NULL);
> +       if (ret)
> +               goto deinit;
> +
> +       cpuidle_cooling_register(drv);
> +
> +       return 0;
> +deinit:
> +       sbi_cpuidle_deinit_cpu(cpu);
> +       return ret;
> +}
> +
> +static void sbi_cpuidle_domain_sync_state(struct device *dev)
> +{
> +       /*
> +        * All devices have now been attached/probed to the PM domain
> +        * topology, hence it's fine to allow domain states to be picked.
> +        */
> +       sbi_cpuidle_pd_allow_domain_state = true;
> +}
> +
> +#ifdef CONFIG_DT_IDLE_GENPD
> +
> +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd)
> +{
> +       struct genpd_power_state *state = &pd->states[pd->state_idx];
> +       u32 *pd_state;
> +
> +       if (!state->data)
> +               return 0;
> +
> +       if (!sbi_cpuidle_pd_allow_domain_state)
> +               return -EBUSY;
> +
> +       /* OSI mode is enabled, set the corresponding domain state. */
> +       pd_state = state->data;
> +       sbi_set_domain_state(*pd_state);
> +
> +       return 0;
> +}
> +
> +struct sbi_pd_provider {
> +       struct list_head link;
> +       struct device_node *node;
> +};
> +
> +static LIST_HEAD(sbi_pd_providers);
> +
> +static int sbi_pd_init(struct device_node *np)
> +{
> +       struct generic_pm_domain *pd;
> +       struct sbi_pd_provider *pd_provider;
> +       struct dev_power_governor *pd_gov;
> +       int ret = -ENOMEM, state_count = 0;
> +
> +       pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node);
> +       if (!pd)
> +               goto out;
> +
> +       pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL);
> +       if (!pd_provider)
> +               goto free_pd;
> +
> +       pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN;
> +
> +       /* Allow power off when OSI is available. */
> +       if (sbi_cpuidle_use_osi)
> +               pd->power_off = sbi_cpuidle_pd_power_off;
> +       else
> +               pd->flags |= GENPD_FLAG_ALWAYS_ON;
> +
> +       /* Use governor for CPU PM domains if it has some states to manage. */
> +       pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL;
> +
> +       ret = pm_genpd_init(pd, pd_gov, false);
> +       if (ret)
> +               goto free_pd_prov;
> +
> +       ret = of_genpd_add_provider_simple(np, pd);
> +       if (ret)
> +               goto remove_pd;
> +
> +       pd_provider->node = of_node_get(np);
> +       list_add(&pd_provider->link, &sbi_pd_providers);
> +
> +       pr_debug("init PM domain %s\n", pd->name);
> +       return 0;
> +
> +remove_pd:
> +       pm_genpd_remove(pd);
> +free_pd_prov:
> +       kfree(pd_provider);
> +free_pd:
> +       dt_idle_pd_free(pd);
> +out:
> +       pr_err("failed to init PM domain ret=%d %pOF\n", ret, np);
> +       return ret;
> +}
> +
> +static void sbi_pd_remove(void)
> +{
> +       struct sbi_pd_provider *pd_provider, *it;
> +       struct generic_pm_domain *genpd;
> +
> +       list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) {
> +               of_genpd_del_provider(pd_provider->node);
> +
> +               genpd = of_genpd_remove_last(pd_provider->node);
> +               if (!IS_ERR(genpd))
> +                       kfree(genpd);
> +
> +               of_node_put(pd_provider->node);
> +               list_del(&pd_provider->link);
> +               kfree(pd_provider);
> +       }
> +}
> +
> +static int sbi_genpd_probe(struct device_node *np)
> +{
> +       struct device_node *node;
> +       int ret = 0, pd_count = 0;
> +
> +       if (!np)
> +               return -ENODEV;
> +
> +       /*
> +        * Parse child nodes for the "#power-domain-cells" property and
> +        * initialize a genpd/genpd-of-provider pair when it's found.
> +        */
> +       for_each_child_of_node(np, node) {
> +               if (!of_find_property(node, "#power-domain-cells", NULL))
> +                       continue;
> +
> +               ret = sbi_pd_init(node);
> +               if (ret)
> +                       goto put_node;
> +
> +               pd_count++;
> +       }
> +
> +       /* Bail out if not using the hierarchical CPU topology. */
> +       if (!pd_count)
> +               goto no_pd;
> +
> +       /* Link genpd masters/subdomains to model the CPU topology. */
> +       ret = dt_idle_pd_init_topology(np);
> +       if (ret)
> +               goto remove_pd;
> +
> +       return 0;
> +
> +put_node:
> +       of_node_put(node);
> +remove_pd:
> +       sbi_pd_remove();
> +       pr_err("failed to create CPU PM domains ret=%d\n", ret);
> +no_pd:
> +       return ret;
> +}
> +
> +#else
> +
> +static inline int sbi_genpd_probe(struct device_node *np)
> +{
> +       return 0;
> +}
> +
> +#endif
> +
> +static int sbi_cpuidle_probe(struct platform_device *pdev)
> +{
> +       int cpu, ret;
> +       struct cpuidle_driver *drv;
> +       struct cpuidle_device *dev;
> +       struct device_node *np, *pds_node;
> +
> +       /* Detect OSI support based on CPU DT nodes */
> +       sbi_cpuidle_use_osi = true;
> +       for_each_possible_cpu(cpu) {
> +               np = of_cpu_device_node_get(cpu);
> +               if (np &&
> +                   of_find_property(np, "power-domains", NULL) &&
> +                   of_find_property(np, "power-domain-names", NULL)) {
> +                       continue;
> +               } else {
> +                       sbi_cpuidle_use_osi = false;
> +                       break;
> +               }
> +       }
> +
> +       /* Populate generic power domains from DT nodes */
> +       pds_node = of_find_node_by_path("/cpus/power-domains");
> +       if (pds_node) {
> +               ret = sbi_genpd_probe(pds_node);
> +               of_node_put(pds_node);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       /* Initialize CPU idle driver for each CPU */
> +       for_each_possible_cpu(cpu) {
> +               ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu);
> +               if (ret) {
> +                       pr_debug("HART%ld: idle driver init failed\n",
> +                                cpuid_to_hartid_map(cpu));
> +                       goto out_fail;
> +               }
> +       }
> +
> +       /* Setup CPU hotplut notifiers */
> +       sbi_idle_init_cpuhp();
> +
> +       pr_info("idle driver registered for all CPUs\n");
> +
> +       return 0;
> +
> +out_fail:
> +       while (--cpu >= 0) {
> +               dev = per_cpu(cpuidle_devices, cpu);
> +               drv = cpuidle_get_cpu_driver(dev);
> +               cpuidle_unregister(drv);
> +               sbi_cpuidle_deinit_cpu(cpu);
> +       }
> +
> +       return ret;
> +}
> +
> +static struct platform_driver sbi_cpuidle_driver = {
> +       .probe = sbi_cpuidle_probe,
> +       .driver = {
> +               .name = "sbi-cpuidle",
> +               .sync_state = sbi_cpuidle_domain_sync_state,
> +       },
> +};
> +
> +static int __init sbi_cpuidle_init(void)
> +{
> +       int ret;
> +       struct platform_device *pdev;
> +
> +       /*
> +        * The SBI HSM suspend function is only available when:
> +        * 1) SBI version is 0.3 or higher
> +        * 2) SBI HSM extension is available
> +        */
> +       if ((sbi_spec_version < sbi_mk_version(0, 3)) ||
> +           sbi_probe_extension(SBI_EXT_HSM) <= 0) {
> +               pr_info("HSM suspend not available\n");
> +               return 0;
> +       }
> +
> +       ret = platform_driver_register(&sbi_cpuidle_driver);
> +       if (ret)
> +               return ret;
> +
> +       pdev = platform_device_register_simple("sbi-cpuidle",
> +                                               -1, NULL, 0);
> +       if (IS_ERR(pdev)) {
> +               platform_driver_unregister(&sbi_cpuidle_driver);
> +               return PTR_ERR(pdev);
> +       }
> +
> +       return 0;
> +}
> +device_initcall(sbi_cpuidle_init);
> --
> 2.25.1
>



More information about the kvm-riscv mailing list