[PATCH v10 8/8] RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
Anup Patel
anup at brainfault.org
Tue Feb 8 00:54:04 PST 2022
On Tue, Feb 8, 2022 at 12:16 PM Guo Ren <guoren at kernel.org> wrote:
>
> Another question:
>
> Have you put "idle-states {" in qemu's DTS? or how do you test your patches?
I usually do the following:
1) Dump QEMU virt machine DTB
2) Convert QEMU virt machine DTB into DTS
3) Add "idle-states" in QEMU virt machine DTS
4) Create QEMU virt machine DTB with "idle-states"
5) Use the new QEMU virt machine DTB for testing this series.
Here's one of the DTS files which I used for testing on QEMU virt machine:
/dts-v1/;
/ {
#address-cells = <0x02>;
#size-cells = <0x02>;
compatible = "riscv-virtio";
model = "riscv-virtio,qemu";
chosen {
linux,initrd-end = <0x8855d200>;
linux,initrd-start = <0x88200000>;
bootargs = "root=/dev/ram rw console=ttyS0 earlycon";
stdout-path = "/soc/uart at 10000000";
};
memory at 80000000 {
device_type = "memory";
reg = <0x00 0x80000000 0x00 0x10000000>;
};
cpus {
#address-cells = <0x01>;
#size-cells = <0x00>;
timebase-frequency = <0x989680>;
cpu at 0 {
phandle = <0x07>;
device_type = "cpu";
reg = <0x00>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_NONRET_DEF>;
interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x08>;
};
};
cpu at 1 {
phandle = <0x05>;
device_type = "cpu";
reg = <0x01>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_DEF>;
interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x06>;
};
};
cpu at 2 {
phandle = <0x03>;
device_type = "cpu";
reg = <0x02>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_NONRET_DEF>;
interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x04>;
};
};
cpu at 3 {
phandle = <0x01>;
device_type = "cpu";
reg = <0x03>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_DEF>;
interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x02>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <0x07>;
};
core1 {
cpu = <0x05>;
};
core2 {
cpu = <0x03>;
};
core3 {
cpu = <0x01>;
};
};
};
idle-states {
CPU_RET_DEF: cpu-retentive-default {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x00000000>;
entry-latency-us = <10>;
exit-latency-us = <10>;
min-residency-us = <100>;
};
CPU_NONRET_DEF: cpu-nonretentive-default {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x80000000>;
entry-latency-us = <100>;
exit-latency-us = <100>;
min-residency-us = <1000>;
};
};
};
soc {
#address-cells = <0x02>;
#size-cells = <0x02>;
compatible = "simple-bus";
ranges;
flash at 20000000 {
bank-width = <0x04>;
reg = <0x00 0x20000000 0x00 0x2000000 0x00 0x22000000 0x00
0x2000000>;
compatible = "cfi-flash";
};
rtc at 101000 {
interrupts = <0x0b>;
interrupt-parent = <0x09>;
reg = <0x00 0x101000 0x00 0x1000>;
compatible = "google,goldfish-rtc";
};
uart at 10000000 {
interrupts = <0x0a>;
interrupt-parent = <0x09>;
clock-frequency = <0x384000>;
reg = <0x00 0x10000000 0x00 0x100>;
compatible = "ns16550a";
};
poweroff {
value = <0x5555>;
offset = <0x00>;
regmap = <0x0a>;
compatible = "syscon-poweroff";
};
reboot {
value = <0x7777>;
offset = <0x00>;
regmap = <0x0a>;
compatible = "syscon-reboot";
};
test at 100000 {
phandle = <0x0a>;
reg = <0x00 0x100000 0x00 0x1000>;
compatible = "sifive,test1\0sifive,test0\0syscon";
};
pci at 30000000 {
interrupt-map-mask = <0x1800 0x00 0x00 0x07>;
interrupt-map = <0x00 0x00 0x00 0x01 0x09 0x20 0x00 0x00
0x00 0x02 0x09 0x21 0x00 0x00 0x00 0x03 0x09 0x22 0x00 0x00 0x00 0x04
0x09 0x23 0x800 0x00 0x00 0x01 0x09 0x21 0x800 0x00 0x00 0x02 0x09
0x22 0x800 0x00 0x00 0x03 0x09 0x23 0x800 0x00 0x00 0x04 0x09 0x20
0x1000 0x00 0x00 0x01 0x09 0x22 0x1000 0x00 0x00 0x02 0x09 0x23 0x1000
0x00 0x00 0x03 0x09 0x20 0x1000 0x00 0x00 0x04 0x09 0x21 0x1800 0x00
0x00 0x01 0x09 0x23 0x1800 0x00 0x00 0x02 0x09 0x20 0x1800 0x00 0x00
0x03 0x09 0x21 0x1800 0x00 0x00 0x04 0x09 0x22>;
ranges = <0x1000000 0x00 0x00 0x00 0x3000000 0x00 0x10000
0x2000000 0x00 0x40000000 0x00 0x40000000 0x00 0x40000000>;
reg = <0x00 0x30000000 0x00 0x10000000>;
dma-coherent;
bus-range = <0x00 0xff>;
linux,pci-domain = <0x00>;
device_type = "pci";
compatible = "pci-host-ecam-generic";
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
#address-cells = <0x03>;
};
virtio_mmio at 10008000 {
interrupts = <0x08>;
interrupt-parent = <0x09>;
reg = <0x00 0x10008000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10007000 {
interrupts = <0x07>;
interrupt-parent = <0x09>;
reg = <0x00 0x10007000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10006000 {
interrupts = <0x06>;
interrupt-parent = <0x09>;
reg = <0x00 0x10006000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10005000 {
interrupts = <0x05>;
interrupt-parent = <0x09>;
reg = <0x00 0x10005000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10004000 {
interrupts = <0x04>;
interrupt-parent = <0x09>;
reg = <0x00 0x10004000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10003000 {
interrupts = <0x03>;
interrupt-parent = <0x09>;
reg = <0x00 0x10003000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10002000 {
interrupts = <0x02>;
interrupt-parent = <0x09>;
reg = <0x00 0x10002000 0x00 0x1000>;
compatible = "virtio,mmio";
};
virtio_mmio at 10001000 {
interrupts = <0x01>;
interrupt-parent = <0x09>;
reg = <0x00 0x10001000 0x00 0x1000>;
compatible = "virtio,mmio";
};
plic at c000000 {
phandle = <0x09>;
riscv,ndev = <0x35>;
reg = <0x00 0xc000000 0x00 0x210000>;
interrupts-extended = <0x08 0x0b 0x08 0x09 0x06 0x0b 0x06
0x09 0x04 0x0b 0x04 0x09 0x02 0x0b 0x02 0x09>;
interrupt-controller;
compatible = "riscv,plic0";
#interrupt-cells = <0x01>;
#address-cells = <0x00>;
};
clint at 2000000 {
interrupts-extended = <0x08 0x03 0x08 0x07 0x06 0x03 0x06
0x07 0x04 0x03 0x04 0x07 0x02 0x03 0x02 0x07>;
reg = <0x00 0x2000000 0x00 0x10000>;
compatible = "riscv,clint0";
};
};
};
Regards,
Anup
More information about the kvm-riscv
mailing list