[PATCH RFC v4 13/15] target/riscv: Introduce dynamic time frequency for virt machine
Yifei Jiang
jiangyifei at huawei.com
Thu Dec 3 07:47:01 EST 2020
Currently, time base frequency was fixed as SIFIVE_CLINT_TIMEBASE_FREQ.
Here introduce "time-frequency" property to set time base frequency dynamically
of which default value is still SIFIVE_CLINT_TIMEBASE_FREQ. The virt machine
uses frequency of the first cpu to create clint and fdt.
Signed-off-by: Yifei Jiang <jiangyifei at huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1 at huawei.com>
---
hw/riscv/virt.c | 18 ++++++++++++++----
target/riscv/cpu.c | 3 +++
target/riscv/cpu.h | 2 ++
3 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 47b7018193..788a7237b6 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -178,7 +178,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename,
}
static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
- uint64_t mem_size, const char *cmdline)
+ uint64_t mem_size, const char *cmdline, uint64_t timebase_frequency)
{
void *fdt;
int i, cpu, socket;
@@ -225,7 +225,7 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
qemu_fdt_add_subnode(fdt, "/cpus");
qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
- SIFIVE_CLINT_TIMEBASE_FREQ);
+ timebase_frequency);
qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
@@ -510,6 +510,7 @@ static void virt_machine_init(MachineState *machine)
target_ulong firmware_end_addr, kernel_start_addr;
uint32_t fdt_load_addr;
uint64_t kernel_entry;
+ uint64_t timebase_frequency = 0;
DeviceState *mmio_plic, *virtio_plic, *pcie_plic;
int i, j, base_hartid, hart_count;
CPUState *cs;
@@ -553,12 +554,20 @@ static void virt_machine_init(MachineState *machine)
hart_count, &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort);
+ if (!timebase_frequency) {
+ timebase_frequency = RISCV_CPU(first_cpu)->env.frequency;
+ }
+ /* If vcpu's time frequency is not specified, we use default frequency */
+ if (!timebase_frequency) {
+ timebase_frequency = SIFIVE_CLINT_TIMEBASE_FREQ;
+ }
+
/* Per-socket CLINT */
sifive_clint_create(
memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size,
memmap[VIRT_CLINT].size, base_hartid, hart_count,
SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
- SIFIVE_CLINT_TIMEBASE_FREQ, true);
+ timebase_frequency, true);
/* Per-socket PLIC hart topology configuration string */
plic_hart_config_len =
@@ -610,7 +619,8 @@ static void virt_machine_init(MachineState *machine)
main_mem);
/* create device tree */
- create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+ create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+ timebase_frequency);
/* boot rom */
memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 439dc89ee7..66f35bcbbf 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -494,6 +494,8 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
riscv_cpu_register_gdb_regs_for_features(cs);
+ env->user_frequency = env->frequency;
+
qemu_init_vcpu(cs);
cpu_reset(cs);
@@ -531,6 +533,7 @@ static Property riscv_cpu_properties[] = {
DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true),
DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true),
DEFINE_PROP_UINT64("resetvec", RISCVCPU, cfg.resetvec, DEFAULT_RSTVEC),
+ DEFINE_PROP_UINT64("time-frequency", RISCVCPU, env.frequency, 0),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 16d6050ead..f5b6c34176 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -243,6 +243,8 @@ struct CPURISCVState {
uint64_t kvm_timer_time;
uint64_t kvm_timer_compare;
uint64_t kvm_timer_state;
+ uint64_t user_frequency;
+ uint64_t frequency;
};
OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
--
2.19.1
More information about the kvm-riscv
mailing list