[PATCH v1 2/2] powerpc: add support for Kexec HandOver (KHO)
Sourabh Jain
sourabhjain at linux.ibm.com
Mon Sep 28 01:32:26 PDT 2026
Add the architecture bits needed to enable CONFIG_KEXEC_HANDOVER on
powerpc.
Set ARCH_SUPPORTS_KEXEC_HANDOVER for PPC64.
On the boot path, check for KHO information in the device tree before
unflatten_device_tree(). This allows a kernel booted via KHO kexec to
recover the FDT and scratch region left by the previous kernel.
Move early_init_dt_check_kho() out of the device tree implementation
and call it from setup_arch() before the device tree is unflattened.
Note:
Crashkernel reservation impacts KHO scratch reservation. Crashkernel
memory is reserved first using memblock, and this memory is included
when calculating the KHO scratch size. As a result, a large crashkernel
reservation can increase the KHO scratch size and may cause the KHO
scratch reservation to fail.
This issue also exists on other architectures and will be handled
separately.
Cc: Aditya Gupta <adityag at linux.ibm.com>
Cc: Alexander Graf <graf at amazon.com>
Cc: Andrew Morton <akpm at linux-foundation.org>
Cc: Baoquan He <baoquan.he at linux.dev>
Cc: Christophe Leroy (CS GROUP) <chleroy at kernel.org>
Cc: Hari Bathini <hbathini at linux.ibm.com>
Cc: Madhavan Srinivasan <maddy at linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh at linux.ibm.com>
Cc: Michael Ellerman <mpe at ellerman.id.au>
Cc: Mike Rapoport <rppt at kernel.org>
Cc: Nicholas Piggin <npiggin at gmail.com>
Cc: Pasha Tatashin <pasha.tatashin at soleen.com>
Cc: Pratyush Yadav <pratyush at kernel.org>
Cc: Ritesh Harjani (IBM) <ritesh.list at gmail.com>
Cc: Shivang Upadhyay <shivangu at linux.ibm.com>
Cc: Shrikanth Hegde <sshegde at linux.ibm.com>
Cc: linux-kernel at vger.kernel.org
Cc: linuxppc-dev at lists.ozlabs.org
Signed-off-by: Sourabh Jain <sourabhjain at linux.ibm.com>
---
arch/powerpc/Kconfig | 3 +++
arch/powerpc/kernel/setup-common.c | 2 ++
drivers/of/fdt.c | 2 +-
include/linux/of_fdt.h | 1 +
4 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2580e27e4328..3517d74949d0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -716,6 +716,9 @@ config ARCH_SELECTS_CRASH_DUMP
depends on CRASH_DUMP
select RELOCATABLE if PPC64 || 44x || PPC_85xx
+config ARCH_SUPPORTS_KEXEC_HANDOVER
+ def_bool PPC64
+
config ARCH_SUPPORTS_CRASH_HOTPLUG
def_bool y
depends on PPC64
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 4afaba19b586..53c2f1897bfe 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -923,6 +923,8 @@ void __init setup_arch(char **cmdline_p)
/* Set a half-reasonable default so udelay does something sensible */
loops_per_jiffy = 500000000 / HZ;
+ early_init_dt_check_kho();
+
/* Unflatten the device-tree passed by prom_init or kexec */
unflatten_device_tree();
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index a64afc3ded3d..69e6ad868fa3 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -926,7 +926,7 @@ void __init early_init_dt_check_for_usable_mem_range(void)
/**
* early_init_dt_check_kho - Decode info required for kexec handover from DT
*/
-static void __init early_init_dt_check_kho(void)
+void __init early_init_dt_check_kho(void)
{
unsigned long node = chosen_node_offset;
u64 fdt_start, fdt_size, scratch_start, scratch_size;
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 51dadbaa3d63..5e9d6af0c7dd 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -83,6 +83,7 @@ extern int early_init_dt_scan_root(void);
extern bool early_init_dt_scan(void *dt_virt, phys_addr_t dt_phys);
extern bool early_init_dt_verify(void *dt_virt, phys_addr_t dt_phys);
extern void early_init_dt_scan_nodes(void);
+extern void early_init_dt_check_kho(void);
extern const char *of_flat_dt_get_machine_name(void);
extern const void *of_flat_dt_match_machine(const void *default_match,
--
2.55.0
More information about the kexec
mailing list