[PATCH v9 10/13] PCI: liveupdate: Adopt ARI Forwarding Enable on preserved bridges

David Matlack dmatlack at google.com
Fri Sep 18 13:06:36 PDT 2026


Adopt the ARI Forwarding Enable bit on preserved bridges and update
pci_dev->ari_enabled accordingly during a Live Update. This ensures that
the preserved devices on the bridge's secondary bus can be identified
with the same expanded 8-bit function number after a Live Update.

Reviewed-by: Bjorn Helgaas <bhelgaas at google.com>
Reviewed-by: Pranjal Shrivastava <praan at google.com>
Signed-off-by: David Matlack <dmatlack at google.com>
---
 drivers/pci/liveupdate.c | 30 ++++++++++++++++++++++++++++++
 drivers/pci/liveupdate.h |  6 ++++++
 drivers/pci/pci.c        |  8 +++++++-
 3 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/liveupdate.c b/drivers/pci/liveupdate.c
index 0145399b3834..3c9a10a892fc 100644
--- a/drivers/pci/liveupdate.c
+++ b/drivers/pci/liveupdate.c
@@ -189,6 +189,10 @@
  *    way after Live Update and ensures that IOMMU groups do not change. Note
  *    that a device will use its adopted ACS controls for the lifetime of its
  *    struct pci_dev (i.e. even after pci_liveupdate_finish()).
+ *
+ *  * The PCI core adopts ARI Forwarding Enable on all bridges with downstream
+ *    preserved devices to ensure that all preserved devices on the bridge's
+ *    secondary bus are addressable after the Live Update.
  */
 
 #define pr_fmt(fmt) "PCI: liveupdate: " fmt
@@ -904,6 +908,32 @@ int pci_liveupdate_adopt_acs(struct pci_dev *dev)
 	return 0;
 }
 
+/**
+ * pci_liveupdate_adopt_ari() - Adopt ARI configuration
+ * @dev: The PCI device to adopt ARI configuration for
+ *
+ * For devices preserved across a Live Update, read the ARI state from
+ * hardware and adopt it. This ensures the device continues to use the ARI
+ * configuration established by the previous kernel.
+ *
+ * Return: 0 on success, or -EINVAL if the device was not preserved.
+ */
+int pci_liveupdate_adopt_ari(struct pci_dev *dev)
+{
+	u16 val;
+
+	guard(rwsem_read)(&pci_liveupdate.rwsem);
+
+	if (!dev->liveupdate.incoming)
+		return -EINVAL;
+
+	pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &val);
+
+	/* Safe to modify dev->ari_enabled bitfield during enumeration. */
+	dev->ari_enabled = !!(val & PCI_EXP_DEVCTL2_ARI);
+	return 0;
+}
+
 /**
  * pci_liveupdate_is_incoming() - Check if a device is incoming-preserved
  * @dev: The PCI device to check
diff --git a/drivers/pci/liveupdate.h b/drivers/pci/liveupdate.h
index d4721ffcecb2..90b2754ecc0c 100644
--- a/drivers/pci/liveupdate.h
+++ b/drivers/pci/liveupdate.h
@@ -16,6 +16,7 @@ void pci_liveupdate_cleanup_device(struct pci_dev *dev);
 bool pci_liveupdate_preserve_bus_numbers(void);
 bool pci_liveupdate_refuse_bus_numbers(struct pci_bus *bus, struct pci_dev *dev);
 int pci_liveupdate_adopt_acs(struct pci_dev *dev);
+int pci_liveupdate_adopt_ari(struct pci_dev *dev);
 #else
 static inline void pci_liveupdate_setup_device(struct pci_dev *dev)
 {
@@ -40,6 +41,11 @@ static inline int pci_liveupdate_adopt_acs(struct pci_dev *dev)
 {
 	return -EINVAL;
 }
+
+static inline int pci_liveupdate_adopt_ari(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
 #endif
 
 #endif /* DRIVERS_PCI_LIVEUPDATE_H */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 47d8229115b8..0ae405b86b2f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3625,7 +3625,7 @@ void pci_configure_ari(struct pci_dev *dev)
 	u32 cap;
 	struct pci_dev *bridge;
 
-	if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
+	if (!pci_is_pcie(dev) || dev->devfn)
 		return;
 
 	bridge = dev->bus->self;
@@ -3636,6 +3636,12 @@ void pci_configure_ari(struct pci_dev *dev)
 	if (!(cap & PCI_EXP_DEVCAP2_ARI))
 		return;
 
+	if (!pci_liveupdate_adopt_ari(bridge))
+		return;
+
+	if (pcie_ari_disabled)
+		return;
+
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI)) {
 		pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
 					 PCI_EXP_DEVCTL2_ARI);
-- 
2.55.0.1082.g2b9226bbc0-goog




More information about the kexec mailing list