[PATCH v8 08/12] PCI: liveupdate: Adopt ACS controls in incoming preserved devices

Bjorn Helgaas helgaas at kernel.org
Thu Sep 10 16:51:49 PDT 2026


On Tue, Jul 28, 2026 at 10:10:02PM +0000, David Matlack wrote:
> Adopt Access Control Services (ACS) controls on all incoming preserved
> devices (endpoints and upstream bridges) during a Live Update.
> 
> Inheriting ACS flags avoids changing routing rules while memory
> transactions are in flight from preserved devices. This is also strictly
> necessary to ensure that IOMMU group assignments do not change during or
> after Live Update.
> 
> Cache the inherited ACS controls established by the previous kernel in
> struct pci_dev so that ACS controls do not change after a reset
> (pci_restore_state() calls pci_enable_acs()).
> 
> To simplify ACS inheritance, reject preserving any devices that require
> quirks to enable ACS as those quirks would also have to take Live Update
> into account.

> 
> Reviewed-by: Pasha Tatashin <pasha.tatashin at soleen.com>
> Signed-off-by: David Matlack <dmatlack at google.com>
> ---
>  drivers/pci/liveupdate.c       | 87 ++++++++++++++++++++++++++++++++++
>  drivers/pci/liveupdate.h       | 11 +++++
>  drivers/pci/pci.c              |  6 +++
>  drivers/pci/pci.h              |  5 ++
>  drivers/pci/quirks.c           |  7 +++
>  include/linux/pci_liveupdate.h |  6 +++
>  6 files changed, 122 insertions(+)
> 
> diff --git a/drivers/pci/liveupdate.c b/drivers/pci/liveupdate.c
> index 08e5ff8c1fe7..fb602dd3933e 100644
> --- a/drivers/pci/liveupdate.c
> +++ b/drivers/pci/liveupdate.c
> @@ -71,6 +71,9 @@
>   *
>   *  * The device cannot be a Virtual Function (VF).
>   *
> + *  * The device cannot require device-specific quirks to enable Access
> + *    Control Services (ACS).
> + *
>   * Driver Binding
>   * ==============
>   *
> @@ -113,6 +116,18 @@
>   * This enables the PCI core and any drivers bound to the bridge to participate
>   * in the Live Update so that preserved endpoints can continue issuing memory
>   * transactions during the Live Update.
> + *
> + * Handling Preserved Devices
> + * ==========================
> + *
> + * The PCI core treats preserved devices differently than non-preserved devices.
> + * This section enumerates those differences.
> + *
> + *  * The PCI core adopts all ACS controls enabled on incoming preserved devices
> + *    rather than assigning new ones. This ensures that TLPs are routed the same
> + *    way after Live Update and ensures that IOMMU groups do not change. Note
> + *    that a device will use its adopted ACS controls for the lifetime of its
> + *    struct pci_dev (i.e. even after pci_liveupdate_finish()).
>   */
>  
>  #define pr_fmt(fmt) "PCI: liveupdate: " fmt
> @@ -128,6 +143,7 @@
>  #include <linux/slab.h>
>  
>  #include "liveupdate.h"
> +#include "pci.h"
>  
>  /**
>   * struct pci_liveupdate_global - Global state for PCI Live Update support
> @@ -417,6 +433,16 @@ static int pci_liveupdate_preserve_device(struct pci_flb_outgoing *outgoing,
>  		return -EINVAL;
>  	}
>  
> +	/*
> +	 * Do not preserve devices that rely on device-specific ACS equivalents
> +	 * (for now) since that would complicate keeping ACS constant across
> +	 * Live Update.
> +	 */
> +	if (pci_need_dev_specific_enable_acs(dev)) {
> +		pci_warn(dev, "Refusing to preserve device that relies on ACS quirks\n");
> +		return -EINVAL;
> +	}
> +
>  	if (dev->liveupdate.outgoing) {
>  		if (!dev->liveupdate.outgoing->refcount) {
>  			pci_WARN(dev, 1, "Preserved device with 0 refcount!\n");
> @@ -668,6 +694,7 @@ void pci_liveupdate_setup_device(struct pci_dev *dev)
>  
>  	pci_info(dev, "Device was preserved by previous kernel across Live Update\n");
>  	dev->liveupdate.incoming = dev_ser;
> +	dev->liveupdate.was_preserved = true;
>  	pci_liveupdate_flb_put_incoming();
>  }
>  
> @@ -746,6 +773,66 @@ void pci_liveupdate_finish(struct pci_dev *dev)
>  }
>  EXPORT_SYMBOL_GPL(pci_liveupdate_finish);
>  
> +/**
> + * pci_liveupdate_cache_adopted_acs_controls() - Cache adopted ACS controls
> + * @dev: The PCI device to cache ACS controls from
> + *
> + * If @dev is an incoming Live Update device, read its current ACS configuration
> + * from hardware (which was set by the previous kernel) and cache it.
> + */
> +void pci_liveupdate_cache_adopted_acs_controls(struct pci_dev *dev)
> +{
> +	guard(rwsem_read)(&pci_liveupdate.rwsem);
> +
> +	if (!dev->liveupdate.incoming)
> +		return;
> +
> +	pci_read_config_word(dev, dev->acs_cap + PCI_ACS_CTRL, &dev->liveupdate.acs_ctrl);
> +}
> +
> +/**
> + * pci_liveupdate_enable_adopted_acs_controls() - Enable adopted ACS controls
> + * @dev: The PCI device to enable adopted ACS controls for
> + *
> + * For devices preserved across a Live Update, write the cached ACS controls
> + * back into the hardware's ACS Capability. This ensures that the device
> + * continues to use the ACS rules established by the previous kernel.
> + *
> + * Return: 0 on success, or -EINVAL if the device was not preserved or requires
> + * device-specific quirks.
> + */
> +int pci_liveupdate_enable_adopted_acs_controls(struct pci_dev *dev)
> +{
> +	u16 acs_ctrl = dev->liveupdate.acs_ctrl;
> +	u16 acs_cap = dev->acs_cap;
> +
> +	/*
> +	 * Check if the device was preserved over a previous Live Update (even
> +	 * if it has already gone through pci_liveupdate_finish()). This ensures
> +	 * that the device continues to use the ACS controls established by the
> +	 * previous kernel.
> +	 */
> +	if (!dev->liveupdate.was_preserved)
> +		return -EINVAL;
> +
> +	/*
> +	 * The previous kernel should not have preserved any devices that
> +	 * require device-specific quirks to enable ACS, but if such a device is
> +	 * detected (e.g. new device-specific ACS quirk in the current kernel),
> +	 * log a big warning and fall back to the normal enable ACS path.
> +	 */
> +	if (pci_need_dev_specific_enable_acs(dev)) {
> +		pci_warn(dev, "Device-specific quirk required to enable ACS!\n");
> +		WARN_ON_ONCE(true);
> +		return -EINVAL;
> +	}
> +
> +	if (acs_cap)
> +		pci_write_config_word(dev, acs_cap + PCI_ACS_CTRL, acs_ctrl);
> +
> +	return 0;
> +}
> +
>  /**
>   * pci_liveupdate_is_incoming() - Check if a device is incoming-preserved
>   * @dev: The PCI device to check
> diff --git a/drivers/pci/liveupdate.h b/drivers/pci/liveupdate.h
> index 107881183fda..ac5b8bf2edf5 100644
> --- a/drivers/pci/liveupdate.h
> +++ b/drivers/pci/liveupdate.h
> @@ -16,6 +16,8 @@ void pci_liveupdate_cleanup_device(struct pci_dev *dev);
>  bool pci_liveupdate_preserve_bus_numbers(struct pci_bus *bus,
>  					 struct pci_dev *dev);
>  void pci_liveupdate_scan_bridge_end(struct pci_dev *dev);
> +void pci_liveupdate_cache_adopted_acs_controls(struct pci_dev *dev);
> +int pci_liveupdate_enable_adopted_acs_controls(struct pci_dev *dev);
>  #else
>  static inline void pci_liveupdate_setup_device(struct pci_dev *dev)
>  {
> @@ -34,6 +36,15 @@ static inline bool pci_liveupdate_preserve_bus_numbers(struct pci_bus *bus,
>  static inline void pci_liveupdate_scan_bridge_end(struct pci_dev *dev)
>  {
>  }
> +
> +static inline void pci_liveupdate_cache_adopted_acs_controls(struct pci_dev *dev)
> +{
> +}
> +
> +static inline int pci_liveupdate_enable_adopted_acs_controls(struct pci_dev *dev)
> +{
> +	return -EINVAL;
> +}
>  #endif
>  
>  #endif /* DRIVERS_PCI_LIVEUPDATE_H */
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 77b17b13ee61..22001bdf4c97 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -34,6 +34,8 @@
>  #include <linux/aer.h>
>  #include <linux/bitfield.h>
>  #include <linux/suspend.h>
> +
> +#include "liveupdate.h"
>  #include "pci.h"
>  
>  DEFINE_MUTEX(pci_slot_mutex);
> @@ -1008,6 +1010,9 @@ void pci_enable_acs(struct pci_dev *dev)
>  	bool enable_acs = false;
>  	int pos;
>  
> +	if (!pci_liveupdate_enable_adopted_acs_controls(dev))
> +		return;

Ugh.  The asymmetry between pci_save_state(), which does nothing
ACS-related, and pci_restore_state(), which enables it, is sort of
sketchy to begin with.

The command-line parsing in this path feels like kind of a wart (not
that you're touching it).

It just seems like this path is already hard to analyze, and
liveupdate is making it harder.

If we could save/restore the ACS state around the reset, wouldn't that
solve this without any liveupdate specials here?

>  	/* If an iommu is present we start with kernel default caps */
>  	if (pci_acs_enable) {
>  		if (pci_dev_specific_enable_acs(dev))
> @@ -3689,6 +3694,7 @@ void pci_acs_init(struct pci_dev *dev)
>  
>  	pci_read_config_word(dev, pos + PCI_ACS_CAP, &dev->acs_capabilities);
>  	pci_disable_broken_acs_cap(dev);
> +	pci_liveupdate_cache_adopted_acs_controls(dev);
>  }
>  
>  /**
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 4469e1a77f3c..988a18b3204a 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -1047,6 +1047,7 @@ void pci_acs_init(struct pci_dev *dev);
>  void pci_enable_acs(struct pci_dev *dev);
>  #ifdef CONFIG_PCI_QUIRKS
>  int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
> +bool pci_need_dev_specific_enable_acs(struct pci_dev *dev);
>  int pci_dev_specific_enable_acs(struct pci_dev *dev);
>  int pci_dev_specific_disable_acs_redir(struct pci_dev *dev);
>  void pci_disable_broken_acs_cap(struct pci_dev *pdev);
> @@ -1057,6 +1058,10 @@ static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
>  {
>  	return -ENOTTY;
>  }
> +static inline bool pci_need_dev_specific_enable_acs(struct pci_dev *dev)
> +{
> +	return false;
> +}
>  static inline int pci_dev_specific_enable_acs(struct pci_dev *dev)
>  {
>  	return -ENOTTY;
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 7ac39ec2843e..99b819f38e49 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5473,6 +5473,13 @@ static const struct pci_dev_acs_ops *pci_dev_acs_ops_get(struct pci_dev *dev)
>  	return NULL;
>  }
>  
> +bool pci_need_dev_specific_enable_acs(struct pci_dev *dev)
> +{
> +	const struct pci_dev_acs_ops *p = pci_dev_acs_ops_get(dev);
> +
> +	return p && p->enable_acs;
> +}
> +
>  int pci_dev_specific_enable_acs(struct pci_dev *dev)
>  {
>  	const struct pci_dev_acs_ops *p = pci_dev_acs_ops_get(dev);
> diff --git a/include/linux/pci_liveupdate.h b/include/linux/pci_liveupdate.h
> index fc1f5640968a..04a2b2a3102a 100644
> --- a/include/linux/pci_liveupdate.h
> +++ b/include/linux/pci_liveupdate.h
> @@ -17,14 +17,20 @@
>   * struct pci_liveupdate - PCI Live Update state for a struct pci_dev
>   * @outgoing: State preserved for the next kernel.
>   * @incoming: State preserved by the previous kernel.
> + * @acs_ctrl: ACS features established by the previous kernel.
>   * @preserve_bus_numbers: True if the PCI core should preserve the secondary and
>   *                        subordinate bus numbers assigned to this device due to
>   *                        an ongoing Live Update.
> + * @was_preserved: True if this struct pci_dev was preserved by the previous
> + *                 kernel. Unlike @incoming, this field is not cleared after
> + *                 the device is finished participating in Live Update.
>   */
>  struct pci_liveupdate {
>  	struct pci_dev_ser *outgoing;
>  	struct pci_dev_ser *incoming;
> +	u16 acs_ctrl;
>  	bool preserve_bus_numbers;
> +	bool was_preserved;
>  };
>  
>  struct pci_dev;
> -- 
> 2.55.0.487.gaf234c4eb3-goog
> 



More information about the kexec mailing list