[PATCH] of/kexec: save pa of initial_boot_params for arm64 and use it at kexec

[Usama Arif]

 __pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence stash the physical address when it is known at
boot time and use it at kexec time instead of converting the virtual
address using __pa().

Reported-by: Breno Leitao <leitao at debian.org>
Suggested-by: Mark Rutland <mark.rutland at arm.com>
Signed-off-by: Usama Arif <usamaarif642 at gmail.com>
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
---
 arch/arm64/kernel/setup.c | 8 ++++++++
 drivers/of/fdt.c          | 6 ++++++
 drivers/of/kexec.c        | 8 ++++++--
 include/linux/of_fdt.h    | 2 ++
 4 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index b22d28ec8028..a4d96f5e2e05 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -194,6 +194,14 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 	/* Early fixups are done, map the FDT as read-only now */
 	fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL_RO);
 
+	/*
+	 * Save dt_phys address so that it can be used later for kexec. This
+	 * is done as __pa() is only intended to be used for linear map addresses
+	 * and using it for initial_boot_params which is in fixmap will give an
+	 * incorrect value.
+	 */
+	set_initial_boot_params_pa(dt_phys);
+
 	name = of_flat_dt_get_machine_name();
 	if (!name)
 		return;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 4d528c10df3a..9e312b7c246e 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -457,6 +457,7 @@ int __initdata dt_root_addr_cells;
 int __initdata dt_root_size_cells;
 
 void *initial_boot_params __ro_after_init;
+phys_addr_t initial_boot_params_pa __ro_after_init;
 
 #ifdef CONFIG_OF_EARLY_FLATTREE
 
@@ -1185,6 +1186,11 @@ bool __init early_init_dt_scan(void *params)
 	return true;
 }
 
+void __init set_initial_boot_params_pa(phys_addr_t params)
+{
+	initial_boot_params_pa = params;
+}
+
 static void *__init copy_device_tree(void *fdt)
 {
 	int size;
diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
index 9ccde2fd77cb..ca9f27b27f71 100644
--- a/drivers/of/kexec.c
+++ b/drivers/of/kexec.c
@@ -300,8 +300,12 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
 		goto out;
 	}
 
-	/* Remove memory reservation for the current device tree. */
-	ret = fdt_find_and_del_mem_rsv(fdt, __pa(initial_boot_params),
+	/* Remove memory reservation for the current device tree.
+	 * For arm64, initial_boot_params is a fixmap address, hence __pa(),
+	 * can't be used to get the physical address.
+	 */
+	ret = fdt_find_and_del_mem_rsv(fdt, IS_ENABLED(CONFIG_ARM64) ?
+				       initial_boot_params_pa : __pa(initial_boot_params),
 				       fdt_totalsize(initial_boot_params));
 	if (ret == -EINVAL) {
 		pr_err("Error removing memory reservation.\n");
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index d69ad5bb1eb1..dbd99bf21ac8 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -31,6 +31,7 @@ extern void *of_fdt_unflatten_tree(const unsigned long *blob,
 extern int __initdata dt_root_addr_cells;
 extern int __initdata dt_root_size_cells;
 extern void *initial_boot_params;
+extern phys_addr_t initial_boot_params_pa;
 
 extern char __dtb_start[];
 extern char __dtb_end[];
@@ -73,6 +74,7 @@ extern int early_init_dt_scan_root(void);
 extern bool early_init_dt_scan(void *params);
 extern bool early_init_dt_verify(void *params);
 extern void early_init_dt_scan_nodes(void);
+extern void set_initial_boot_params_pa(phys_addr_t params);
 
 extern const char *of_flat_dt_get_machine_name(void);
 extern const void *of_flat_dt_match_machine(const void *default_match,
-- 
2.43.5