[PATCH v9 12/19] reboot: Secure Launch SEXIT support on reboot paths

[Ross Philipson]

If the MLE kernel is being powered off, rebooted or halted,
then SEXIT must be called. Note that the SEXIT GETSEC leaf
can only be called after a machine_shutdown() has been done on
these paths. The machine_shutdown() is not called on a few paths
like when poweroff action does not have a poweroff callback (into
ACPI code) or when an emergency reset is done. In these cases,
just the TXT registers are finalized but SEXIT is skipped.

Signed-off-by: Ross Philipson <ross.philipson at oracle.com>
---
 arch/x86/kernel/reboot.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f3130f762784..66060fdb0822 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/objtool.h>
 #include <linux/pgtable.h>
+#include <linux/slaunch.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
@@ -766,6 +767,7 @@ static void native_machine_restart(char *__unused)
 
 	if (!reboot_force)
 		machine_shutdown();
+	slaunch_finalize(!reboot_force);
 	__machine_emergency_restart(0);
 }
 
@@ -776,6 +778,9 @@ static void native_machine_halt(void)
 
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 
+	/* SEXIT done after machine_shutdown() to meet TXT requirements */
+	slaunch_finalize(1);
+
 	stop_this_cpu(NULL);
 }
 
@@ -784,8 +789,12 @@ static void native_machine_power_off(void)
 	if (kernel_can_power_off()) {
 		if (!reboot_force)
 			machine_shutdown();
+		slaunch_finalize(!reboot_force);
 		do_kernel_power_off();
+	} else {
+		slaunch_finalize(0);
 	}
+
 	/* A fallback in case there is no PM info available */
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
@@ -813,6 +822,7 @@ void machine_shutdown(void)
 
 void machine_emergency_restart(void)
 {
+	slaunch_finalize(0);
 	__machine_emergency_restart(1);
 }
 
-- 
2.39.3