[PATCH v8 01/15] x86/boot: Place kernel_info at a fixed offset

[Daniel P. Smith]

Hi Ard!

On 2/15/24 02:56, Ard Biesheuvel wrote:
> On Wed, 14 Feb 2024 at 23:31, Ross Philipson <ross.philipson at oracle.com> wrote:
>>
>> From: Arvind Sankar <nivedita at alum.mit.edu>
>>
>> There are use cases for storing the offset of a symbol in kernel_info.
>> For example, the trenchboot series [0] needs to store the offset of the
>> Measured Launch Environment header in kernel_info.
>>
> 
> Why? Is this information consumed by the bootloader?

Yes, the bootloader needs a standardized means to find the offset of the 
MLE header, which communicates a set of meta-data needed by the DCE in 
order to set up for and start the loaded kernel. Arm will also need to 
provide a similar metadata structure and alternative entry point (or a 
complete rewrite of the existing entry point), as the current Arm entry 
point is in direct conflict with Arm DRTM specification.

> I'd like to get away from x86 specific hacks for boot code and boot
> images, so I would like to explore if we can avoid kernel_info, or at
> least expose it in a generic way. We might just add a 32-bit offset
> somewhere in the first 64 bytes of the bootable image: this could
> co-exist with EFI bootable images, and can be implemented on arm64,
> RISC-V and LoongArch as well.

With all due respect, I would not refer to boot params and the kern_info 
extension designed by the x86 maintainers as a hack. It is the 
well-defined boot protocol for x86, just as Arm has its own boot 
protocol around Device Tree.

We would gladly adopt a cross arch/cross image type, zImage and bzImage, 
means to embedded meta-data about the kernel that can be discovered by a 
bootloader. Otherwise, we are relegated to doing a per arch/per image 
type discovery mechanism. If you have any suggestions that are cross 
arch/cross image type that we could explore, we would be grateful and 
willing to investigate how to adopt such a method.

V/r,
Daniel