[PATCH v16 0/5] powerpc/crash: Kernel handling of CPU and memory hotplug
Sourabh Jain
sourabhjain at linux.ibm.com
Sat Feb 17 00:14:47 PST 2024
Commit 247262756121 ("crash: add generic infrastructure for crash
hotplug support") added a generic infrastructure that allows
architectures to selectively update the kdump image component during CPU
or memory add/remove events within the kernel itself.
This patch series adds crash hotplug handler for PowerPC and enable
support to update the kdump image on CPU/Memory add/remove events.
Among the 5 patches in this series, the first two patches make changes
to the generic crash hotplug handler to assist PowerPC in adding support
for this feature. The last three patches add support for this feature.
The following section outlines the problem addressed by this patch
series, along with the current solution, its shortcomings, and the
proposed resolution.
Problem:
========
Due to CPU/Memory hotplug or online/offline events the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.
Going forward CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.
Existing solution and its shortcoming:
======================================
The current solution to address the above issue involves monitoring the
CPU/memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.
Proposed solution:
==================
Instead of initiating a full kdump image reload from userspace on
CPU/Memory hotplug and online/offline events, the proposed solution aims
to update only the necessary kdump image component within the kernel
itself.
Git tree for testing:
=====================
Git tree rebased on top of v6.8-rc4:
https://github.com/sourabhjains/linux/tree/kdump-in-kernel-crash-update-v16
To realize this feature, the kdump udev rule must be updated. On RHEL,
add the following two lines at the top of the
"/usr/lib/udev/rules.d/98-kexec.rules" file.
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
With the above change to the kdump udev rule, kdump reload is avoided
during CPU/Memory add/remove events if this feature is enabled in the
kernel.
Note: only kexec_file_load syscall will work. For kexec_load minor changes
are required in kexec tool.
Changelog:
----------
v16:
- Remove the unused #define `crash_hotplug_cpu_support`
and `crash_hotplug_memory_support` in `arch/x86/include/asm/kexec.h`.
- Document why two kexec flag bits are used in
`arch_crash_hotplug_memory_support` (x86).
- Use a switch case to handle different hotplug operations
in `arch_crash_handle_hotplug_event` for PowerPC.
- Fix a typo in 4/5.
v15:
- Remove the patch that adds a new kexec flag for FDT update.
- Introduce a generic kexec flag bit to share hotplug support
intent between the kexec tool and the kernel for the kexec_load
syscall. (2/5)
- Introduce an architecture-specific handler to process the kexec
flag for crash hotplug support. (2/5)
- Rename the @update_elfcorehdr member of the struct kimage to
@hotplug_support. (2/5)
- Use a common function to advertise hotplug support for both CPU
and Memory. (2/5)
v14:
- Fix build warnings by including necessary header files
- Rebase to v6.7-rc5
v13:
- Fix a build warning, take ranges.c out of CONFIG_KEXEC_FILE
- Rebase to v6.7-rc4
v12:
- A patch to add new kexec flags to support this feature on kexec_load
system call
- Change in the way this feature is advertise to userspace for both
kexec_load syscall
- Rebase to v6.6-rc7
v11:
- Rebase to v6.4-rc6
- The patch that introduced CONFIG_CRASH_HOTPLUG for PowerPC has been
removed. The config is now part of common configuration:
https://lore.kernel.org/all/87ilbpflsk.fsf@mail.lhotse/
v10:
- Drop the patch that adds fdt_index attribute to struct kimage_arch
Find the fdt segment index when needed.
- Added more details into commits messages.
- Rebased onto 6.3.0-rc5
v9:
- Removed patch to prepare elfcorehdr crash notes for possible CPUs.
The patch is moved to generic patch series that introduces generic
infrastructure for in kernel crash update.
- Removed patch to pass the hotplug action type to the arch crash
hotplug handler function. The generic patch series has introduced
the hotplug action type in kimage struct.
- Add detail commit message for better understanding.
v8:
- Restrict fdt_index initialization to machine_kexec_post_load
it work for both kexec_load and kexec_file_load.[3/8] Laurent Dufour
- Updated the logic to find the number of offline core. [6/8]
- Changed the logic to find the elfcore program header to accommodate
future memory ranges due memory hotplug events. [8/8]
v7
- added a new config to configure this feature
- pass hotplug action type to arch specific handler
v6
- Added crash memory hotplug support
v5:
- Replace COFNIG_CRASH_HOTPLUG with CONFIG_HOTPLUG_CPU.
- Move fdt segment identification for kexec_load case to load path
instead of crash hotplug handler
- Keep new attribute defined under kimage_arch to track FDT segment
under CONFIG_HOTPLUG_CPU config.
v4:
- Update the logic to find the additional space needed for hotadd CPUs
post kexec load. Refer "[RFC v4 PATCH 4/5] powerpc/crash hp: add crash
hotplug support for kexec_file_load" patch to know more about the
change.
- Fix a couple of typo.
- Replace pr_err to pr_info_once to warn user about memory hotplug
support.
- In crash hotplug handle exit the for loop if FDT segment is found.
v3
- Move fdt_index and fdt_index_vaild variables to kimage_arch struct.
- Rebase patche on top of
https://lore.kernel.org/lkml/20220303162725.49640-1-eric.devolder@oracle.com/
- Fixed warning reported by checpatch script
v2:
- Use generic hotplug handler introduced by
https://lore.kernel.org/lkml/20220209195706.51522-1-eric.devolder@oracle.com/
a significant change from v1.
Cc: Akhil Raj <lf32.dev at gmail.com>
Cc: Andrew Morton <akpm at linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar at kernel.org>
Cc: Baoquan He <bhe at redhat.com>
Cc: Borislav Petkov (AMD) <bp at alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky at oracle.com>
Cc: Christophe Leroy <christophe.leroy at csgroup.eu>
Cc: Dave Hansen <dave.hansen at linux.intel.com>
Cc: Dave Young <dyoung at redhat.com>
Cc: David Hildenbrand <david at redhat.com>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: Hari Bathini <hbathini at linux.ibm.com>
Cc: Laurent Dufour <laurent.dufour at fr.ibm.com>
Cc: Mahesh Salgaonkar <mahesh at linux.ibm.com>
Cc: Michael Ellerman <mpe at ellerman.id.au>
Cc: Mimi Zohar <zohar at linux.ibm.com>
Cc: Naveen N Rao <naveen at kernel.org>
Cc: Oscar Salvador <osalvador at suse.de>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Valentin Schneider <vschneid at redhat.com>
Cc: Vivek Goyal <vgoyal at redhat.com>
Cc: kexec at lists.infradead.org
Cc: x86 at kernel.org
Sourabh Jain (5):
crash: forward memory_notify arg to arch crash hotplug handler
crash: add a new kexec flag for hotplug support
powerpc/kexec: turn some static helper functions public
powerpc: add crash CPU hotplug support
powerpc: add crash memory hotplug support
arch/powerpc/Kconfig | 4 +
arch/powerpc/include/asm/kexec.h | 15 +
arch/powerpc/include/asm/kexec_ranges.h | 1 +
arch/powerpc/kexec/Makefile | 4 +-
arch/powerpc/kexec/core_64.c | 362 ++++++++++++++++++++++++
arch/powerpc/kexec/elf_64.c | 12 +-
arch/powerpc/kexec/file_load_64.c | 211 ++++----------
arch/powerpc/kexec/ranges.c | 85 ++++++
arch/x86/include/asm/kexec.h | 13 +-
arch/x86/kernel/crash.c | 31 +-
drivers/base/cpu.c | 2 +-
drivers/base/memory.c | 2 +-
include/linux/kexec.h | 29 +-
include/uapi/linux/kexec.h | 1 +
kernel/crash_core.c | 25 +-
kernel/kexec.c | 4 +-
kernel/kexec_file.c | 5 +
17 files changed, 589 insertions(+), 217 deletions(-)
--
2.43.0
More information about the kexec
mailing list