[PATCH v8 01/15] x86/boot: Place kernel_info at a fixed offset

[Daniel Kiper]

On Thu, Feb 15, 2024 at 08:56:25AM +0100, Ard Biesheuvel wrote:
> On Wed, 14 Feb 2024 at 23:31, Ross Philipson <ross.philipson at oracle.com> wrote:
> >
> > From: Arvind Sankar <nivedita at alum.mit.edu>
> >
> > There are use cases for storing the offset of a symbol in kernel_info.
> > For example, the trenchboot series [0] needs to store the offset of the
> > Measured Launch Environment header in kernel_info.
> >
>
> Why? Is this information consumed by the bootloader?

The bootloader stuffs this info, plus some offset IIRC, into special structure
and finally it is consumed by SINIT ACM after GETSEC[SENTER] call.

Sadly this data is Intel specific and it is even not compatible with AMD.
So, if I am not mistaken, we will need additional member for the AMD in
the kernel_info.

> I'd like to get away from x86 specific hacks for boot code and boot
> images, so I would like to explore if we can avoid kernel_info, or at
> least expose it in a generic way. We might just add a 32-bit offset
> somewhere in the first 64 bytes of the bootable image: this could
> co-exist with EFI bootable images, and can be implemented on arm64,
> RISC-V and LoongArch as well.

The other architectures may or may not have need for such data due to
differences in DRTM implementation. Anyway, whatever we do I want to
be sure the DRTM can be used on UEFI and non-UEFI platforms. So, I am
not entirely convinced the address/pointer to additional DRTM data
should be part of the MS-DOS and/or PE header. Though I am not against
building something generic shared among various architectures either.

Daniel