[PATCH V4 1/2] RISC-V: Add arch_crash_save_vmcoreinfo support

[Xianting Tian]

在 2022/10/20 上午10:08, Baoquan He 写道:
> On 10/19/22 at 06:36pm, Xianting Tian wrote:
>> Add arch_crash_save_vmcoreinfo(), which exports VM layout(MODULES, VMALLOC,
>> VMEMMAP ranges and KERNEL_LINK_ADDR), va bits and ram base for vmcore.
>>
>> Default pagetable levels and PAGE_OFFSET aren't same for different kernel
>> version as below. For pagetable levels, it sets sv57 by default and falls
>> back to setting sv48 at boot time if sv57 is not supported by the hardware.
>>
>> For ram base, the default value is 0x80200000 for qemu riscv64 env and,
>> for example, is 0x200000 on the XuanTie 910 CPU.
>>
>>   * Linux Kernel 5.18 ~
>>   *      PGTABLE_LEVELS = 5
>>   *      PAGE_OFFSET = 0xff60000000000000
>>   * Linux Kernel 5.17 ~
>>   *      PGTABLE_LEVELS = 4
>>   *      PAGE_OFFSET = 0xffffaf8000000000
>>   * Linux Kernel 4.19 ~
>>   *      PGTABLE_LEVELS = 3
>>   *      PAGE_OFFSET = 0xffffffe000000000
>>
>> Since these configurations change from time to time and version to version,
>> it is preferable to export them via vmcoreinfo than to change the crash's
>> code frequently, it can simplify the development of crash tool.
>>
>> Signed-off-by: Xianting Tian <xianting.tian at linux.alibaba.com>
>> ---
>>   arch/riscv/kernel/Makefile     |  1 +
>>   arch/riscv/kernel/crash_core.c | 23 +++++++++++++++++++++++
>>   2 files changed, 24 insertions(+)
>>   create mode 100644 arch/riscv/kernel/crash_core.c
>>
>> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
>> index db6e4b1294ba..4cf303a779ab 100644
>> --- a/arch/riscv/kernel/Makefile
>> +++ b/arch/riscv/kernel/Makefile
>> @@ -81,6 +81,7 @@ obj-$(CONFIG_KGDB)		+= kgdb.o
>>   obj-$(CONFIG_KEXEC_CORE)	+= kexec_relocate.o crash_save_regs.o machine_kexec.o
>>   obj-$(CONFIG_KEXEC_FILE)	+= elf_kexec.o machine_kexec_file.o
>>   obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
>> +obj-$(CONFIG_CRASH_CORE)	+= crash_core.o
>>   
>>   obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
>>   
>> diff --git a/arch/riscv/kernel/crash_core.c b/arch/riscv/kernel/crash_core.c
>> new file mode 100644
>> index 000000000000..3e889d0ed7bd
>> --- /dev/null
>> +++ b/arch/riscv/kernel/crash_core.c
>> @@ -0,0 +1,23 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +
>> +#include <linux/crash_core.h>
>> +#include <linux/pagemap.h>
>> +
>> +void arch_crash_save_vmcoreinfo(void)
>> +{
>> +	VMCOREINFO_NUMBER(VA_BITS);
>> +	VMCOREINFO_NUMBER(phys_ram_base);
>> +
>> +	vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n", PAGE_OFFSET);
>> +	vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
>> +	vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
>> +	vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
>> +	vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
>> +#ifdef CONFIG_64BIT
>> +	vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
>> +	vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
>> +#endif
>> +
>> +	if (IS_ENABLED(CONFIG_64BIT))
>> +		vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR);
> Wondering why you don't put KERNEL_LINK_ADDR exporting into the above
> ifdeffery scope, with that you can save one line of "IS_ENABLED(CONFIG_64BIT)".
I followed the rule in print_vm_layout() of arch/riscv/mm/init.c, which 
used IS_ENABLED when print the value of KERNEL_LINK_ADDR.