[PATCH V2 1/2] RISC-V: Add arch_crash_save_vmcoreinfo support

[Xianting Tian]

Add arch_crash_save_vmcoreinfo(), which exports VM layout(MODULES, VMALLOC,
VMEMMAP and KERNEL_LINK_ADDR ranges), va bits and ram base for vmcore.

Default pagetable levels and PAGE_OFFSET aren't same for different kernel
version as below. For default pagetable levels, it sets sv57 on defaultly
in latest kernel and do fallback to try to set sv48 on boot time if sv57
is not supported in current hardware.

For ram base, the default value is 0x80200000 for qemu riscv64 env, 0x200000
for riscv64 SoC platform(eg, SoC platform of RISC-V XuanTie 910 CPU).

 * Linux Kernel 5.18 ~
 *      PGTABLE_LEVELS = 5
 *      PAGE_OFFSET = 0xff60000000000000
 * Linux Kernel 5.17 ~
 *      PGTABLE_LEVELS = 4
 *      PAGE_OFFSET = 0xffffaf8000000000
 * Linux Kernel 4.19 ~
 *      PGTABLE_LEVELS = 3
 *      PAGE_OFFSET = 0xffffffe000000000

Since these configurations change from time to time and version to version,
it is preferable to export them via vmcoreinfo than to change the crash's
code frequently, it can simplify the development of crash tool.

Signed-off-by: Xianting Tian <xianting.tian at linux.alibaba.com>
---
 arch/riscv/kernel/Makefile     |  1 +
 arch/riscv/kernel/crash_core.c | 29 +++++++++++++++++++++++++++++
 2 files changed, 30 insertions(+)
 create mode 100644 arch/riscv/kernel/crash_core.c

diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index db6e4b1294ba..4cf303a779ab 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_KEXEC_CORE)	+= kexec_relocate.o crash_save_regs.o machine_kexec.o
 obj-$(CONFIG_KEXEC_FILE)	+= elf_kexec.o machine_kexec_file.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_CRASH_CORE)	+= crash_core.o
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
diff --git a/arch/riscv/kernel/crash_core.c b/arch/riscv/kernel/crash_core.c
new file mode 100644
index 000000000000..8d7f5ff108da
--- /dev/null
+++ b/arch/riscv/kernel/crash_core.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/crash_core.h>
+#include <linux/pagemap.h>
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	VMCOREINFO_NUMBER(VA_BITS);
+	VMCOREINFO_NUMBER(phys_ram_base);
+
+	vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n", PAGE_OFFSET);
+	vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
+	vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
+	vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
+	vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
+#ifdef CONFIG_64BIT
+	vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
+	vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
+#endif
+
+	if (IS_ENABLED(CONFIG_64BIT)) {
+#ifdef CONFIG_KASAN
+		vmcoreinfo_append_str("NUMBER(KASAN_SHADOW_START)=0x%lx\n", KASAN_SHADOW_START);
+		vmcoreinfo_append_str("NUMBER(KASAN_SHADOW_END)=0x%lx\n", KASAN_SHADOW_END);
+#endif
+		vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR);
+		vmcoreinfo_append_str("NUMBER(ADDRESS_SPACE_END)=0x%lx\n", ADDRESS_SPACE_END);
+	}
+}
-- 
2.17.1