[PATCH v7 4/8] crash: add generic infrastructure for crash hotplug support
Eric DeVolder
eric.devolder at oracle.com
Wed May 4 11:11:04 PDT 2022
On 4/28/22 00:18, Sourabh Jain wrote:
> Hi Baoquan,
>
> On 26/04/22 10:52, Baoquan He wrote:
>> On 04/26/22 at 09:36am, Sourabh Jain wrote:
>>> On 15/04/22 03:59, Eric DeVolder wrote:
>>>> Hi Baoquan,
>>>> Inline comments below.
>>>> Thanks!
>>>> eric
>>>>
>>>> On 4/13/22 21:45, Baoquan He wrote:
>>>>> On 04/13/22 at 12:42pm, Eric DeVolder wrote:
>>>>>> Upon CPU and memory changes, a generic crash_hotplug_handler()
>>>>>> dispatches the hot plug/unplug event to the architecture specific
>>>>>> arch_crash_hotplug_handler(). During the process, the kexec_mutex
>>>>>> is held.
>>>>>>
>>>>>> To support cpu hotplug, a callback is registered to capture the
>>>>>> CPUHP_AP_ONLINE_DYN online and ofline events via
>>>>>> cpuhp_setup_state_nocalls().
>>>>>>
>>>>>> To support memory hotplug, a notifier is registered to capture the
>>>>>> MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier().
>>>>>>
>>>>>> The cpu callback and memory notifier then call crash_hotplug_handler()
>>>>>> to handle the hot plug/unplug event.
>>>>>>
>>>>>> Signed-off-by: Eric DeVolder <eric.devolder at oracle.com>
>>>>>> ---
>>>>>> include/linux/kexec.h | 16 +++++++
>>>>>> kernel/crash_core.c | 101
>>>>>> ++++++++++++++++++++++++++++++++++++++++++
>>>>>> 2 files changed, 117 insertions(+)
>>>>>>
>>>>>> diff --git a/include/linux/kexec.h b/include/linux/kexec.h
>>>>>> index f93f2591fc1e..02daff1f47dd 100644
>>>>>> --- a/include/linux/kexec.h
>>>>>> +++ b/include/linux/kexec.h
>>>>>> @@ -306,6 +306,13 @@ struct kimage {
>>>>>> /* Information for loading purgatory */
>>>>>> struct purgatory_info purgatory_info;
>>>>>> +
>>>>>> +#ifdef CONFIG_CRASH_HOTPLUG
>>>>>> + bool hotplug_event;
>>>>>> + unsigned int offlinecpu;
>>>>>> + bool elfcorehdr_index_valid;
>>>>>> + int elfcorehdr_index;
>>>>>> +#endif
>>>>>> #endif
>>>>>> #ifdef CONFIG_IMA_KEXEC
>>>>>> @@ -322,6 +329,15 @@ struct kimage {
>>>>>> unsigned long elf_load_addr;
>>>>>> };
>>>>>> +#ifdef CONFIG_CRASH_HOTPLUG
>>>>>> +void arch_crash_hotplug_handler(struct kimage *image,
>>>>>> + unsigned int hp_action, unsigned int cpu);
>>>>>> +#define KEXEC_CRASH_HP_REMOVE_CPU 0
>>>>>> +#define KEXEC_CRASH_HP_ADD_CPU 1
>>>>>> +#define KEXEC_CRASH_HP_REMOVE_MEMORY 2
>>>>>> +#define KEXEC_CRASH_HP_ADD_MEMORY 3
>>>>>> +#endif /* CONFIG_CRASH_HOTPLUG */
>>>>>> +
>>>>>> /* kexec interface functions */
>>>>>> extern void machine_kexec(struct kimage *image);
>>>>>> extern int machine_kexec_prepare(struct kimage *image);
>>>>>> diff --git a/kernel/crash_core.c b/kernel/crash_core.c
>>>>>> index 256cf6db573c..ecf746243ab2 100644
>>>>>> --- a/kernel/crash_core.c
>>>>>> +++ b/kernel/crash_core.c
>>>>>> @@ -9,12 +9,17 @@
>>>>>> #include <linux/init.h>
>>>>>> #include <linux/utsname.h>
>>>>>> #include <linux/vmalloc.h>
>>>>>> +#include <linux/highmem.h>
>>>>>> +#include <linux/memory.h>
>>>>>> +#include <linux/cpuhotplug.h>
>>>>>> #include <asm/page.h>
>>>>>> #include <asm/sections.h>
>>>>>> #include <crypto/sha1.h>
>>>>>> +#include "kexec_internal.h"
>>>>>> +
>>>>>> /* vmcoreinfo stuff */
>>>>>> unsigned char *vmcoreinfo_data;
>>>>>> size_t vmcoreinfo_size;
>>>>>> @@ -491,3 +496,99 @@ static int __init crash_save_vmcoreinfo_init(void)
>>>>>> }
>>>>>> subsys_initcall(crash_save_vmcoreinfo_init);
>>>>>> +
>>>>>> +#ifdef CONFIG_CRASH_HOTPLUG
>>>>>> +void __weak arch_crash_hotplug_handler(struct kimage *image,
>>>>>> + unsigned int hp_action, unsigned int cpu)
>>>>>> +{
>>>>>> + pr_warn("crash hp: %s not implemented", __func__);
>>>>>> +}
>>>>>> +
>>>>>> +static void crash_hotplug_handler(unsigned int hp_action,
>>>>>> + unsigned int cpu)
>>>>>> +{
>>>>>> + /* Obtain lock while changing crash information */
>>>>>> + if (!mutex_trylock(&kexec_mutex))
>>>>>> + return;
>>>>>> +
>>>>>> + /* Check kdump is loaded */
>>>>>> + if (kexec_crash_image) {
>>>>>> + pr_debug("crash hp: hp_action %u, cpu %u", hp_action, cpu);
>>>>>> +
>>>>>> + /* Needed in order for the segments to be updated */
>>>>>> + arch_kexec_unprotect_crashkres();
>>>>>> +
>>>>>> + /* Flag to differentiate between normal load and hotplug */
>>>>>> + kexec_crash_image->hotplug_event = true;
>>>>>> +
>>>>>> + /* Now invoke arch-specific update handler */
>>>>>> + arch_crash_hotplug_handler(kexec_crash_image, hp_action, cpu);
>>>>>> +
>>>>>> + /* No longer handling a hotplug event */
>>>>>> + kexec_crash_image->hotplug_event = false;
>>>>>> +
>>>>>> + /* Change back to read-only */
>>>>>> + arch_kexec_protect_crashkres();
>>>>>> + }
>>>>>> +
>>>>>> + /* Release lock now that update complete */
>>>>>> + mutex_unlock(&kexec_mutex);
>>>>>> +}
>>>>>> +
>>>>>> +#if defined(CONFIG_MEMORY_HOTPLUG)
>>>>>> +static int crash_memhp_notifier(struct notifier_block *nb,
>>>>>> + unsigned long val, void *v)
>>>>>> +{
>>>>>> + struct memory_notify *mhp = v;
>>>>>> +
>>>>>> + switch (val) {
>>>>>> + case MEM_ONLINE:
>>>>>> + crash_hotplug_handler(KEXEC_CRASH_HP_ADD_MEMORY, -1U);
>>>>> We don't differentiate the memory add/remove, cpu add, except of cpu
>>>>> remove. Means the hp_action only differentiate cpu remove from the other
>>>>> action. Maybe only making two types?
>>>>>
>>>>> #define KEXEC_CRASH_HP_REMOVE_CPU 0
>>>>> #define KEXEC_CRASH_HP_UPDATE_OTHER 1
>>>>>
>>>> Sourabh Jain's work with PPC uses REMOVE_CPU, REMOVE_MEMORY, and
>>>> ADD_MEMORY.
>>>> Do you still want to consolidate these?
>>> On PowerPC different actions are needed for CPU add and memory add/remove.
>>> For CPU add case only FDT is updated whereas for the memory hotplug we will
>>> be
>>> updating FDT and elfcorehdr.
>> I don't understand. For elfcorehdr updating, we only need regenerate it.
>> Do you update them different for memory add/remove?
>
> We have different actions for cpu remove, CPU add and memory add/remove case.
>
> CPU remove: no action
> CPU add: update flattened device tree (FDT)
> memory add/remove: update FDT and regenerate/update elfcorehdr
>
> Since memory add/remove action is same we can have common hp_action for them.
>
>>
>> What I saw is the added action for memory hotplug is only for message
>> printing. Is this really needed? And memory hotplug is even not
>> supported. Please correct me if I missed anything.
>
> I agree that currently memory hp_action is only used for printing warning message but
> eventually we will be handling memory hotplug case as well.
Baoquan,
It appears the straight forward thing to do here is just to keep the 4 cpu/mem add/remove
combinations. It appears there is value in keeping them as currently defined. However, please
indicate if you agree or not.
Thanks!
Eric
>
>> + /* crash update on memory hotplug is not support yet */
>> + if (hp_action == KEXEC_CRASH_HP_REMOVE_MEMORY || hp_action == KEXEC_CRASH_HP_ADD_MEMORY) {
>> + pr_info_once("crash hp: crash update is not supported with memory hotplug\n");
>> + return;
>> + }
>
> Thanks,
> Sourabh Jain
>
More information about the kexec
mailing list