[PATCH v4 09/10] crash hp: Add x86 crash hotplug support for kexec_file_load

Eric DeVolder eric.devolder at oracle.com
Tue Mar 1 12:12:01 PST 2022



On 2/22/22 22:10, Baoquan He wrote:
> On 02/09/22 at 02:57pm, Eric DeVolder wrote:
>> For x86_64, when CPU or memory is hot un/plugged, the crash
>> elfcorehdr, which describes the CPUs and memory in the system,
>> must also be updated.
> 
> Please mark the patch as X86 related by adding:
> 
> x86/kexec: Add x86 crash hotplug support for kexec_file_load
Done!
> 
> And also update other subject to reflect under which component the
> changes are made, crash hp is the feature name.
Here's what I have at the moment, is this matching expectation?

pick 891fcff41a8f crash: fix minor typo/bug in debug message
pick 8f44e0d695be crash hp: Introduce CRASH_HOTPLUG configuration options
pick bae60e9db6ad crash: prototype change for crash_prepare_elf64_headers
pick cb98d1d923c8 crash: generic crash hotplug support infrastructure
pick 40e4434abad4 kexec: exclude elfcorehdr from the segment digest
pick 75039922aedc kexec: exclude hot remove cpu from elfcorehdr notes
pick 0be483dadeb8 x86/kexec: Add x86 crash hotplug support for kexec_file_load
pick 388bb5e4bf9a x86/kexec: Add x86 crash hotplug support for kexec_load

> 
> Otherwise, this looks good to me.
Thanks!
eric

> 
>>
>> To update the elfcorehdr for x86_64, a new elfcorehdr must be
>> generated from the available CPUs and memory. The new elfcorehdr
>> is prepared into a buffer, and if no errors occur, it is
>> installed over the top of the existing elfcorehdr.
>>
>> In the patch 'crash hp: exclude elfcorehdr from the segment digest'
>> the need to update purgatory due to the change in elfcorehdr was
>> eliminated.  As a result, no changes to purgatory or boot_params
>> (as the elfcorehdr= kernel command line parameter pointer
>> remains unchanged and correct) are needed, just elfcorehdr.
>>
>> To accommodate a growing number of resources via hotplug, the
>> elfcorehdr segment must be sufficiently large enough to accommodate
>> changes, see the CRASH_HOTPLUG_ELFCOREHDR_SZ configure item.
>>
>> With this change, the kexec_file_load syscall (not kexec_load)
>> is supported. When loading the crash kernel via kexec_file_load,
>> the elfcorehdr is identified at load time in crash_load_segments().
>>
>> Signed-off-by: Eric DeVolder <eric.devolder at oracle.com>
>> ---
>>   arch/x86/kernel/crash.c | 92 +++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 92 insertions(+)
>>
>> diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
>> index 9db41cce8d97..6215c51919db 100644
>> --- a/arch/x86/kernel/crash.c
>> +++ b/arch/x86/kernel/crash.c
>> @@ -25,6 +25,7 @@
>>   #include <linux/slab.h>
>>   #include <linux/vmalloc.h>
>>   #include <linux/memblock.h>
>> +#include <linux/highmem.h>
>>   
>>   #include <asm/processor.h>
>>   #include <asm/hardirq.h>
>> @@ -398,7 +399,17 @@ int crash_load_segments(struct kimage *image)
>>   	image->elf_headers = kbuf.buffer;
>>   	image->elf_headers_sz = kbuf.bufsz;
>>   
>> +#ifdef CONFIG_CRASH_HOTPLUG
>> +	/* Ensure elfcorehdr segment large enough for hotplug changes */
>> +	kbuf.memsz = CONFIG_CRASH_HOTPLUG_ELFCOREHDR_SZ;
>> +	/* For marking as usable to crash kernel */
>> +	image->elf_headers_sz = kbuf.memsz;
>> +	/* Record the index of the elfcorehdr segment */
>> +	image->elf_index = image->nr_segments;
>> +	image->elf_index_valid = true;
>> +#else
>>   	kbuf.memsz = kbuf.bufsz;
>> +#endif
>>   	kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
>>   	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
>>   	ret = kexec_add_buffer(&kbuf);
>> @@ -413,3 +424,84 @@ int crash_load_segments(struct kimage *image)
>>   	return ret;
>>   }
>>   #endif /* CONFIG_KEXEC_FILE */
>> +
>> +#ifdef CONFIG_CRASH_HOTPLUG
>> +/**
>> + * arch_crash_hotplug_handler() - Handle hotplug elfcorehdr changes
>> + * @image: the active struct kimage
>> + * @hp_action: the hot un/plug action being handled
>> + * @a: first parameter dependent upon hp_action
>> + * @b: first parameter dependent upon hp_action
>> + *
>> + * To accurately reflect hot un/plug changes, the elfcorehdr (which
>> + * is passed to the crash kernel via the elfcorehdr= parameter)
>> + * must be updated with the new list of CPUs and memories. The new
>> + * elfcorehdr is prepared in a kernel buffer, and if no errors,
>> + * then it is written on top of the existing/old elfcorehdr.
>> + *
>> + * For hotplug changes to elfcorehdr to work, two conditions are
>> + * needed:
>> + * First, the segment containing the elfcorehdr must be large enough
>> + * to permit a growing number of resources. See
>> + * CONFIG_CRASH_HOTPLUG_ELFCOREHDR_SZ.
>> + * Second, purgatory must explicitly exclude the elfcorehdr from the
>> + * list of segments it checks (since the elfcorehdr changes and thus
>> + * would require an update to purgatory itself to update the digest).
>> + *
>> + */
>> +void arch_crash_hotplug_handler(struct kimage *image,
>> +	unsigned int hp_action, unsigned long a, unsigned long b)
>> +{
>> +	struct kexec_segment *ksegment;
>> +	unsigned char *ptr = NULL;
>> +	unsigned long elfsz = 0;
>> +	void *elfbuf = NULL;
>> +	unsigned long mem, memsz;
>> +
>> +	/* Must have valid elfcorehdr index */
>> +	if (!image->elf_index_valid) {
>> +		pr_err("crash hp: unable to locate elfcorehdr segment");
>> +		goto out;
>> +	}
>> +
>> +	ksegment = &image->segment[image->elf_index];
>> +	mem = ksegment->mem;
>> +	memsz = ksegment->memsz;
>> +
>> +	/*
>> +	 * Create the new elfcorehdr reflecting the changes to CPU and/or
>> +	 * memory resources. The elfcorehdr segment memsz must be
>> +	 * sufficiently large to accommodate increases due to hotplug
>> +	 * activity. See CRASH_HOTPLUG_ELFCOREHDR_SZ.
>> +	 */
>> +	if (prepare_elf_headers(image, &elfbuf, &elfsz)) {
>> +		pr_err("crash hp: unable to prepare elfcore headers");
>> +		goto out;
>> +	}
>> +	if (elfsz > memsz) {
>> +		pr_err("crash hp: update elfcorehdr elfsz %lu > memsz %lu",
>> +			elfsz, memsz);
>> +		goto out;
>> +	}
>> +
>> +	/*
>> +	 * At this point, we are all but assured of success.
>> +	 * Copy new elfcorehdr into destination.
>> +	 */
>> +	ptr = map_crash_pages(mem, memsz);
>> +	if (ptr) {
>> +		/* Temporarily invalidate the crash image while it is replaced */
>> +		xchg(&kexec_crash_image, NULL);
>> +		/* Write the new elfcorehdr into memory */
>> +		memcpy_flushcache((void *)ptr, elfbuf, elfsz);
>> +		/* The crash image is now valid once again */
>> +		xchg(&kexec_crash_image, image);
>> +	}
>> +	unmap_crash_pages((void **)&ptr);
>> +	pr_debug("crash hp: re-loaded elfcorehdr at 0x%lx\n", mem);
>> +
>> +out:
>> +	if (elfbuf)
>> +		vfree(elfbuf);
>> +}
>> +#endif /* CONFIG_CRASH_HOTPLUG */
>> -- 
>> 2.27.0
>>
> 



More information about the kexec mailing list