[PATCH v2 3/3] tpm/kexec: Duplicate TPM measurement log in of-tree for kexec
Stefan Berger
stefanb at linux.ibm.com
Thu Jun 16 08:41:30 PDT 2022
The memory area of the TPM measurement log is currently not properly
duplicated for carrying it across kexec when an Open Firmware
Devicetree is used. Therefore, the contents of the log get corrupted.
Fix this for the kexec_file_load() syscall by allocating a buffer and
copying the contents of the existing log into it. The new buffer is
preserved across the kexec and a pointer to it is available when the new
kernel is started. To achieve this, store the allocated buffer's address
in the flattened device tree (fdt) under the name linux,tpm-kexec-buffer
and search for this entry early in the kernel startup before the TPM
subsystem starts up. Adjust the pointer in the of-tree stored under
linux,sml-base to point to this buffer holding the preserved log. The TPM
driver can then read the base address from this entry when making the log
available.
Use postcore_initcall() to call the function to restore the buffer even if
the TPM subsystem or driver are not used. This allows the buffer to be
carried across the next kexec without involvement of the TPM subsystem
and ensures a valid buffer pointed to by the of-tree.
Signed-off-by: Stefan Berger <stefanb at linux.ibm.com>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Frank Rowand <frowand.list at gmail.com>
Cc: Eric Biederman <ebiederm at xmission.com>
---
drivers/of/kexec.c | 198 +++++++++++++++++++++++++++++++++++++++++-
include/linux/kexec.h | 6 ++
include/linux/of.h | 8 +-
kernel/kexec_file.c | 6 ++
4 files changed, 216 insertions(+), 2 deletions(-)
diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
index 601ea9727b0e..23a4eaf4cbc4 100644
--- a/drivers/of/kexec.c
+++ b/drivers/of/kexec.c
@@ -14,6 +14,7 @@
#include <linux/memblock.h>
#include <linux/libfdt.h>
#include <linux/of.h>
+#include <linux/of_device_node.h>
#include <linux/of_fdt.h>
#include <linux/random.h>
#include <linux/slab.h>
@@ -220,7 +221,6 @@ static void remove_ima_buffer(void *fdt, int chosen_node)
remove_buffer(fdt, chosen_node, "linux,ima-kexec-buffer");
}
-#ifdef CONFIG_IMA_KEXEC
static int setup_buffer(void *fdt, int chosen_node, const char *name,
uint64_t addr, uint64_t size)
{
@@ -242,6 +242,7 @@ static int setup_buffer(void *fdt, int chosen_node, const char *name,
}
+#ifdef CONFIG_IMA_KEXEC
/**
* setup_ima_buffer - add IMA buffer information to the fdt
* @image: kexec image being loaded.
@@ -274,6 +275,198 @@ static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
}
#endif /* CONFIG_IMA_KEXEC */
+/**
+ * tpm_get_kexec_buffer - get TPM log buffer from the previous kernel
+ * @phyaddr: On successful return, set to physical address of buffer
+ * @size: On successful return, set to the buffer size.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+static int tpm_get_kexec_buffer(void **phyaddr, size_t *size)
+{
+ int ret;
+ unsigned long tmp_addr;
+ size_t tmp_size;
+
+ ret = get_kexec_buffer("linux,tpm-kexec-buffer", &tmp_addr, &tmp_size);
+ if (ret)
+ return ret;
+
+ *phyaddr = (void *)tmp_addr;
+ *size = tmp_size;
+
+ return 0;
+}
+
+/**
+ * tpm_free_kexec_buffer - free memory used by the IMA buffer
+ */
+static int tpm_of_remove_kexec_buffer(void)
+{
+ struct property *prop;
+
+ prop = of_find_property(of_chosen, "linux,tpm-kexec-buffer", NULL);
+ if (!prop)
+ return -ENOENT;
+
+ return of_remove_property(of_chosen, prop);
+}
+
+/**
+ * remove_tpm_buffer - remove the TPM log buffer property and reservation from @fdt
+ *
+ * @fdt: Flattened Device Tree to update
+ * @chosen_node: Offset to the chosen node in the device tree
+ *
+ * The TPM log measurement buffer is of no use to a subsequent kernel, so we always
+ * remove it from the device tree.
+ */
+static void remove_tpm_buffer(void *fdt, int chosen_node)
+{
+ if (!IS_ENABLED(CONFIG_PPC64))
+ return;
+
+ remove_buffer(fdt, chosen_node, "linux,tpm-kexec-buffer");
+}
+
+/**
+ * setup_tpm_buffer - add TPM measurement log buffer information to the fdt
+ * @image: kexec image being loaded.
+ * @fdt: Flattened device tree for the next kernel.
+ * @chosen_node: Offset to the chosen node.
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int setup_tpm_buffer(const struct kimage *image, void *fdt,
+ int chosen_node)
+{
+ if (!IS_ENABLED(CONFIG_PPC64))
+ return 0;
+
+ return setup_buffer(fdt, chosen_node, "linux,tpm-kexec-buffer",
+ image->tpm_buffer_addr, image->tpm_buffer_size);
+}
+
+void tpm_add_kexec_buffer(struct kimage *image)
+{
+ struct kexec_buf kbuf = { .image = image, .buf_align = 1,
+ .buf_min = 0, .buf_max = ULONG_MAX,
+ .top_down = true };
+ struct device_node *np;
+ void *buffer;
+ u32 size;
+ u64 base;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_PPC64))
+ return;
+
+ np = of_find_node_by_name(NULL, "vtpm");
+ if (!np)
+ return;
+
+ if (of_tpm_get_sml_parameters(np, &base, &size) < 0)
+ return;
+
+ buffer = vmalloc(size);
+ if (!buffer)
+ return;
+ memcpy(buffer, __va(base), size);
+
+ kbuf.buffer = buffer;
+ kbuf.bufsz = size;
+ kbuf.memsz = size;
+ ret = kexec_add_buffer(&kbuf);
+ if (ret) {
+ pr_err("Error passing over kexec TPM measurement log buffer: %d\n",
+ ret);
+ return;
+ }
+
+ image->tpm_buffer = buffer;
+ image->tpm_buffer_addr = kbuf.mem;
+ image->tpm_buffer_size = size;
+}
+
+/**
+ * tpm_post_kexec - Make stored TPM log buffer available in of-tree
+ */
+static int __init tpm_post_kexec(void)
+{
+ struct property *newprop;
+ struct device_node *np;
+ void *phyaddr;
+ size_t size;
+ u32 oflogsize;
+ u64 unused;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_PPC64))
+ return 0;
+
+ ret = tpm_get_kexec_buffer(&phyaddr, &size);
+ if (ret)
+ return 0;
+
+ /*
+ * If any one of the following steps fails then the next kexec will
+ * cause issues due to linux,sml-base pointing to a stale buffer.
+ */
+ np = of_find_node_by_name(NULL, "vtpm");
+ if (!np)
+ goto err_free_memblock;
+
+ /* logsize must not have changed */
+ if (of_tpm_get_sml_parameters(np, &unused, &oflogsize) < 0)
+ goto err_free_memblock;
+ if (oflogsize != size)
+ goto err_free_memblock;
+
+ /* replace linux,sml-base with new physical address of buffer */
+ ret = -ENOMEM;
+ newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
+ if (!newprop)
+ goto err_free_memblock;
+
+ newprop->name = kstrdup("linux,sml-base", GFP_KERNEL);
+ if (!newprop->name)
+ goto err_free_newprop;
+
+ newprop->length = sizeof(phyaddr);
+
+ newprop->value = kmalloc(sizeof(u64), GFP_KERNEL);
+ if (!newprop->value)
+ goto err_free_newprop_struct;
+
+ if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0 &&
+ of_property_match_string(np, "compatible", "IBM,vtpm20") < 0) {
+ ret = -ENODEV;
+ goto err_free_newprop_struct;
+ } else {
+ *(u64 *)newprop->value = (u64)phyaddr;
+ }
+
+ ret = of_update_property(np, newprop);
+ if (ret) {
+ pr_err("Could not update linux,sml-base with new address");
+ goto err_free_newprop_struct;
+ }
+
+ goto exit;
+
+err_free_newprop_struct:
+ kfree(newprop->name);
+err_free_newprop:
+ kfree(newprop);
+err_free_memblock:
+ memblock_phys_free((phys_addr_t)phyaddr, size);
+exit:
+ tpm_of_remove_kexec_buffer();
+
+ return ret;
+}
+postcore_initcall(tpm_post_kexec);
+
/*
* of_kexec_alloc_and_setup_fdt - Alloc and setup a new Flattened Device Tree
*
@@ -463,6 +656,9 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
remove_ima_buffer(fdt, chosen_node);
ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
+ remove_tpm_buffer(fdt, chosen_node);
+ ret = setup_tpm_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
+
out:
if (ret) {
kvfree(fdt);
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 58d1b58a971e..a0fd7ac0398c 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -319,6 +319,12 @@ struct kimage {
void *elf_headers;
unsigned long elf_headers_sz;
unsigned long elf_load_addr;
+
+ /* Virtual address of TPM log buffer for kexec syscall */
+ void *tpm_buffer;
+
+ phys_addr_t tpm_buffer_addr;
+ size_t tpm_buffer_size;
};
/* kexec interface functions */
diff --git a/include/linux/of.h b/include/linux/of.h
index 04971e85fbc9..a86e07b58f26 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -100,6 +100,8 @@ struct of_reconfig_data {
struct property *old_prop;
};
+struct kimage;
+
/* initialize a node */
extern struct kobj_type of_node_ktype;
extern const struct fwnode_operations of_fwnode_ops;
@@ -436,13 +438,13 @@ int of_map_id(struct device_node *np, u32 id,
phys_addr_t of_dma_get_max_cpu_address(struct device_node *np);
-struct kimage;
void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
unsigned long initrd_load_addr,
unsigned long initrd_len,
const char *cmdline, size_t extra_fdt_size);
int ima_get_kexec_buffer(void **addr, size_t *size);
int ima_free_kexec_buffer(void);
+void tpm_add_kexec_buffer(struct kimage *image);
#else /* CONFIG_OF */
static inline void of_core_init(void)
@@ -844,6 +846,10 @@ static inline phys_addr_t of_dma_get_max_cpu_address(struct device_node *np)
return PHYS_ADDR_MAX;
}
+static inline void tpm_add_kexec_buffer(struct kimage *image)
+{
+}
+
#define of_match_ptr(_ptr) NULL
#define of_match_node(_matches, _node) NULL
#endif /* CONFIG_OF */
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 8347fc158d2b..3f58d044939b 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -27,6 +27,7 @@
#include <linux/kernel_read_file.h>
#include <linux/syscalls.h>
#include <linux/vmalloc.h>
+#include <linux/of.h>
#include "kexec_internal.h"
static int kexec_calculate_store_digests(struct kimage *image);
@@ -171,6 +172,9 @@ void kimage_file_post_load_cleanup(struct kimage *image)
image->ima_buffer = NULL;
#endif /* CONFIG_IMA_KEXEC */
+ vfree(image->tpm_buffer);
+ image->tpm_buffer = NULL;
+
/* See if architecture has anything to cleanup post load */
arch_kimage_file_post_load_cleanup(image);
@@ -277,6 +281,8 @@ kimage_file_prepare_segments(struct kimage *image, int kernel_fd, int initrd_fd,
/* IMA needs to pass the measurement list to the next kernel. */
ima_add_kexec_buffer(image);
+ /* Pass the TPM measurement log to next kernel */
+ tpm_add_kexec_buffer(image);
/* Call arch image load handlers */
ldata = arch_kexec_kernel_image_load(image);
--
2.35.1
More information about the kexec
mailing list