[PATCH v5 4/6] tpm: of: Make of-tree specific function commonly available

Jarkko Sakkinen jarkko at kernel.org
Thu Jul 28 00:40:28 PDT 2022


On Fri, Jul 15, 2022 at 12:01:36PM -0400, Stefan Berger wrote:
> 
> 
> On 7/10/22 23:04, Jarkko Sakkinen wrote:
> > On Wed, Jul 06, 2022 at 11:23:27AM -0400, Stefan Berger wrote:
> > > Simplify tpm_read_log_of() by moving reusable parts of the code into
> > > an inline function that makes it commonly available so it can be
> > > used also for kexec support. Call the new of_tpm_get_sml_parameters()
> > > function from the TPM Open Firmware driver.
> > > 
> > > Signed-off-by: Stefan Berger <stefanb at linux.ibm.com>
> > > Cc: Jarkko Sakkinen <jarkko at kernel.org>
> > > Cc: Jason Gunthorpe <jgg at ziepe.ca>
> > > Cc: Rob Herring <robh+dt at kernel.org>
> > > Cc: Frank Rowand <frowand.list at gmail.com>
> > > 
> > > ---
> > > v4:
> > >   - converted to inline function
> > > ---
> > >   drivers/char/tpm/eventlog/of.c | 31 +++++--------------------------
> > >   include/linux/tpm.h            | 27 +++++++++++++++++++++++++++
> > >   2 files changed, 32 insertions(+), 26 deletions(-)
> > > 
> > > diff --git a/drivers/char/tpm/eventlog/of.c b/drivers/char/tpm/eventlog/of.c
> > > index a9ce66d09a75..f9462d19632e 100644
> > > --- a/drivers/char/tpm/eventlog/of.c
> > > +++ b/drivers/char/tpm/eventlog/of.c
> > > @@ -12,6 +12,7 @@
> > >   #include <linux/slab.h>
> > >   #include <linux/of.h>
> > > +#include <linux/tpm.h>
> > >   #include <linux/tpm_eventlog.h>
> > >   #include "../tpm.h"
> > > @@ -20,11 +21,10 @@
> > >   int tpm_read_log_of(struct tpm_chip *chip)
> > >   {
> > >   	struct device_node *np;
> > > -	const u32 *sizep;
> > > -	const u64 *basep;
> > >   	struct tpm_bios_log *log;
> > >   	u32 size;
> > >   	u64 base;
> > > +	int ret;
> > >   	log = &chip->log;
> > >   	if (chip->dev.parent && chip->dev.parent->of_node)
> > > @@ -35,30 +35,9 @@ int tpm_read_log_of(struct tpm_chip *chip)
> > >   	if (of_property_read_bool(np, "powered-while-suspended"))
> > >   		chip->flags |= TPM_CHIP_FLAG_ALWAYS_POWERED;
> > > -	sizep = of_get_property(np, "linux,sml-size", NULL);
> > > -	basep = of_get_property(np, "linux,sml-base", NULL);
> > > -	if (sizep == NULL && basep == NULL)
> > > -		return -ENODEV;
> > > -	if (sizep == NULL || basep == NULL)
> > > -		return -EIO;
> > > -
> > > -	/*
> > > -	 * For both vtpm/tpm, firmware has log addr and log size in big
> > > -	 * endian format. But in case of vtpm, there is a method called
> > > -	 * sml-handover which is run during kernel init even before
> > > -	 * device tree is setup. This sml-handover function takes care
> > > -	 * of endianness and writes to sml-base and sml-size in little
> > > -	 * endian format. For this reason, vtpm doesn't need conversion
> > > -	 * but physical tpm needs the conversion.
> > > -	 */
> 
> 
> Jarkko,
> 
>  can I apply your R-b tag after putting this lost comment back into the
> inline function?
>    Stefan

If there's a change I want to see the updated patch first.

BR, Jarkko



More information about the kexec mailing list