[PATCH v5 2/6] powerpc/kexec_file: Add KEXEC_SIG support.

Michal Suchánek msuchanek at suse.de
Mon Feb 14 07:55:24 PST 2022


Hello,

On Mon, Feb 14, 2022 at 10:14:16AM -0500, Mimi Zohar wrote:
> Hi Michal,
> 
> On Sun, 2022-02-13 at 21:59 -0500, Mimi Zohar wrote:
> 
> > 
> > On Tue, 2022-01-11 at 12:37 +0100, Michal Suchanek wrote:
> > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > > index dea74d7717c0..1cde9b6c5987 100644
> > > --- a/arch/powerpc/Kconfig
> > > +++ b/arch/powerpc/Kconfig
> > > @@ -560,6 +560,22 @@ config KEXEC_FILE
> > >  config ARCH_HAS_KEXEC_PURGATORY
> > >         def_bool KEXEC_FILE
> > >  
> > > +config KEXEC_SIG
> > > +       bool "Verify kernel signature during kexec_file_load() syscall"
> > > +       depends on KEXEC_FILE && MODULE_SIG_FORMAT
> > > +       help
> > > +         This option makes kernel signature verification mandatory for

This is actually wrong. KEXEC_SIG makes it mandatory that any signature
that is appended is valid and made by a key that is part of the platform
keyiring (which is also wrong, built-in keys should be also accepted).
KEXEC_SIG_FORCE or an IMA policy makes it mandatory that the signature
is present.

> > > +         the kexec_file_load() syscall.
> > 
> > When KEXEC_SIG is enabled on other architectures, IMA does not define a
> > kexec 'appraise' policy rule.  Refer to the policy rules in
> > security/ima/ima_efi.c.  Similarly the kexec 'appraise' policy rule in

I suppose you mean security/integrity/ima/ima_efi.c

I also think it's misguided because KEXEC_SIG in itself does not enforce
the signature. KEXEC_SIG_FORCE does.

> > arch/powerpc/kernel/ima_policy.c should not be defined.

I suppose you mean arch/powerpc/kernel/ima_arch.c - see above.


Thanks for taking the time to reseach and summarize the differences.

> The discussion shouldn't only be about IMA vs. KEXEC_SIG kernel image
> signature verification.  Let's try and reframe the problem a bit.
> 
> 1. Unify and simply the existing kexec signature verification so
> verifying the KEXEC kernel image signature works irrespective of
> signature type - PE, appended signature.
> 
> solution: enable KEXEC_SIG  (This patch set, with the above powerpc IMA
> policy changes.)
> 
> 2. Measure and include the kexec kernel image in a log for attestation,
> if desired.
> 
> solution: enable IMA_ARCH_POLICY 
> - Powerpc: requires trusted boot to be enabled.
> - EFI:   requires  secure boot to be enabled.  The IMA efi policy
> doesn't differentiate between secure and trusted boot.
> 
> 3. Carry the kexec kernel image measurement across kexec, if desired
> and supported on the architecture.
> 
> solution: enable IMA_KEXEC
> 
> Comparison: 
> - Are there any differences between IMA vs. KEXEC_SIG measuring the
> kexec kernel image?
> 
> One of the main differences is "what" is included in the measurement
> list differs.  In both cases, the 'd-ng' field of the IMA measurement
> list template (e.g. ima-ng, ima-sig, ima-modsig) is the full file hash
> including the appended signature.  With IMA and the 'ima-modsig'
> template, an additional hash without the appended signature is defined,
> as well as including the appended signature in the 'sig' field.
> 
> Including the file hash and appended signature in the measurement list
> allows an attestation server, for example, to verify the appended
> signature without having to know the file hash without the signature.

I don't understand this part. Isn't the hash *with* signature always
included, and the distinguishing part about IMA is the hash *without*
signature which is the same irrespective of signature type (PE, appended
xattr) and irrespective of the keyt used for signoing?

> Other differences are already included in the Kconfig KEXEC_SIG "Notes"
> section.

Which besides what is already described above would be blacklisting
specific binaries, which is much more effective if you have hashes of
binaries without signature.

Thanks

Michal



More information about the kexec mailing list