[PATCH v4 09/10] crash hp: Add x86 crash hotplug support for kexec_file_load

Eric DeVolder eric.devolder at oracle.com
Wed Feb 9 11:57:05 PST 2022


For x86_64, when CPU or memory is hot un/plugged, the crash
elfcorehdr, which describes the CPUs and memory in the system,
must also be updated.

To update the elfcorehdr for x86_64, a new elfcorehdr must be
generated from the available CPUs and memory. The new elfcorehdr
is prepared into a buffer, and if no errors occur, it is
installed over the top of the existing elfcorehdr.

In the patch 'crash hp: exclude elfcorehdr from the segment digest'
the need to update purgatory due to the change in elfcorehdr was
eliminated.  As a result, no changes to purgatory or boot_params
(as the elfcorehdr= kernel command line parameter pointer
remains unchanged and correct) are needed, just elfcorehdr.

To accommodate a growing number of resources via hotplug, the
elfcorehdr segment must be sufficiently large enough to accommodate
changes, see the CRASH_HOTPLUG_ELFCOREHDR_SZ configure item.

With this change, the kexec_file_load syscall (not kexec_load)
is supported. When loading the crash kernel via kexec_file_load,
the elfcorehdr is identified at load time in crash_load_segments().

Signed-off-by: Eric DeVolder <eric.devolder at oracle.com>
---
 arch/x86/kernel/crash.c | 92 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 9db41cce8d97..6215c51919db 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/memblock.h>
+#include <linux/highmem.h>
 
 #include <asm/processor.h>
 #include <asm/hardirq.h>
@@ -398,7 +399,17 @@ int crash_load_segments(struct kimage *image)
 	image->elf_headers = kbuf.buffer;
 	image->elf_headers_sz = kbuf.bufsz;
 
+#ifdef CONFIG_CRASH_HOTPLUG
+	/* Ensure elfcorehdr segment large enough for hotplug changes */
+	kbuf.memsz = CONFIG_CRASH_HOTPLUG_ELFCOREHDR_SZ;
+	/* For marking as usable to crash kernel */
+	image->elf_headers_sz = kbuf.memsz;
+	/* Record the index of the elfcorehdr segment */
+	image->elf_index = image->nr_segments;
+	image->elf_index_valid = true;
+#else
 	kbuf.memsz = kbuf.bufsz;
+#endif
 	kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
 	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 	ret = kexec_add_buffer(&kbuf);
@@ -413,3 +424,84 @@ int crash_load_segments(struct kimage *image)
 	return ret;
 }
 #endif /* CONFIG_KEXEC_FILE */
+
+#ifdef CONFIG_CRASH_HOTPLUG
+/**
+ * arch_crash_hotplug_handler() - Handle hotplug elfcorehdr changes
+ * @image: the active struct kimage
+ * @hp_action: the hot un/plug action being handled
+ * @a: first parameter dependent upon hp_action
+ * @b: first parameter dependent upon hp_action
+ *
+ * To accurately reflect hot un/plug changes, the elfcorehdr (which
+ * is passed to the crash kernel via the elfcorehdr= parameter)
+ * must be updated with the new list of CPUs and memories. The new
+ * elfcorehdr is prepared in a kernel buffer, and if no errors,
+ * then it is written on top of the existing/old elfcorehdr.
+ *
+ * For hotplug changes to elfcorehdr to work, two conditions are
+ * needed:
+ * First, the segment containing the elfcorehdr must be large enough
+ * to permit a growing number of resources. See
+ * CONFIG_CRASH_HOTPLUG_ELFCOREHDR_SZ.
+ * Second, purgatory must explicitly exclude the elfcorehdr from the
+ * list of segments it checks (since the elfcorehdr changes and thus
+ * would require an update to purgatory itself to update the digest).
+ *
+ */
+void arch_crash_hotplug_handler(struct kimage *image,
+	unsigned int hp_action, unsigned long a, unsigned long b)
+{
+	struct kexec_segment *ksegment;
+	unsigned char *ptr = NULL;
+	unsigned long elfsz = 0;
+	void *elfbuf = NULL;
+	unsigned long mem, memsz;
+
+	/* Must have valid elfcorehdr index */
+	if (!image->elf_index_valid) {
+		pr_err("crash hp: unable to locate elfcorehdr segment");
+		goto out;
+	}
+
+	ksegment = &image->segment[image->elf_index];
+	mem = ksegment->mem;
+	memsz = ksegment->memsz;
+
+	/*
+	 * Create the new elfcorehdr reflecting the changes to CPU and/or
+	 * memory resources. The elfcorehdr segment memsz must be
+	 * sufficiently large to accommodate increases due to hotplug
+	 * activity. See CRASH_HOTPLUG_ELFCOREHDR_SZ.
+	 */
+	if (prepare_elf_headers(image, &elfbuf, &elfsz)) {
+		pr_err("crash hp: unable to prepare elfcore headers");
+		goto out;
+	}
+	if (elfsz > memsz) {
+		pr_err("crash hp: update elfcorehdr elfsz %lu > memsz %lu",
+			elfsz, memsz);
+		goto out;
+	}
+
+	/*
+	 * At this point, we are all but assured of success.
+	 * Copy new elfcorehdr into destination.
+	 */
+	ptr = map_crash_pages(mem, memsz);
+	if (ptr) {
+		/* Temporarily invalidate the crash image while it is replaced */
+		xchg(&kexec_crash_image, NULL);
+		/* Write the new elfcorehdr into memory */
+		memcpy_flushcache((void *)ptr, elfbuf, elfsz);
+		/* The crash image is now valid once again */
+		xchg(&kexec_crash_image, image);
+	}
+	unmap_crash_pages((void **)&ptr);
+	pr_debug("crash hp: re-loaded elfcorehdr at 0x%lx\n", mem);
+
+out:
+	if (elfbuf)
+		vfree(elfbuf);
+}
+#endif /* CONFIG_CRASH_HOTPLUG */
-- 
2.27.0




More information about the kexec mailing list