[RFC PATCH] kdump: Add support for crashkernel=auto
Petr Tesařík
ptesarik at suse.cz
Thu Feb 3 21:34:19 PST 2022
Hi Philipp,
Dne 31. 01. 22 v 11:33 Philipp Rudo napsal(a):
> Hi,
>
> On Fri, 28 Jan 2022 11:31:49 +0100
> Petr Tesařík <ptesarik at suse.cz> wrote:
>
>> Hi Tiezhu Yang,
>>
>> On Jan 28, 2022 at 02:20 Tiezhu Yang wrote:
>>> [...]
>>> Hi Petr,
>>>
>>> Thank you for your reply.
>>>
>>> This is a RFC patch, the initial aim of this patch is to discuss what is
>>> the proper way to support crashkernel=auto.
>>
>> Well, the point I'm trying to make is that crashkernel=auto cannot be
>> implemented. Your code would have to know what happens in the future,
>> and AFAIK time travel has not been discovered yet. ;-)
>>
>> A better approach is to make a very large allocation initially, e.g.
>> half of available RAM. The remaining RAM should still be big enough to
>> start booting the system. Later, when a kdump user-space service knows
>> what it wants to load, it can shrink the reservation by writing a lower
>> value into /sys/kernel/kexec_crash_size.
>
> Even this approach doesn't work in every situation. For example it
> requires that the system has at least twice the RAM it requires to
> safely boot. That's not always given for e.g minimalistic VMs or
> embedded systems.
If you reserve more RAM for the panic kernel than for running your
actual workload, then you definitely have very special needs, and you
should not expect that everything works out of the box.
> Furthermore the memory requirement can also change during runtime due
> to, e.g. workload spikes, device hot plug, moving the dump target from
> an un-encrypted to an encrypted disk, etc.. So even when your user-space
> program can exactly calculate the memory requirement at the moment
> it loads kdump it might be too little at the moment the system panics.
> In order for it to work the user-space would constantly need to monitor
> how much memory is needed and adjust the requirement. But that would
> also require to increase the reservation during runtime which would be
> extremely expensive (if possible at all).
>
> All in all I support Petr that time travel is the only proper solution
> for implementing crashkernel=auto. But once we have time travel I
> would prefer to use the gained knowledge to fix the bug that triggered
> the panic rather than calculating the memory requirement for kdump.
Yeah, long live patching! :-)
>> The alternative approach does not need any changes to the kernel, except
>> maybe adding something like "crashkernel=max".
>
> A slightly different approach is for the user-space tool to simply set
> the crashkernel= parameter on the kernel commandline for the next boot.
> This also works for memory restrained systems. Needs a reboot though...
The downside is that if you remove some memory while your system is off,
then a reservation calculate for the previous RAM size may no longer be
possible on the next boot, and the kernel will boot up without any
reservation. That's where "crashkernel=max" would come in handy. Let me
send a patch and see the discussion.
Petr T
>>> A moment ago, I find the following patch, it is more flexible, but it is
>>> not merged into the upstream kernel now.
>>>
>>> kernel/crash_core: Add crashkernel=auto for vmcore creation
>>>
>>> https://lore.kernel.org/lkml/20210223174153.72802-1-saeed.mirzamohammadi@oracle.com/
>
> The patch was ultimately rejected by Linus
>
> https://lore.kernel.org/linux-mm/20210507010432.IN24PudKT%25akpm@linux-foundation.org/
>
> Thanks
> Philipp
>
>>>
>>>>
>>>>> [...]
>>>>> diff --git a/kernel/crash_core.c b/kernel/crash_core.c
>>>>> index 256cf6d..32c51e2 100644
>>>>> --- a/kernel/crash_core.c
>>>>> +++ b/kernel/crash_core.c
>>>>> @@ -252,6 +252,26 @@ static int __init __parse_crashkernel(char
>>>>> *cmdline,
>>>>> if (suffix)
>>>>> return parse_crashkernel_suffix(ck_cmdline, crash_size,
>>>>> suffix);
>>>>> +
>>>>> + if (strncmp(ck_cmdline, "auto", 4) == 0) {
>>>>> +#if defined(CONFIG_X86_64) || defined(CONFIG_S390)
>>>>> + ck_cmdline = "1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M";
>>>>> +#elif defined(CONFIG_ARM64)
>>>>> + ck_cmdline = "2G-:448M";
>>>>> +#elif defined(CONFIG_PPC64)
>>>>> + char *fadump_cmdline;
>>>>> +
>>>>> + fadump_cmdline = get_last_crashkernel(cmdline, "fadump=",
>>>>> NULL);
>>>>> + fadump_cmdline = fadump_cmdline ?
>>>>> + fadump_cmdline + strlen("fadump=") : NULL;
>>>>> + if (!fadump_cmdline || (strncmp(fadump_cmdline, "off", 3) ==
>>>>> 0))
>>>>> + ck_cmdline =
>>>>> "2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G";
>>>>> + else
>>>>> + ck_cmdline =
>>>>> "4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G";
>>>>>
>>>>>
>>>>> +#endif
>>>>> + pr_info("Using crashkernel=auto, the size chosen is a best
>>>>> effort estimation.\n");
>>>>> + }
>>>>> +
>>>>
>>>> How did you even arrive at the above numbers?
>>>
>>> Memory requirements for kdump:
>>>
>>> https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/managing_monitoring_and_updating_the_kernel/supported-kdump-configurations-and-targets_managing-monitoring-and-updating-the-kernel#memory-requirements-for-kdump_supported-kdump-configurations-and-targets
>>>
>>>
>>> I've done some research on
>>>> this topic recently (ie. during the last 7 years or so). My x86_64
>>>> system with 8G RAM running openSUSE Leap 15.3 seems needs 188M for
>>>> saving to the local disk, and 203M to save over the network (using
>>>> SFTP). My PPC64 LPAR with 16G RAM running latest Beta of SLES 15 SP4
>>>> needs 587M, i.e. with the above numbers it may run out of memory while
>>>> saving the dump.
>>>>
>>>> Since this is not the first time, I'm trying to explain things, I've
>>>> written a blog post now:
>>>>
>>>> https://sigillatum.tesarici.cz/2022-01-27-whats-wrong-with-crashkernel-auto.html
>>>>
>>>>
>>>
>>> Thank you, this is useful.
>>>
>>> Thanks,
>>> Tiezhu
>>>
>>>>
>>>> HTH
>>>> Petr Tesarik
>>>
>>>
>>> _______________________________________________
>>> kexec mailing list
>>> kexec at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/kexec
>>
>> _______________________________________________
>> kexec mailing list
>> kexec at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/kexec
>
>
> _______________________________________________
> kexec mailing list
> kexec at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
More information about the kexec
mailing list