[PATCH v3 3/3] kexec: Introduce parameters load_limit_reboot and load_limit_panic
Ricardo Ribalda
ribalda at chromium.org
Tue Dec 20 17:22:57 PST 2022
Hi Steven
Thanks for your review!!! Will send a new version.
After giving it a thought... you are right :). setting the current
value should return -EINVAL. We should only return OK if we actually
do something.
On Wed, 21 Dec 2022 at 01:22, Steven Rostedt <rostedt at goodmis.org> wrote:
>
> On Tue, 20 Dec 2022 23:05:45 +0100
> Ricardo Ribalda <ribalda at chromium.org> wrote:
>
> I hate to be the grammar police, but..
>
> > Add two parameter to specify how many times a kexec kernel can be loaded.
>
> "parameters"
>
> >
> > The sysadmin can set different limits for kexec panic and kexec reboot
> > kernels.
> >
> > The value can be modified at runtime via sysfs, but only with a value
> > smaller than the current one (except -1).
> >
> > Signed-off-by: Ricardo Ribalda <ribalda at chromium.org>
> > ---
> > Documentation/admin-guide/kernel-parameters.txt | 14 ++++
> > include/linux/kexec.h | 2 +-
> > kernel/kexec.c | 2 +-
> > kernel/kexec_core.c | 91 ++++++++++++++++++++++++-
> > kernel/kexec_file.c | 2 +-
> > 5 files changed, 106 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index 42af9ca0127e..2b37d6a20747 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -2374,6 +2374,20 @@
> > for Movable pages. "nn[KMGTPE]", "nn%", and "mirror"
> > are exclusive, so you cannot specify multiple forms.
> >
> > + kexec_core.load_limit_reboot=
> > + kexec_core.load_limit_panic=
> > + [KNL]
> > + This parameter specifies a limit to the number of times
> > + a kexec kernel can be loaded.
> > + Format: <int>
> > + -1 = Unlimited.
> > + int = Number of times kexec can be called.
> > +
> > + During runtime, this parameter can be modified with a
>
> > + value smaller than the current one (but not -1).
>
> Perhaps state:
> smaller positive value than the current one or if
> current is currently -1.
I find it a bit complicated..
What about:
During runtime this parameter can be modified with a more restrictive value
>
> > +
> > + Default: -1
> > +
> > kgdbdbgp= [KGDB,HW] kgdb over EHCI usb debug port.
> > Format: <Controller#>[,poll interval]
> > The controller # is the number of the ehci usb debug
> > diff --git a/include/linux/kexec.h b/include/linux/kexec.h
> > index 182e0c11b87b..5daf9990d5b8 100644
> > --- a/include/linux/kexec.h
> > +++ b/include/linux/kexec.h
> > @@ -407,7 +407,7 @@ extern int kimage_crash_copy_vmcoreinfo(struct kimage *image);
> > extern struct kimage *kexec_image;
> > extern struct kimage *kexec_crash_image;
> >
> > -bool kexec_load_permitted(void);
> > +bool kexec_load_permitted(bool crash_image);
> >
> > #ifndef kexec_flush_icache_page
> > #define kexec_flush_icache_page(page)
> > diff --git a/kernel/kexec.c b/kernel/kexec.c
> > index ce1bca874a8d..7aefd134e319 100644
> > --- a/kernel/kexec.c
> > +++ b/kernel/kexec.c
> > @@ -193,7 +193,7 @@ static inline int kexec_load_check(unsigned long nr_segments,
> > int result;
> >
> > /* We only trust the superuser with rebooting the system. */
> > - if (!kexec_load_permitted())
> > + if (!kexec_load_permitted(flags & KEXEC_ON_CRASH))
>
> Note, here we have KEXEC_ON_CRASH (see bottom).
>
> > return -EPERM;
> >
> > /* Permit LSMs and IMA to fail the kexec */
> > diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
> > index a1efc70f4158..adf71f2be3ff 100644
> > --- a/kernel/kexec_core.c
> > +++ b/kernel/kexec_core.c
> > @@ -952,13 +952,100 @@ static int __init kexec_core_sysctl_init(void)
> > late_initcall(kexec_core_sysctl_init);
> > #endif
> >
> > -bool kexec_load_permitted(void)
> > +struct kexec_load_limit {
> > + /* Mutex protects the limit count. */
> > + struct mutex mutex;
> > + int limit;
> > +};
> > +
> > +struct kexec_load_limit load_limit_reboot = {
>
> Perhaps make the above static?
>
> > + .mutex = __MUTEX_INITIALIZER(load_limit_reboot.mutex),
> > + .limit = -1,
> > +};
> > +
> > +struct kexec_load_limit load_limit_panic = {
>
> static?
>
> > + .mutex = __MUTEX_INITIALIZER(load_limit_panic.mutex),
> > + .limit = -1,
> > +};
> > +
> > +static int param_get_limit(char *buffer, const struct kernel_param *kp)
> > {
> > + int ret;
> > + struct kexec_load_limit *limit = kp->arg;
>
> Looks better if "int ret;" is after the "limit".
>
> > +
> > + mutex_lock(&limit->mutex);
> > + ret = scnprintf(buffer, PAGE_SIZE, "%i\n", limit->limit);
>
> The above string can be at most "-2147483648\n\0"
>
> Which is 13 characters. Why use PAGE_SIZE. Or scnprintf(), and not just
> state:
>
like it!
> /* buffer is PAGE_SIZE, much larger than what %i can be */
> ret = sprintf(buffer, "%i\n", limit->limit);
>
> > + mutex_unlock(&limit->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static int param_set_limit(const char *buffer, const struct kernel_param *kp)
> > +{
> > + int ret;
> > + struct kexec_load_limit *limit = kp->arg;
> > + int new_val;
> > +
> > + ret = kstrtoint(buffer, 0, &new_val);
> > + if (ret)
> > + return ret;
> > +
> > + new_val = max(-1, new_val);
>
> I wonder if anything less than -1 should be invalid.
>
> > +
> > + mutex_lock(&limit->mutex);
> > +
> > + if (new_val == -1 && limit->limit != -1) {
>
> If -1 can't change the value, why allow it to be passed in to begin with.
>
> Perhaps we should only allow sysctl to set positive values? Would make the
> code simpler.
>
> > + ret = -EINVAL;
> > + goto done;
> > + }
> > +
> > + if (limit->limit != -1 && new_val > limit->limit) {
>
> Since the above documentation said "small than" perhaps ">="?
>
> > + ret = -EINVAL;
> > + goto done;
> > + }
> > +
> > + limit->limit = new_val;
> > +
> > +done:
> > + mutex_unlock(&limit->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct kernel_param_ops load_limit_ops = {
> > + .get = param_get_limit,
> > + .set = param_set_limit,
> > +};
> > +
> > +module_param_cb(load_limit_reboot, &load_limit_ops, &load_limit_reboot, 0644);
> > +MODULE_PARM_DESC(load_limit_reboot, "Maximum attempts to load a kexec reboot kernel");
> > +
> > +module_param_cb(load_limit_panic, &load_limit_ops, &load_limit_panic, 0644);
> > +MODULE_PARM_DESC(load_limit_reboot, "Maximum attempts to load a kexec panic kernel");
>
> Wait, why the module params if this can not be a module?
>
> The kernel/kexec.c is decided via CONFIG_KEXEC_CORE which is bool. Either
> builtin or not at all. No module selection possible.
>
> For kernel parameters, we should just use __setup(), right?
Isn't __setup() only kernel parameter and then it cannot be updated on runtime?
What about using late_param_cb? and remove MODULE_PARAM_DESC ?
I think this is how these parameters work
$ ls /sys/module/kernel/parameters/
consoleblank crash_kexec_post_notifiers ignore_rlimit_data
initcall_debug module_blacklist panic panic_on_warn panic_print
pause_on_oops
>
> > +
> > +bool kexec_load_permitted(bool crash_image)
> > +{
> > + struct kexec_load_limit *limit;
> > +
> > /*
> > * Only the superuser can use the kexec syscall and if it has not
> > * been disabled.
> > */
> > - return capable(CAP_SYS_BOOT) && !kexec_load_disabled;
> > + if (!capable(CAP_SYS_BOOT) || kexec_load_disabled)
> > + return false;
> > +
> > + /* Check limit counter and decrease it.*/
> > + limit = crash_image ? &load_limit_panic : &load_limit_reboot;
> > + mutex_lock(&limit->mutex);
> > + if (!limit->limit) {
> > + mutex_unlock(&limit->mutex);
> > + return false;
> > + }
> > + if (limit->limit != -1)
> > + limit->limit--;
> > + mutex_unlock(&limit->mutex);
> > +
> > + return true;
> > }
> >
> > /*
> > diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
> > index 29efa43ea951..6a1d4b07635e 100644
> > --- a/kernel/kexec_file.c
> > +++ b/kernel/kexec_file.c
> > @@ -330,7 +330,7 @@ SYSCALL_DEFINE5(kexec_file_load, int, kernel_fd, int, initrd_fd,
> > struct kimage **dest_image, *image;
> >
> > /* We only trust the superuser with rebooting the system. */
> > - if (!kexec_load_permitted())
> > + if (!kexec_load_permitted(flags & KEXEC_FILE_FLAGS))
>
> Here we have KEXEC_FILE_FLAGS, where above it was KEXCE_FILE_CRASH.
>
> This is confusing to what denotes the "crash_image" boolean. Can we just
> pass in flags and figure it out in the kexec_load_permitted() function?
This is a typo and a bad one!, thanks for catching up!.
It should be KEXEC_ON_CRASH and KEXEC_FILE_ON_CRASH, Of course both
have different values
I could pass the flags and then check for flags & (KEXEC_ON_CRASH |
KEXEC_FILE_ON_CRASH)... but not sure if it is better
>
> -- Steve
>
>
> > return -EPERM;
> >
> > /* Make sure we have a legal set of flags */
> >
>
--
Ricardo Ribalda
More information about the kexec
mailing list