[PATCH v1] proc/vmcore: fix clearing user buffer by properly using clear_user()

[Baoquan He]

On 11/12/21 at 09:16am, David Hildenbrand wrote:
> On 12.11.21 08:01, Baoquan He wrote:
> > On 11/11/21 at 08:18pm, David Hildenbrand wrote:
> >> To clear a user buffer we cannot simply use memset, we have to use
> >> clear_user(). Using a kernel config based on rawhide Fedora and a
> >> virtio-mem device that registers a vmcore_cb, I can easily trigger:
> >>
> >> [   11.327580] systemd[1]: Starting Kdump Vmcore Save Service...
> >> [   11.339697] kdump[420]: Kdump is using the default log level(3).
> >> [   11.370964] kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
> >> [   11.373997] kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
> >> [   11.385357] kdump[465]: saving vmcore-dmesg.txt complete
> >> [   11.386722] kdump[467]: saving vmcore
> >> [   16.531275] BUG: unable to handle page fault for address: 00007f2374e01000
> >> [   16.531705] #PF: supervisor write access in kernel mode
> >> [   16.532037] #PF: error_code(0x0003) - permissions violation
> >> [   16.532396] PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
> >> [   16.532872] Oops: 0003 [#1] PREEMPT SMP NOPTI
> >> [   16.533154] CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
> >> [   16.533513] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
> >> [   16.534198] RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
> >> [   16.534552] Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
> >> [   16.535670] RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
> >> [   16.535998] RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
> >> [   16.536441] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
> >> [   16.536878] RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
> >> [   16.537315] R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
> >> [   16.537755] R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
> >> [   16.538200] FS:  00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
> >> [   16.538696] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> [   16.539055] CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
> >> [   16.539510] Call Trace:
> >> [   16.539679]  <TASK>
> >> [   16.539828]  read_vmcore+0x236/0x2c0
> >> [   16.540063]  ? enqueue_hrtimer+0x2f/0x80
> >> [   16.540323]  ? inode_security+0x22/0x60
> >> [   16.540572]  proc_reg_read+0x55/0xa0
> >> [   16.540807]  vfs_read+0x95/0x190
> >> [   16.541022]  ksys_read+0x4f/0xc0
> >> [   16.541238]  do_syscall_64+0x3b/0x90
> >> [   16.541475]  entry_SYSCALL_64_after_hwframe+0x44/0xae
> >>
> >> To fix, properly use clear_user() when required.
> > 
> > Looks a great fix to me, thanks for fixing this. 
> > 
> > Check the code, clear_user invokes access_ok to do check, then call
> > memset(). It's unclear to me how the bug is triggered, could you
> > please tell more so that I can learn? 
> >
> TBH, I was testing virtio-mem+vmcore before without running into this
> issue, but after I retested with upstream in a different setup
> (different kernel config but eventually also different CPU features), I
> ran into this.
> 
> 
> Note that you were looking at the generic __clear_user() implementation,
> the x86-64 variant is different, see arch/x86/lib/usercopy_64.c
> 
> I can spot that it triggers stac()/clac() (X86_SMAP):
> https://en.wikipedia.org/wiki/Supervisor_Mode_Access_Prevention
> 
> "that allows supervisor mode programs to optionally set user-space
> memory mappings so that access to those mappings from supervisor mode
> will cause a trap. This makes it harder for malicious programs to
> "trick" the kernel into using instructions or data from a user-space
> program"

OK, probably. I thought it's triggered in access_ok(), and tried to
figure out why. But seems we should do something to check this in
access_ok(), otherwise the logic of clear_user/_clear_user is not so
reasonable. Anyway, I have learned it, thanks a lot for digging it out.

By the way, I can't open above wiki article, found below commit from
hpa. Maybe we can add some into log to tell this, not strong opinin,
leave it to you.

For this patch, looks good to me.

Acked-by: Baoquan He <bhe at redhat.com>

~~~~~~~~~
commit 63bcff2a307b9bcc712a8251eb27df8b2e117967
Author: H. Peter Anvin <hpa at linux.intel.com>
Date:   Fri Sep 21 12:43:12 2012 -0700

    x86, smap: Add STAC and CLAC instructions to control user space access
    
    When Supervisor Mode Access Prevention (SMAP) is enabled, access to
    userspace from the kernel is controlled by the AC flag.  To make the
    performance of manipulating that flag acceptable, there are two new
    instructions, STAC and CLAC, to set and clear it.
    
    This patch adds those instructions, via alternative(), when the SMAP
    feature is enabled.  It also adds X86_EFLAGS_AC unconditionally to the
    SYSCALL entry mask; there is simply no reason to make that one
    conditional.
    
    Signed-off-by: H. Peter Anvin <hpa at linux.intel.com>
    Link: http://lkml.kernel.org/r/1348256595-29119-9-git-send-email-hpa@linux.intel.com