[PATCH] x86_64, vmcoreinfo: Append 'page_offset_base' to vmcoreinfo

Baoquan He bhe at redhat.com
Mon Oct 29 19:07:52 PDT 2018


On 10/29/18 at 04:07pm, Bhupesh Sharma wrote:
> I am sorry, I understand that the commit log is a bit long and

Yes, it's too long. Please summarize well so that it can save reviewers'
time.

> probably this part
> is not easy to infer. Currently, I see that the 'makedumpfile' utility
> is broken with newer kernels
> (I tested on 4.19-rc8+) as we KCORE_REMAP  was added to recent kernels
> thus leading to an additional section in kcore.
> [see <http://lists.infradead.org/pipermail/kexec/2018-October/021769.html>
> for details].

Why it's broken? Have you investigated and figured out why it's broken?
If fix, what patch will it look like? Does the patch prove it's not
worth using the current way?

Have you thought about this in advance? Or still like before, you said
on arm64 you found different boards have different behaviour, then
makedumpfile maintainer Kazu said he investigated and found it may be
caused by KALSR. This time, for this KCORE_REMAP adding, can you help to
investigate further and give an answer to the issue you found and
raised?

> 
> The details of the makedumpfile utility can be seen via the man page
> [MAKEDUMPFILE(8)],
> but in short it tries to make a small DUMPFILE by compressing dump
> data or by excluding
> unnecessary pages for analysis, or both.
> 
> However the bigger problem is how we export machine specific details
> from kernel-space
> to user-land in a standardized way. As I mentioned in brief in the git
> log, I was seeing
> issues when I upgrade kernels or try to bring up user-space utilities
> on newer hardware,
> as currently we use different (and often flaky approaches) to
> calculate machine specific details in
> user-space code as there used to be lack of a clear ABI between the
> kernel and user-space on how
> machine specific details would be shared.
> 
> Later on, kernel commit 23c85094fe1895caefdd came, which adds
> vmcoreinfo to 'kcore',
> as an arch agnostic approach to unify the differences existing in
> exporting kernel space information
> to the user-space code and James suggested that I use the same for
> user-space purposes to fix
> the issues I was observing.
> 
> > Sorry I didn't get what problem this patch is trying to fix from the
> > patch log.
> 
> So, here since the 'page_offset_base' variable (which holds the start
> of direct mapping of all physical
> memory) is not exported by the x86_64 kernel to the user-space via a
> standard interface, we resort
> to calculating the same via reading PT_LOADs in user-space (as an
> example from the makedumpfile
> implementation ). Now this implementation is usually different across
> user-space utilities.
> 
> Also, if the PT_LOAD ordering changes (as we saw with the newer
> kernels), this approach will need
> fixing to calculate the addresses. In addition, we normally need
> 'page_offset_base' value in user-space (and retrieve it via
> vmlinux file in another user case from the same makedumpfile code) for
> calculating the start of direct mapping of all physical
> memory specifically for KASLR boot cases.
> 
> Instead, if we can export 'page_offset_base' via vmcoreinfo, we can
> easily use the same
> for live-debugging a running kernel via user-space utilities, which
> can benefit by reading this value
> from the vmcoreinfo note inside kcore directly without relying on other methods.

We have got a method, what's wrong with that? Only KCORE_REMAP adding,
again? if fix, what is the defect? Where's patch, analysis, only one
sentence to say KCORE_REMAP caused that? 

> 
> The x86_64 kernel code ('arch/x86/kernel/head64.c'), already sets the same as:
> unsigned long page_offset_base __ro_after_init = __PAGE_OFFSET_BASE_L4;
> 
> and also uses the same to indicate the base of KASLR regions on x86_64:
> static __initdata struct kaslr_memory_region {
>     unsigned long *base;
>     unsigned long size_tb;
> } kaslr_regions[] = {
>     { &page_offset_base, 0 },
> 
> so it can be used for both the above purposes across user-space utilities.
> 
> Hope this explains the intention behind this patch.
> 
> Thanks,
> Bhupesh
> 
> > About this, I have replied to you in
> > lkml.kernel.org/r/20181025063446.GD2120 at MiWiFi-R3L-srv
> > You might miss it.
> >
> > About this exporting, I ever posted patch to upstream and we have had
> > discussion, please check
> > https://lore.kernel.org/patchwork/patch/723472/
> >
> > In makedumpfile and crash, we have had a clear method to analyze and
> > deduce it from kcore or vmcore.
> >
> > Thanks
> > Baoquan
> >
> > On 10/27/18 at 04:13am, Bhupesh Sharma wrote:
> > > Since commit 23c85094fe1895caefdd
> > > ["proc/kcore: add vmcoreinfo note to /proc/kcore"]), '/proc/kcore'
> > > contains a new PT_NOTE which carries the VMCOREINFO information.
> > >
> > > If the same is available, one can use it in user-land to
> > > retrieve machine specific symbols or strings being appended to the
> > > vmcoreinfo even for live-debugging of the primary kernel as a
> > > standard interface exposed by kernel for sharing machine specific
> > > details with the user-land.
> > >
> > > In the past I had a discussion with James, where he suggested this
> > > approach (please see [0]) and I really liked the idea. Since then I
> > > have been working on unifying the implementations of
> > > (atleast) the commonly used user-space utilities that provide
> > > live-debugging capabilities (tools like 'makedumpfile' and
> > > 'crash-utility', see [1] for details of these tools).
> > >
> > > For the same, when live debugging on x86_64 machines, user-space
> > > tools currently rely on different mechanisms to determine
> > > the 'page_offset_base' value (i.e. start of direct mapping of all
> > > physical memory). One of the approach used by 'makedumpfile'
> > > user-space tool for e.g. is to calculate the same from the last
> > > PT_LOAD available in '/proc/kcore', which can be flaky as and when
> > > new sections (for e.g. KCORE_REMAP which was added
> > > to recent kernels) are added to kcore.
> > >
> > > For other architectures like arm64, I have already proposed using
> > > the vmcoreinfo note (in '/proc/kcore') in the user-space utilities to
> > > determine machine specific details like VA_BITS, PAGE_OFFSET,
> > > kasrl_offset() (see [2] for details), for which different user-space
> > > tools earlier used different (and at times flaky) approaches like:
> > >
> > > - Reading kernel CONFIGs from user-space and determining CONFIG values
> > >    like VA_BITS from there.
> > >  - Reading symbols from '/proc/kallsyms' and determining their values
> > >    via '/dev/mem' interface.
> > >  - Reading symbols from 'vmlinux' and determing their values from
> > >    reading memory.
> > >
> > > This patch allows appending 'page_offset_base' for x86_64 platforms
> > > to vmcoreinfo, so that user-space tools can use the same as a standard
> > > interface to determine the start of direct mapping of all physical
> > > memory.
> > >
> > > Testing:
> > > -------
> > >  - I tested this patch (rebased on 'linux-next') on a x86_64 machine
> > >    using the modified 'makedumpfile' user-space code (see [3] for my
> > >    github tree which contains the same) for determining how many pages
> > >    are dumpable when different dump_level is specified (which is
> > >    one use-case of live-debugging via 'makedumpfile').
> > >  - I tested both the KASLR and non-KASLR boot cases with this patch.
> > >  - Here is one sample log (for KASLR boot case) on my x86_64 machine:
> > >
> > >    < snip..>
> > >    The kernel doesn't support mmap(),read() will be used instead.
> > >
> > >    TYPE               PAGES                   EXCLUDABLE      DESCRIPTION
> > >    ----------------------------------------------------------------------
> > >    ZERO               21299                   yes             Pages filled
> > >    with zero
> > >    NON_PRI_CACHE      91785                   yes             Cache
> > >    pages without private flag
> > >    PRI_CACHE  1                       yes             Cache pages with
> > >    private flag
> > >    USER               14057                   yes             User process
> > >    pages
> > >    FREE               740346                  yes             Free pages
> > >    KERN_DATA  58152                   no              Dumpable kernel
> > >    data
> > >
> > >    page size:         4096
> > >    Total pages on system:     925640
> > >    Total size on system:      3791421440       Byte
> > >
> > > I understand that there might be some reservations about exporting
> > > such machine-specific details in the vmcoreinfo, but to unify
> > > the implementations across user-land and archs, perhaps this would be
> > > good starting point to start a discussion.
> > >
> > > [0]. https://www.mail-archive.com/kexec@lists.infradead.org/msg20300.html
> > > [1]. MAN pages -> MAKEDUMPFILE(8) and CRASH(8)
> > > [2]. https://www.spinics.net/lists/kexec/msg21608.html
> > >      http://lists.infradead.org/pipermail/kexec/2018-October/021725.html
> > > [3]. https://github.com/bhupesh-sharma/makedumpfile/tree/add-page-offset-base-to-vmcore-v1
> > >
> > > Cc: Boris Petkov <bp at alien8.de>
> > > Cc: Baoquan He <bhe at redhat.com>
> > > Cc: Ingo Molnar <mingo at kernel.org>
> > > Cc: Thomas Gleixner <tglx at linutronix.de>
> > > Cc: Kazuhito Hagio <k-hagio at ab.jp.nec.com>
> > > Cc: Dave Anderson <anderson at redhat.com>
> > > Cc: James Morse <james.morse at arm.com>
> > > Cc: Omar Sandoval <osandov at fb.com>
> > > Cc: x86 at kernel.org
> > > Cc: kexec at lists.infradead.org
> > > Cc: linux-arm-kernel at lists.infradead.org
> > > Signed-off-by: Bhupesh Sharma <bhsharma at redhat.com>
> > > ---
> > >  arch/x86/kernel/machine_kexec_64.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
> > > index 4c8acdfdc5a7..834ccefef867 100644
> > > --- a/arch/x86/kernel/machine_kexec_64.c
> > > +++ b/arch/x86/kernel/machine_kexec_64.c
> > > @@ -356,6 +356,7 @@ void arch_crash_save_vmcoreinfo(void)
> > >       VMCOREINFO_SYMBOL(init_top_pgt);
> > >       vmcoreinfo_append_str("NUMBER(pgtable_l5_enabled)=%d\n",
> > >                       pgtable_l5_enabled());
> > > +     VMCOREINFO_NUMBER(page_offset_base);
> > >
> > >  #ifdef CONFIG_NUMA
> > >       VMCOREINFO_SYMBOL(node_data);
> > > --
> > > 2.7.4
> > >



More information about the kexec mailing list