[PATCH 09/17] kexec_file: Remove mis-use of sh_offset field

[Philipp Rudo]

The current code uses the sh_offset field in purgatory_info->sechdrs to
store a pointer to the current load address of the section. Depending
whether the section will be loaded or not this is either a pointer into
purgatory_info->purgatory_buf or kexec_purgatory. This is not only a
violation of the ELF standard but also makes the code very hard to
understand as you cannot tell if the memory you are using is read-only or
not.

Remove this mis-use and store the offset of the section in
pugaroty_info->purgatory_buf in sh_offset.

Signed-off-by: Philipp Rudo <prudo at linux.vnet.ibm.com>
---
 arch/x86/kernel/machine_kexec_64.c | 10 ++++++----
 kernel/kexec_file.c                | 33 +++------------------------------
 2 files changed, 9 insertions(+), 34 deletions(-)

diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 6be04e4d4a7e..cf233e878d28 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -457,13 +457,15 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 		 * rel[i].r_offset contains byte offset from beginning
 		 * of section to the storage unit affected.
 		 *
-		 * This is location to update (->sh_offset). This is temporary
-		 * buffer where section is currently loaded. This will finally
-		 * be loaded to a different address later, pointed to by
+		 * This is location to update. This is temporary buffer
+		 * where section is currently loaded. This will finally be
+		 * loaded to a different address later, pointed to by
 		 * ->sh_addr. kexec takes care of moving it
 		 *  (kexec_load_segment()).
 		 */
-		location = (void *)(section->sh_offset + rel[i].r_offset);
+		location = pi->purgatory_buf;
+		location += section->sh_offset;
+		location += rel[i].r_offset;
 
 		/* Final address of the location */
 		address = section->sh_addr + rel[i].r_offset;
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 746b91e46e34..25b44d1a664a 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -736,28 +736,6 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 	       pi->ehdr->e_shnum * sizeof(Elf_Shdr));
 	pi->sechdrs = sechdrs;
 
-	/*
-	 * We seem to have multiple copies of sections. First copy is which
-	 * is embedded in kernel in read only section. Some of these sections
-	 * will be copied to a temporary buffer and relocated. And these
-	 * sections will finally be copied to their final destination at
-	 * segment load time.
-	 *
-	 * Use ->sh_offset to reflect section address in memory. It will
-	 * point to original read only copy if section is not allocatable.
-	 * Otherwise it will point to temporary copy which will be relocated.
-	 *
-	 * Use ->sh_addr to contain final address of the section where it
-	 * will go during execution time.
-	 */
-	for (i = 0; i < pi->ehdr->e_shnum; i++) {
-		if (sechdrs[i].sh_type == SHT_NOBITS)
-			continue;
-
-		sechdrs[i].sh_offset = (unsigned long)pi->ehdr +
-						sechdrs[i].sh_offset;
-	}
-
 	offset = 0;
 	bss_addr = kbuf->mem + kbuf->bufsz;
 	kbuf->image->start = pi->ehdr->e_entry;
@@ -786,17 +764,12 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 			kbuf->image->start += kbuf->mem + offset;
 		}
 
-		src = (void *)sechdrs[i].sh_offset;
+		src = (void *)pi->ehdr + sechdrs[i].sh_offset;
 		dst = pi->purgatory_buf + offset;
 		memcpy(dst, src, sechdrs[i].sh_size);
 
 		sechdrs[i].sh_addr = kbuf->mem + offset;
-
-		/*
-		 * This section got copied to temporary buffer. Update
-		 * ->sh_offset accordingly.
-		 */
-		sechdrs[i].sh_offset = (unsigned long)dst;
+		sechdrs[i].sh_offset = offset;
 		offset += sechdrs[i].sh_size;
 	}
 
@@ -1006,7 +979,7 @@ int kexec_purgatory_get_set_symbol(struct kimage *image, const char *name,
 		return -EINVAL;
 	}
 
-	sym_buf = (char *)sec->sh_offset + sym->st_value;
+	sym_buf = (char *)pi->purgatory_buf + sec->sh_offset + sym->st_value;
 
 	if (get_value)
 		memcpy((void *)buf, sym_buf, size);
-- 
2.13.5