[PATCH v6 26/34] iommu/amd: Allow the AMD IOMMU to work with memory encryption
Tom Lendacky
thomas.lendacky at amd.com
Wed Jun 14 13:40:28 PDT 2017
On 6/14/2017 12:42 PM, Borislav Petkov wrote:
> On Wed, Jun 07, 2017 at 02:17:45PM -0500, Tom Lendacky wrote:
>> The IOMMU is programmed with physical addresses for the various tables
>> and buffers that are used to communicate between the device and the
>> driver. When the driver allocates this memory it is encrypted. In order
>> for the IOMMU to access the memory as encrypted the encryption mask needs
>> to be included in these physical addresses during configuration.
>>
>> The PTE entries created by the IOMMU should also include the encryption
>> mask so that when the device behind the IOMMU performs a DMA, the DMA
>> will be performed to encrypted memory.
>>
>> Signed-off-by: Tom Lendacky <thomas.lendacky at amd.com>
>> ---
>> arch/x86/include/asm/mem_encrypt.h | 7 +++++++
>> arch/x86/mm/mem_encrypt.c | 30 ++++++++++++++++++++++++++++++
>> drivers/iommu/amd_iommu.c | 36 +++++++++++++++++++-----------------
>> drivers/iommu/amd_iommu_init.c | 18 ++++++++++++------
>> drivers/iommu/amd_iommu_proto.h | 10 ++++++++++
>> drivers/iommu/amd_iommu_types.h | 2 +-
>> include/asm-generic/mem_encrypt.h | 5 +++++
>> 7 files changed, 84 insertions(+), 24 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h
>> index c7a2525..d86e544 100644
>> --- a/arch/x86/include/asm/mem_encrypt.h
>> +++ b/arch/x86/include/asm/mem_encrypt.h
>> @@ -31,6 +31,8 @@ void __init sme_early_decrypt(resource_size_t paddr,
>>
>> void __init sme_early_init(void);
>>
>> +bool sme_iommu_supported(void);
>> +
>> /* Architecture __weak replacement functions */
>> void __init mem_encrypt_init(void);
>>
>> @@ -62,6 +64,11 @@ static inline void __init sme_early_init(void)
>> {
>> }
>>
>> +static inline bool sme_iommu_supported(void)
>> +{
>> + return true;
>> +}
>
> Some more file real-estate saving:
>
> static inline bool sme_iommu_supported(void) { return true; }
>
>> +
>> #endif /* CONFIG_AMD_MEM_ENCRYPT */
>>
>> static inline bool sme_active(void)
>> diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
>> index 5d7c51d..018b58a 100644
>> --- a/arch/x86/mm/mem_encrypt.c
>> +++ b/arch/x86/mm/mem_encrypt.c
>> @@ -197,6 +197,36 @@ void __init sme_early_init(void)
>> protection_map[i] = pgprot_encrypted(protection_map[i]);
>> }
>>
>> +bool sme_iommu_supported(void)
>
> Why is this one exported with all the header file declarations if it is
> going to be used in the iommu code only? IOW, you can make it a static
> function there and save yourself all the exporting.
I was trying to keep all the logic for it here in the SME related files
rather than put it in the iommu code itself. But it is easy enough to
move if you think it's worth it.
>
>> +{
>> + struct cpuinfo_x86 *c = &boot_cpu_data;
>> +
>> + if (!sme_me_mask || (c->x86 != 0x17))
>
> me_mask or sme_active()?
I like using sme_active() outside of the SME-specific files and using
sme_me_mask in the SME-specific files to save any changes that will have
to be made once SEV comes around.
>
> Or is the IOMMU "disabled" in a way the moment the BIOS decides that SME
> can be enabled?
There's a fix in the AGESA layer of the BIOS that permits the IOMMU to
function properly when SME is enabled. Unfortunately, the only easy way
to determine if that fix is available is through the patch level check.
>
> Also, family checks are always a bad idea for enablement. Why do we need
> the family check? Because future families will work with the IOMMU? :-)
Yes, any future family that supports SME will (should) work with the
IOMMU without having to check patch levels.
>
>> + return true;
>> +
>> + /* For Fam17h, a specific level of support is required */
>> + switch (c->microcode & 0xf000) {
>
> Also, you said in another mail on this subthread that c->microcode
> is not yet set. Are you saying, that the iommu init gunk runs before
> init_amd(), where we do set c->microcode?
>
> If so, we can move the setting to early_init_amd() or so.
I'll look into that.
>
>> + case 0x0000:
>> + return false;
>> + case 0x1000:
>> + switch (c->microcode & 0x0f00) {
>> + case 0x0000:
>> + return false;
>> + case 0x0100:
>> + if ((c->microcode & 0xff) < 0x26)
>> + return false;
>> + break;
>> + case 0x0200:
>> + if ((c->microcode & 0xff) < 0x05)
>> + return false;
>> + break;
>> + }
>
> So this is the microcode revision, why those complex compares? Can't you
> simply check a range of values?
I'll look into simplifying the checks.
>
>> + break;
>> + }
>> +
>> + return true;
>> +}
>> +
>> /* Architecture __weak replacement functions */
>> void __init mem_encrypt_init(void)
>> {
>> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
>> index 63cacf5..94eb130 100644
>> --- a/drivers/iommu/amd_iommu.c
>> +++ b/drivers/iommu/amd_iommu.c
>> @@ -544,7 +544,7 @@ static void dump_dte_entry(u16 devid)
>>
>> static void dump_command(unsigned long phys_addr)
>> {
>> - struct iommu_cmd *cmd = phys_to_virt(phys_addr);
>> + struct iommu_cmd *cmd = iommu_phys_to_virt(phys_addr);
>> int i;
>>
>> for (i = 0; i < 4; ++i)
>> @@ -863,13 +863,15 @@ static void copy_cmd_to_buffer(struct amd_iommu *iommu,
>> writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
>> }
>>
>> -static void build_completion_wait(struct iommu_cmd *cmd, u64 address)
>> +static void build_completion_wait(struct iommu_cmd *cmd, volatile u64 *sem)
>
> WARNING: Use of volatile is usually wrong: see Documentation/process/volatile-considered-harmful.rst
> #134: FILE: drivers/iommu/amd_iommu.c:866:
> +static void build_completion_wait(struct iommu_cmd *cmd, volatile u64 *sem)
>
The semaphore area is written to by the device so the use of volatile is
appropriate in this case.
Thanks,
Tom
>> {
>> + u64 address = iommu_virt_to_phys((void *)sem);
>> +
>> WARN_ON(address & 0x7ULL);
>>
>> memset(cmd, 0, sizeof(*cmd));
>> - cmd->data[0] = lower_32_bits(__pa(address)) | CMD_COMPL_WAIT_STORE_MASK;
>> - cmd->data[1] = upper_32_bits(__pa(address));
>> + cmd->data[0] = lower_32_bits(address) | CMD_COMPL_WAIT_STORE_MASK;
>> + cmd->data[1] = upper_32_bits(address);
>> cmd->data[2] = 1;
>> CMD_SET_TYPE(cmd, CMD_COMPL_WAIT);
>
> <... snip stuff which Joerg needs to review... >
>
>> diff --git a/include/asm-generic/mem_encrypt.h b/include/asm-generic/mem_encrypt.h
>> index fb02ff0..bbc49e1 100644
>> --- a/include/asm-generic/mem_encrypt.h
>> +++ b/include/asm-generic/mem_encrypt.h
>> @@ -27,6 +27,11 @@ static inline u64 sme_dma_mask(void)
>> return 0ULL;
>> }
>>
>> +static inline bool sme_iommu_supported(void)
>> +{
>> + return true;
>> +}
>
> Save some more file real-estate... you get the idea by now, I'm sure.
>
> :-)
>
More information about the kexec
mailing list